Allows the ability to hint at encoders what format should be used.
This is particularly useful if libobs is currently operating in planar
4:4:4, but you want to force an encoder used for streaming to convert to
NV12 to prevent streaming issues.
If you don't need to see what's displayed, then this is particularly
useful for two reasons:
1. It reduces the number of draw/present calls
2. It can prevent issues with certain hardware setups where rendering on
a monitor hooked up to a separate card can experience slowdowns
obs_source_process_filter tried to do everything in a single function,
but the problem is that effect parameters would not properly be
accounted for due to the way it internally draws, therefore it was
necessary to split the functions in to two, you first call
obs_source_process_filter_begin, then you set your effect parameters,
then you finally call obs_source_process_filter_end. This ensures that
when the filter is drawn, that the effect parameters are set.
These functions are primarily for use with filters, filters need to be
able to get the width/height of a target source without it necessarily
getting the post-filtered dimensions.
When a frame is processed by a filter, it comes directly from the
source's video frame cache. However, if a filter is using or processing
those frames for whatever reason, there would be no guarantee that the
frames would persist during processing, and frames could eventually be
deallocated unexpected, for example when the resolution or format
changes.
So the solution is to implement simple reference counting for the frames
so that the frames will exist until they have been released by any
source or filter that's using them.
Core API functions changed:
-----------------------------
EXPORT bool obs_reset_audio(struct audio_output_info *aoi);
EXPORT bool obs_get_audio_info(struct audio_output_info *aoi);
To:
-----------------------------
EXPORT bool obs_reset_audio(const struct obs_audio_info *oai);
EXPORT bool obs_get_audio_info(struct obs_audio_info *oai);
Core structure added:
-----------------------------
struct obs_audio_info {
uint32_t samples_per_sec;
enum speaker_layout speakers;
uint64_t buffer_ms;
};
Non-interleaved (planar) floating point output is standard with audio
filtering, so to prevent audio filters from having to worry about
different audio format implementations and for the sake consistency
between user interfaces, make it so that audio is always set to
non-interleaved floating point output.
API changed from:
------------------------
EXPORT void obs_service_apply_encoder_settings(obs_service_t *service,
obs_encoder_t *video_encoder,
obs_encoder_t *audio_encoder);
void obs_service_info::apply_encoder_settings(void *data
obs_encoder_t *video_encoder,
obs_encoder_t *audio_encoder);
To:
------------------------
EXPORT void obs_service_apply_encoder_settings(obs_service_t *service,
obs_data_t *video_encoder_settings,
obs_data_t *audio_encoder_settings);
void obs_service_info::apply_encoder_settings(void *data
obs_data_t *video_encoder_settings,
obs_data_t *audio_encoder_settings);
These changes make it so that instead of an encoder potentially being
updated more than once with different settings, that these functions
will be called for the specific settings being used, and the settings
will be updated according to what's required by the service.
This fixes that design flaw and ensures that there's no case where
obs_encoder_update is called where the settings might not have
service-specific settings applied.
The obs_source_get_width and obs_source_get_height functions need to
account for filters that may change their width/height such as a crop
filter or something similar.
As a side effect of this commit, because these functions need to lock
the filter mutex, these functions can no longer be used with a
const-qualified obs_source_t pointer.
obs_source_inc_showing and obs_source_dec_showing are used to indicate
that a source is showing or no longer being shown in a particular area
of the program outside from the main render view.
One could use an obs_view, but I felt like it was unnecessary because
using an obs_view just to display a single source feels somewhat
superfluous.
Instead of having services automatically apply encoder settings on
initialization (whether the output wants to or not), instead make it
something that must be explicitly called by the developer. There are
cases where the developer may not wish to apply the service-specific
settings, or may wish to override them for whatever reason.
Before: After:
obs_service_gettype obs_service_get_type
It seems there was an API function that was missed when we were doing
our big API consistency update. Unsquishes obs_service_gettype to
obs_service_get_type.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
The comment says "these are different", but doesn't state why.
Actually, I should really rename the output flags so they're not flags,
but instead just "caps", because that's really all that they are.
If an async video source stops video for whatever reason, it would get
stuck on the last frame that was played. This was particularly awkward
when I wanted to give the user the ability to deactivate a source such
as a webcam because it would get stuck on the last frame.
This changes the way source volume handles transitioning between being
active and inactive states.
The previous way that transitioning handled volume was that it set the
presentation volume of the source and all of its sub-sources to 0.0 if
the source was inactive, and 1.0 if active. Transition sources would
then also set the presentation volume for sub-sources to whatever their
transitioning volume was. However, the problem with this is that the
design didn't take in to account if the source or its sub-sources were
active anywhere else, so because of that it would break if that ever
happened, and I didn't realize that when I was designing it.
So instead, this completely overhauls the design of handling
transitioning volume. Each frame, it'll go through all sources and
check whether they're active or inactive and set the base volume
accordingly. If transitions are currently active, it will actually walk
the active source tree and check whether the source is in a
transitioning state somewhere.
- If the source is a sub-source of a transition, and it's not active
outside of the transition, then the transition will control the
volume of the source.
- If the source is a sub-source of a transition, but it's also active
outside of the transition, it'll defer to whichever is louder.
This also adds a new callback to the obs_source_info structure for
transition sources, get_transition_volume, which is called to get the
transitioning volume of a sub-source.
Changed the design from using obs_source::enum_refs to just simply
preventing infinite source recursion in general, rather than allowing it
through the enum_refs variable. obs_source_add_child has been changed
so that it now returns a boolean, and if the function fails, it means
that the child cannot be added due to that potential recursion.
obs_encoder_getdisplayname declaration was not changed to match the
definition (obs_encoder_get_display_name) when the API consistency
update occurred.
This adds bicubic and lanczos scaling capability to libobs to improve
scaling quality and sharpness when the output resolution has to be
scaled relative to the base resolution. Bilinear is also available,
although bilinear has rather poor quality and causes scaling to appear
blurry.
If the output resolution is close to the base resolution, then bilinear
is used instead as an optimization, as there's no need to use these
shaders if scaling is not in use.
The Bicubic and Lanczos effects are also exposed via exported function
to allow the ability to use those shaders in plugin modules if desired.
The API change adds a variable 'scale_type' to the obs_video_info
structure that allows the user interface to choose what type of scaling
filter should be used.
This was an important change because we were originally using an
hard-coded 709/partial range color matrix for the output, which was
causing problems for people wanting to use different formats or color
spaces. This will now automatically generate the color matrix depending
on the format, color space, and range, or use an identity matrix if the
video format is RGB instead of YUV.
This adds a volume meter object to libobs that can be used by the GUI
or plugins to convert the raw audio level data from sources to values
that can easily be used to display the audio data.
The volume meter object will use the same mapping functions as the
fader object to map dB levels to a scale.
This adds a new library of audio control functions mainly for the use in
GUIS. For now it includes an implementation of a software fader that can
be attached to sources in order to easily control the volume.
The fader can translate between fader-position, volume in dB and
multiplier with a configurable mapping function.
Currently only a cubic mapping (mul = fader_pos ^ 3) is included, but
different mappings can easily be added.
Due to libobs saving/restoring the source volume from the multiplier,
the volume levels for existing source will stay the same, and live
changing of the mapping will work without changing the source volume.
If you look at the previous commits, you'll see I had added
obs_source_draw before. For custom drawn sources in particular, each
time obs_source_draw was called, it would restart the effect and its
passes for each draw call, which was not optimal. It should really use
the effect functions for that. I'll have to add a function to simplify
effect usage.
I also realized that including the color matrix parameters in
obs_source_draw made the function kind of messy to use; instead,
separating the color matrix stuff out to
obs_source_draw_set_color_matrix feels a lot more clean.
On top of that, having the ability to set the position would be nice to
have as well, rather than having to mess with the matrix stuff each
time, so I also added that for the sake of convenience.
obs_source_draw will draw a texture sprite, optionally of a specific
size and/or at a specific position, as well as optionally inverted. The
texture used will be set to the 'image' parameter of whatever effect is
currently active.
obs_source_draw_set_color_matrix will set the color matrix value if the
drawing requires color matrices. It will set the 'color_matrix',
'color_range_min', and 'color_range_max' parameters of whatever effect
is currently active.
Overall, these feel much more clean to use than the previous iteration.
This function simplifies drawing textures for sources in order to help
reduce boilerplate code. If a source is a custom drawn source, it will
automatically set up the effect to draw the sprite. If it's not a
custom drawn source, it will simply draw the sprite as per normal. If
the source uses a specific color matrix, it will also handle that as
well.
Palana
jp9000
Socapex
fryshorts