Due to an NVIDIA driver bug with the Windows 10 Anniversary Update,
there are an increasingly large number of reports of "Device Removed"
errors and TDRs. When this happens, OBS stops outputting all data
because all graphics functions are failing, and it appears to just
"freeze up" for users.
To temporarily alleviate this issue while waiting for it to be fixed,
the D3D subsystem can be rebuilt when that happens, all assets can be
reloaded to ensure that it can continue functioning (with a minor hiccup
in playback).
To allow rebuilding the entire D3D subsystem, all objects that contain
D3D references must be part of a linked list (with a few exceptions) so
we can quickly traverse them all whenever needed, and all data for those
resources (static resources primarily, such as shaders, textures, index
buffers, vertex buffers) must be stored in RAM so they can be recreated
whenever needed.
Then if D3D reports a "device removed" or "device reset" error, all D3D
references must first be fully released with no stray references; the
linked list must be fully traversed until all references are released.
Then, the linked list must once again be traversed again, and all those
D3D objects must be recreated with the same data and descriptors (which
are now saved in each object). Finally, all states need to be reset.
After that's complete, the device is able to continue functioning almost
as it was before, although the output to recording/stream may get a few
green frames due to texture data being reset.
This will temporarily alleviate the "Device Removed" issue while waiting
for a fix from NVIDIA.
Unloads all device data and clears all device references. Probably not
necessary, but it's unknown how D3D11 handles this internally so
probably best to be safe.
When DirectX throws error 0x887A0005 (DXGI_ERROR_DEVICE_REMOVED),
Microsoft recommends calling ID3D11Device::GetDeviceRemovedReason to
retrieve a more precise error code.
Closesjp9000/obs-studio#652
This allows the ability to separate the blend states of color and alpha.
The default blend state has also changed so that alpha is always added
together to ensure that the destination image always gets an alpha value
that is actually usable after the operation (for render targets).
Old default state:
color source: GS_BLEND_SRCALPHA, color dest: GS_BLEND_INVSRCALPHA
alpha source: GS_BLEND_SRCALPHA, alpha dest: GS_BLEND_INVSRCALPHA
New default state:
color source: GS_BLEND_SRCALPHA, color dest: GS_BLEND_INVSRCALPHA
alpha source: GS_BLEND_ONE, alpha dest: GS_BLEND_ONE
We have a sprintf_s function in mingw-w64, but it's the it won't compile
with visual studio because it's the C11 specification (aka the correct
specification that's not made by morons). Microsoft's version differs
to the specification (and is made by morons), so fall back to sprintf
(note if you can't tell, this commit message was edited by Jim)
The gs_enum_adapters function is an optional implementation to allow
enumeration of available graphics adapters that can be used with the
program. The ID associated with the adapter can be an index or a hash
depending on the implementation.
I do not want the D3D11 library to depend on a specific compiler
version. This way, I do not have to distribute D3D Compiler libraries
with the program (proprietary binary blobs). Any particular version
works because the API for the D3DCompiler function appears to be the
same; the only things that change are other features and additions
mostly (at least as far as I can tell). Using any version available on
the system should be more than sufficient rather than depending on some
specific D3D compiler version.
If the user doesn't have it, a download of the latest D3D distributables
should be fine, though it should work with the ones that come with
windows 7+ as well.
This Fixes a minor flaw with the API where data had to always be mutable
to be usable by the API.
Functions that do not modify the fundamental underlying data of a
structure should be marked as constant, both for safety and to signify
that the parameter is input only and will not be modified by the
function using it.
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
The alpha source and destination blend values were always being set to
one and zero, when they should have been set to the same as the color
values. This caused the alpha of the source texture to always overwrite
the alpha of the destination texture, rather than apply the blend
function upon it. Needless to say that it seriously screwed up the
render target if you rendered something with alpha on it.
Thanks to paibox for pointing this issue out and yelling at me to fix
it. I apologize for not getting to this sooner.
Changed API functions:
libobs: obs_reset_video
Before, video initialization returned a boolean, but "failed" is too
little information, if it fails due to lack of device capabilities or
bad video device parameters, the front-end needs to know that.
The OBS Basic UI has also been updated to reflect this API change.
NOTE: In texture_setimage, I had to move variables to the top of the
scope because microsoft's C compiler will give the legacy C90 error of:
'illegal use of this type as an expression'.
To sum it up, microsoft's C compiler is still utter garbage.
...I'm actually concerned that I went a bit overkill trying to prevent
backwards compatibility issues with this abstraction design, because
this is a large number of files that have to be modified just to add a
single graphics subsystem export. Someone's going to strangle me, and
when you know that someone might strangle you, that means that you did
something wrong. We'll have to look in to simplifying this in the
future without killing backward compatibility safety.
These functions were mostly related to being able to set true fullscreen
mode -- however, this has no place for our purposes, and these functions
were just sitting empty and unused, so they should be removed.
Besides, fullscreen mode only applies to the windows operating system.
This variable is currently somewhat pointless, I was originally going to
use it to tell the graphics subsystem to completely rebuild the internal
vertex buffers, but it would be bad/inefficient to allow that
functionality.
- Add dummy GL texture support to allow libobs texture references to be
created for GL without
- Add a texture_getobj function to allow the retrieval of the
context-specific object, such as the D3D texture pointer, or the
OpenGL texture object handle.
- Also cleaned up the export stuff. I realized it was all totally
superfluous. Kind of a dumb moment, but nice to clean it up
regardless.
- Implement OBS encoder interface. It was previously incomplete, but
now is reaching some level of completion, though probably should
still be considered preliminary.
I had originally implemented it so that encoders only have a 'reset'
function to reset their parameters, but I felt that having both a
'start' and 'stop' function would be useful.
Encoders are now assigned to a specific video/audio media output each
rather than implicitely assigned to the main obs video/audio
contexts. This allows separate encoder contexts that aren't
necessarily assigned to the main video/audio context (which is useful
for things such as recording specific sources). Will probably have
to do this for regular obs outputs as well.
When creating an encoder, you must now explicitely state whether that
encoder is an audio or video encoder.
Audio and video can optionally be automatically converted depending
on what the encoder specifies.
When something 'attaches' to an encoder, the first attachment starts
the encoder, and the encoder automatically attaches to the media
output context associated with it. Subsequent attachments won't have
the same effect, they will just start receiving the same encoder data
when the next keyframe plays (along with SEI if any). When detaching
from the encoder, the last detachment will fully stop the encoder and
detach the encoder from the media output context associated with the
encoder.
SEI must actually be exported separately; because new encoder
attachments may not always be at the beginning of the stream, the
first keyframe they get must have that SEI data in it. If the
encoder has SEI data, it needs only add one small function to simply
query that SEI data, and then that data will be handled automatically
by libobs for all subsequent encoder attachments.
- Implement x264 encoder plugin, move x264 files to separate plugin to
separate necessary dependencies.
- Change video/audio frame output structures to not use const
qualifiers to prevent issues with non-const function usage elsewhere.
This was an issue when writing the x264 encoder, as the x264 encoder
expects non-const frame data.
Change stagesurf_map to return a non-const data type to prevent this
as well.
- Change full range parameter of video scaler to be an enum rather than
boolean
- Implement windows monitor capture (code is so much cleaner than in
OBS1). Will implement duplication capture later
- Add GDI texture support to d3d11 graphics library
- Fix precision issue with sleep timing, you have to call
timeBeginPeriod otherwise windows sleep will be totally erratic.
Ryan Foster
jp9000
martell
paibox
Palana
BtbN