Added github gist API uploading to the help menu to help make problems a
bit easier to debug in the future. It's somewhat vital that this
functionality be implemented before any release in order to analyze any
given problem a user may be experiencing.
Add a 'source selection' dialog to replace the 'enter a name' dialog.
This new dialog allows you to make new instances of pre-existing sources
so that you can add a pre-existing source to a different scene, or in to
the same scene more than once.
Also started implementing locale.
Comtemplating switching to JSON-based locale later, so we can add things
like descriptions/disambiguation, and so we can use jansson's built-in
hash table when doing the string lookup.
- Add volume control
These volume controls are basically nothing more than sliders. They
look terrible and hopefully will be as temporary as they are
terrible.
- Allow saving of specific non-user sources via obs_load_source and
obs_save_source functions.
- Save data of desktop/mic audio sources (sync data, volume data, etc),
and load the data on startup.
- Make it so that a scene is created by default if first time using the
application. On certain operating systems where supported, a default
capture will be created. Desktop capture on mac, particularly. Not
sure what to do about windows because monitor capture on windows 7 is
completely terrible and is bad to start users off with.
- Updated the services API so that it links up with an output and
the output gets data from that service rather than via settings.
This allows the service context to have control over how an output is
used, and makes it so that the URL/key/etc isn't necessarily some
static setting.
Also, if the service is attached to an output, it will stick around
until the output is destroyed.
- The settings interface has been updated so that it can allow the
usage of service plugins. What this means is that now you can create
a service plugin that can control aspects of the stream, and it
allows each service to create their own user interface if they create
a service plugin module.
- Testing out saving of current service information. Saves/loads from
JSON in to obs_data_t, seems to be working quite nicely, and the
service object information is saved/preserved on exit, and loaded
again on startup.
- I agonized over the settings user interface for days, and eventually
I just decided that the only way that users weren't going to be
fumbling over options was to split up the settings in to simple/basic
output, pre-configured, and then advanced for advanced use (such as
multiple outputs or services, which I'll implement later).
This was particularly painful to really design right, I wanted more
features and wanted to include everything in one interface but
ultimately just realized from experience that users are just not
technically knowledgable about it and will end up fumbling with the
settings rather than getting things done.
Basically, what this means is that casual users only have to enter in
about 3 things to configure their stream: Stream key, audio bitrate,
and video bitrate. I am really happy with this interface for those
types of users, but it definitely won't be sufficient for advanced
usage or for custom outputs, so that stuff will have to be separated.
- Improved the JSON usage for the 'common streaming services' context,
I realized that JSON arrays are there to ensure sorting, while
forgetting that general items are optimized for hashing. So
basically I'm just using arrays now to sort items in it.
This plugin is just a generic service plugin for basic RTMP streaming
service stuff.
This just has a 'common' service that has a list of common/simple
streaming services that don't have their own custom service modules, and
then a 'custom' service that allows you to enter in the stream URL and
key manually, without a service/server list.
Also, copy the jansson VS projects file (don't modify the old one) so
that it's located in the vs/2013 directory, so that other libraries can
properly link with it without having to enter in extra information just
to include jansson
The test program and test filter wasn't working properly because the ID
for it had actually changed.
The test programs also weren't updated for the new main render callbacks
which must be used when making a program.
Ensure that a source has a valid name. Duplicates aren't a big deal
internally, but sources without a name are probably something that
should be avoided. Made is so that if a source is programmatically
created without a name, it's assigned an index based name.
In the main basic-mode window, made it check to make sure the name was
valid as well.
- Implement windows monitor capture (code is so much cleaner than in
OBS1). Will implement duplication capture later
- Add GDI texture support to d3d11 graphics library
- Fix precision issue with sleep timing, you have to call
timeBeginPeriod otherwise windows sleep will be totally erratic.
This allows the changing of bideo settings without having to completely
reset all graphics data. Will recreate internal output/conversion
buffers and such and reset the main preview.
Turns out that on some adapters, due to some sort of internal GPU
precision error, fmod(x, y) can return x when x == y, wich is incorrect
(and no, they were actually equal, not off due to precision errors).
This would cause the shader to sample wrong coordinates on the edges
sometimes. Just adding 0.1 to the x value before being put in to fmod
and then flooring the result after fixes the issue.
- Changed glMapBuffer to glMapBufferRange to allow invalidation. Using
just glMapBuffer alone was causing some unacceptable stalls.
- Changed dynamic buffers from GL_DYNAMIC_WRITE to GL_STREAM_WRITE
because I had misunderstood the OpenGL specification
- Added _OPENGL and _D3D11 builtin preprocessor macros to effects to
allow special processing if needed
- Added fmod support to shaders (NOTE: D3D and GL do not function
identically with negative numbers when using this. Positive numbers
however function identically)
- Created a planar conversion shader that converts from packed YUV to
planar 420 right on the GPU without any CPU processing. Reduces
required GPU download size to approximately 37.5% of its normal rate
as well. GPU usage down by 10 entire percentage points despite the
extra required pass.
The API used to be designed in such a way to where it would expect
exports for each individual source/output/encoder/etc. You would export
functions for each and it would automatically load those functions based
on a specific naming scheme from the module.
The idea behind this was that I wanted to limit the usage of structures
in the API so only functions could be used. It was an interesting idea
in theory, but this idea turned out to be flawed in a number of ways:
1.) Requiring exports to create sources/outputs/encoders/etc meant that
you could not create them by any other means, which meant that
things like faruton's .net plugin would become difficult.
2.) Export function declarations could not be checked, therefore if you
created a function with the wrong parameters and parameter types,
the compiler wouldn't know how to check for that.
3.) Required overly complex load functions in libobs just to handle it.
It makes much more sense to just have a load function that you call
manually. Complexity is the bane of all good programs.
4.) It required that you have functions of specific names, which looked
and felt somewhat unsightly.
So, to fix these issues, I replaced it with a more commonly used API
scheme, seen commonly in places like kernels and typical C libraries
with abstraction. You simply create a structure that contains the
callback definitions, and you pass it to a function to register that
definition (such as obs_register_source), which you call in the
obs_module_load of the module.
It will also automatically check the structure size and ensure that it
only loads the required values if the structure happened to add new
values in an API change.
The "main" source file for each module must include obs-module.h, and
must use OBS_DECLARE_MODULE() within that source file.
Also, started writing some doxygen documentation in to the main library
headers. Will add more detailed documentation as I go.
- Implement texture scaling/conversion/downloading for the main view so
we can finally start getting data to output.
Also, redesign how it works a bit, it will now properly wait one full
frame for each step in the process: rendering the main texture,
scaling the main texture to an output texture, staging/downloading the
ouput texture, and then outputting that staged data. This way, the
GPU will have more than enough time to fully complete each step.
- Fix a bug with OpenGL plugin's texture staging function. Was using
glBindBuffer instead of what should have been used: glBindTexture.
- Change the naming scheme of the variables in default.effect. It's now
named with the idea of just "color matrix" in mind instead of "yuv
matrix", and instead of DrawRGBToYUV, it's now just DrawMatrix.
- Move over the last of the original settings dialog code to QT. It was
actually a bit easier to write in the QT version. wxWidgets was
definitely not ideal for that because the pages would fully
create/destroy every time.
- [Win32] Fix os_dlopen so that it only appends .dll if not present
- [MacOS] Fix name dialog text edit widget issue (it would be better if
we could just use the list widget for editing labels, will have to
look in to that in the future)
- Tweak the settings UI a bit more and make 30 FPS default
- Add a macro to convert a QString to a UTF-8 const char * string
- Rename build/plugins to build/obs-plugins
- Remove the last of the wxWidgets code
I added gl-x11 which allows compatibility with X11 (Xlib-based) and GLX.
I also added various functions to handle file finding based on FHS.
Various changes to autotools to both install files correctly and to configure correctly.
jp9000
Socapex
Palana
BtbN
Zachary Lund