If you don't need to see what's displayed, then this is particularly
useful for two reasons:
1. It reduces the number of draw/present calls
2. It can prevent issues with certain hardware setups where rendering on
a monitor hooked up to a separate card can experience slowdowns
The "last" filter that's rendered is technically at filter index 0, so
enumeration needs to be from the last index in the list to the first
index in the list.
Core API functions changed:
-----------------------------
EXPORT bool obs_reset_audio(struct audio_output_info *aoi);
EXPORT bool obs_get_audio_info(struct audio_output_info *aoi);
To:
-----------------------------
EXPORT bool obs_reset_audio(const struct obs_audio_info *oai);
EXPORT bool obs_get_audio_info(struct obs_audio_info *oai);
Core structure added:
-----------------------------
struct obs_audio_info {
uint32_t samples_per_sec;
enum speaker_layout speakers;
uint64_t buffer_ms;
};
Non-interleaved (planar) floating point output is standard with audio
filtering, so to prevent audio filters from having to worry about
different audio format implementations and for the sake consistency
between user interfaces, make it so that audio is always set to
non-interleaved floating point output.
The main view does not need to worry about hiding/deactivation of
sources when it's being freed here, when the obs context is shutting
down in this section of obs, all the sources are being freed, thus
there's no need to worry about deactivating/hiding sources.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
A slightly refactored version of R1CH's crash handler, allows crash
handling for windows which provides stack traces of all threads and a
list of all loaded modules. Also shows the processor, windows version,
and current libobs version.
Previously, the design for the interaction between the encoder thread
and the graphics thread was that the encoder thread would signal to the
graphics thread when to start drawing each frame. The original idea
behind this was to prevent mutually cascading stalls of encoding or
graphics rendering (i.e., if rendering took too long, then encoding
would have to catch up, then rendering would have to catch up again, and
so on, cascading upon each other). The ultimate goal was to prevent
encoding from impacting graphics and vise versa.
However, eventually it was realized that there were some fundamental
flaws with this design.
1. Stray frame duplication. You could not guarantee that a frame would
render on time, so sometimes frames would unintentionally be lost if
there was any sort of minor hiccup or if the thread took too long to
be scheduled I'm guessing.
2. Frame timing in the rendering thread was less accurate. The only
place where frame timing was accurate was in the encoder thread, and
the graphics thread was at the whim of thread scheduling. On higher
end computers it was typically fine, but it was just generally not
guaranteed that a frame would be rendered when it was supposed to be
rendered.
So the solution (originally proposed by r1ch and paibox) is to instead
keep the encoding and graphics threads separate as usual, but instead of
the encoder thread controlling the graphics thread, the graphics thread
now controls the encoder thread. The encoder thread keeps a limited
cache of frames, then the graphics thread copies frames in to the cache
and increments a semaphore to schedule the encoder thread to encode that
data.
In the cache, each frame has an encode counter. If the frame cache is
full (e.g., the encoder taking too long to return frames), it will not
cache a new frame, but instead will just increment the counter on the
last frame in the cache to schedule that frame to encode again, ensuring
that frames are on time and reducing CPU usage by lowering video
complexity. If the graphics thread takes too long to render a frame,
then it will add that frame with the count value set to the total amount
of frames that were missed (actual legitimately duplicated frames).
Because the cache gives many frames of breathing room for the encoder to
encode frames, this design helps improve results especially when using
encoding presets that have higher complexity and CPU usage, minimizing
the risk of needlessly skipped or duplicated frames.
I also managed to sneak in what should be a bit of an optimization to
reduce copying of frame data, though how much of an optimization it
ultimately ends up being is debatable.
So to sum it up, this commit increases accuracy of frame timing,
completely removes stray frame duplication, gives better results for
higher complexity encoding presets, and potentially optimizes the frame
pipeline a tiny bit.
The boolean variables which stored whether frames have been
rendered/downloaded/converted/etc were not being reset when video
restarted, causing frames to not be sent in the correct order whenever
video was reset. This could lead to minor desync of video/audio.
This adds bicubic and lanczos scaling capability to libobs to improve
scaling quality and sharpness when the output resolution has to be
scaled relative to the base resolution. Bilinear is also available,
although bilinear has rather poor quality and causes scaling to appear
blurry.
If the output resolution is close to the base resolution, then bilinear
is used instead as an optimization, as there's no need to use these
shaders if scaling is not in use.
The Bicubic and Lanczos effects are also exposed via exported function
to allow the ability to use those shaders in plugin modules if desired.
The API change adds a variable 'scale_type' to the obs_video_info
structure that allows the user interface to choose what type of scaling
filter should be used.
This was an important change because we were originally using an
hard-coded 709/partial range color matrix for the output, which was
causing problems for people wanting to use different formats or color
spaces. This will now automatically generate the color matrix depending
on the format, color space, and range, or use an identity matrix if the
video format is RGB instead of YUV.
At the start of each render loop, it would get the timestamp, and then
it would then assign that timestamp to whatever frame was downloaded.
However, the frame that was downloaded was usually occurred a number of
frames ago, so it would assign the wrong timestamp value to that frame.
This fixes that issue by storing the timestamps in a circular buffer.
The graphics subsystem was not being freed here, for example if a
required effect failed to compile it would still successfully have the
graphics subsystem sans required effect. The graphics subsystem should
be completely shut down if required libobs effects fail to compile.
This Fixes a minor flaw with the API where data had to always be mutable
to be usable by the API.
Functions that do not modify the fundamental underlying data of a
structure should be marked as constant, both for safety and to signify
that the parameter is input only and will not be modified by the
function using it.
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
This makes it easier to do two things:
1.) Get the skipped frames count relative to each specific output
2.) Make it so that getting the 'current' log will always contain
information about skipped frames. Before, you'd have to force the
user to restart the program and get the last log, which was really
annoying when you just wanted to see how the encoders were
performing.
Instead of having functions like obs_signal_handler() that can fail to
properly specify their actual intent in the name (does it signal a
handler, or does it return a signal handler?), always prefix functions
that are meant to get information with 'get' to make its functionality
more explicit.
Previous names: New names:
-----------------------------------------------------------
obs_audio obs_get_audio
obs_video obs_get_video
obs_signalhandler obs_get_signal_handler
obs_prochandler obs_get_proc_handler
obs_source_signalhandler obs_source_get_signal_handler
obs_source_prochandler obs_source_get_proc_handler
obs_output_signalhandler obs_output_get_signal_handler
obs_output_prochandler obs_output_get_proc_handler
obs_service_signalhandler obs_service_get_signal_handler
obs_service_prochandler obs_service_get_proc_handler
API Removed:
- graphics_t obs_graphics();
Replaced With:
- void obs_enter_graphics();
- void obs_leave_graphics();
Description:
obs_graphics() was somewhat of a pointless function. The only time
that it was ever necessary was to pass it as a parameter to
gs_entercontext() followed by a subsequent gs_leavecontext() call after
that. So, I felt that it made a bit more sense just to implement
obs_enter_graphics() and obs_leave_graphics() functions to do the exact
same thing without having to repeat that code. There's really no need
to ever "hold" the graphics pointer, though I suppose that could change
in the future so having a similar function come back isn't out of the
question.
Still, this at least reduces the amount of unnecessary repeated code for
the time being.
Changed:
- obs_source_gettype
To:
- enum obs_source_type obs_source_get_type(obs_source_t source);
- const char *obs_source_get_id(obs_source_t source);
This function was inconsistent for a number of reasons. First, it
returns both the ID and the type of source (input/transition/filter),
which is inconsistent with the name of "get type". Secondly, the
'squishy' naming convention which has just turned out to be bad
practice and causes inconsistencies. So it's now replaced with two
functions that just return the type and the ID.
Changed API:
- char *obs_find_plugin_file(const char *sub_path);
Changed to: char *obs_module_file(const char *file);
Cahnge it so you no longer need to specify a sub-path such as:
obs_find_plugin_file("module_name/file.ext")
Instead, now automatically handle the module data path so all you need
to do is:
obs_module_file("file.ext")
- int obs_load_module(const char *name);
Changed to: int obs_open_module(obs_module_t *module,
const char *path,
const char *data_path);
bool obs_init_module(obs_module_t module);
Change the module loading API so that if the front-end chooses, it can
load modules directly from a specified path, and associate a data
directory with it on the spot.
The module will not be initialized immediately; obs_init_module must
be called on the module pointer in order to fully initialize the
module. This is done so a module can be disabled by the front-end if
the it so chooses.
New API:
- void obs_add_module_path(const char *bin, const char *data);
These functions allow you to specify new module search paths to add,
and allow you to search through them, or optionally just load all
modules from them. If the string %module% is included, it will
replace it with the module's name when that string is used as a
lookup. Data paths are now directly added to the module's internal
storage structure, and when obs_find_module_file is used, it will look
up the pointer to the obs_module structure and get its data directory
that way.
Example:
obs_add_module_path("/opt/obs/my-modules/%module%/bin",
"/opt/obs/my-modules/%module%/data");
This would cause it to additionally look for the binary of a
hypthetical module named "foo" at /opt/obs/my-modules/foo/bin/foo.so
(or libfoo.so), and then look for the data in
/opt/obs/my-modules/foo/data.
This gives the front-end more flexibility for handling third-party
plugin modules, or handling all plugin modules in a custom way.
- void obs_find_modules(obs_find_module_callback_t callback, void
*param);
This searches the existing paths for modules and calls the callback
function when any are found. Useful for plugin management and custom
handling of the paths by the front-end if desired.
- void obs_load_all_modules(void);
Search through the paths and both loads and initializes all modules
automatically without custom handling.
- void obs_enum_modules(obs_enum_module_callback_t callback,
void *param);
Enumerates currently opened modules.
The version macro that modules use to compile versus the actual core
version that may be in use may be different, so this is a way to compare
them to check for compatibility issues later on.
Changed API functions:
libobs: obs_reset_video
Before, video initialization returned a boolean, but "failed" is too
little information, if it fails due to lack of device capabilities or
bad video device parameters, the front-end needs to know that.
The OBS Basic UI has also been updated to reflect this API change.
There was no need to call the context free function in the
initialization function, and it's safer to just initialize the memory to
0 before using (which also negates the need for da_init)
This just ensures that if an obs object is renamed that the pointer to
older names will still be valid. Prevents renames from causing any
invalid memory access.
When the obs object is destroyed, so are the cached names.
The module callback obs_module_set_locale will be called after loading
the module, and any time the locale is manually changed via core API.
When this function is called, the module is expected to load new text
lookup values for all the text it uses based upon the current locale.
jp9000
Palana
Christoph Hohmann
GoaLitiuM