MicuPack v2.9.3

Minetest modpack by (real)micu.

Tested with following Minetest versions running Minetest Game:

• 0.4.17.1 (stable-0.4 branch) - all modpack versions up to v2.6.1
• 5.0.0+ (stable-5 branch) - from modpack v2.6.2

Installation:

Enter Minetest mod directory and run:

git clone https://github.com/realmicu/minetest-micupack.git micupack

This modpack contains:

• Modern Tables (moderntables)

  Full height wooden and metal tables in two variants: simple and with storage drawer (inventory for 16 items). If Tubelib mod is installed, four-legged machine stand and 4 more tables (designed to match both plain Tubelib and BiogasMachines style) are added as well.

• Miner Tools (minertools)

  Electronic gadgets for professional miners. Inspired by mod called 'Mineral Detector'.

  This mod provides following portable devices:

  • geothermometer - shows temperature variations of solid blocks (water and lava affect block relative temperature - water cools it down while lava warms it up); useful for underground mining to search - or avoid - flooded caverns or lava pools
  • mineral scanner - shows ore count in area around player, selectable range (designed to be a handheld, improved version of Mineral Detector mentioned earlier)
  • mineral finder - short range directional scanner to find nearby deposits of selected mineral; very picky, especially at angles, but driven by simple logic
  • all-in-one versions of above devices, each one with improved characteristics and distance meter module

• SaferLua Programming Tools (slprogtools)

  Devices for interacting with SaferLua Controller from TechPack mod:

  • Memory Copier - portable dongle to transfer code between SL Controllers in much simpler and faster way than copying it with text books; can be write-protected and labelled
  • Memory Programmer - improved Memory Copier, with read/write protection to prevent accidental memory loss and code injection functionality (works like original Programmer but for SL Controllers); it allows to replace special marker in init() section code with array containing collected Tubelib numbers, making redeployments of SL Controllers much easier (for example for mobile mining with Quarries and Pushers)

  Note: due to node's formspec implementation, only inactive tabs can be populated - before code upload/rewrite please change active tab on SaferLua Controller to 'outp' or 'help'.

• Smartline Modules (slmodules)

  This mod adds following Smartline-compatible nodes:

  • Furnace Monitor

    This simple device allows to monitor Minetest Game standard furnace with Tubelib/Smartline devices that are capable of reading Tubelib node state (like SaferLua Controllers etc). It gets standard 4-digit Tubelib ID number and can be referred like any other compatible read-only node. Monitor checks attached node only when status is requested so it does not consume CPU resources when idle (no timers).

    Placement: place on any side of a furnace, make sure back plate of device has contact with monitored node. In case of wrong orientation use screwdriver.

    Status:

    • "fault" - monitor is not placed on a furnace
    • "stopped" - furnace is not smelting/cooking
    • "running" - furnace is smelting/cooking items
    • "standby" - furnace is burning fuel but there are no items loaded

    Punch node to see current status.

  • Digital Switch

    Configurable multi-state switch with one-digit simple decimal LCD display. Its purpose is to enhance SaferLua Controller functionality by providing selectable input via standard Tubelib messaging. SL Controller can be programmed to perform different actions depending on value selected on digital panel. Right after placement, panel is in setup mode and should be configured before use; after successful configration, setup screen is no longer accessible. To change parameters again, simply collect and redeploy node.

    Configuration options:

    • destination number(s) of Controller(s) to send events to (optional, if not set - no messages are sent)
    • set of accepted digits (should be at least one digit or device refuses to start)
    • direction of value change ("up" means increase, "down" decrease); values do wrap around

    Switch value setting is changed with right click, like standard Tubelib buttons.

    To get value currently set on panel, query its status using SaferLua $get_status(NUMBER) function which returns "0" through "9" or "off" if panel is unconfigured. When panel is connected to Controller(s), switch sends "on" events every time it is changed (please note Controller limit of one event per second!)

    Status:

    • "0" .. "9" - current value
    • "off" - placed but not yet configured

    Events (optional):

    • "on" - on digit change

  • AutoSieve Sensor

    This node is a sensor pad for Techpack Automated Gravel Sieve. Although AutoSieve can interact with Tubelib machinery like any other Techpack machine, it does not have Tubelib ID, so it cannot be controlled or monitored. Sensor pad node should be placed directly under AutoSieve. It gets Techpack 4-digit ID and its working principle is identical to Furnace Monitor, allowing standard status query using Tubelib messaging. In addition, reading AutoSieve item counter is also supported. Sensor reads data from attached node only when requested so it does not consume CPU resources when idle (no timers).

    Placement: place directly under Automated Gravel Sieve.

    Status:

    • "fault" - there is no AutoSieve on top of sensor node
    • "stopped" - AutoSieve is not working
    • "running" - AutoSieve is running
    • "defect" - AutoSieve is broken due to aging and needs to be repaired

    Note: there is no "standby" state.

    Supported SaferLua functions:

    • $get_status(...)
    • $get_counter(...)

    Punch node to see current status.

  • Crops Watcher

    Advanced optical device to assist in crop farming automation. It scans rectangular area of selected radius for crops (wheat, tomatoes etc) and checks if all crops are fully grown so they can be collected either manually or by machines. Device recognizes all registered farming nodes. Crops Watcher sees plants at its level and down to 2 levels below its node (-2 .. 0), with exception of nodes directly under its box. Field scan is peformed when device is asked for status - either via standard "state" message or by device-specific status request (Watcher registers new SaferLua command $get_crops_status() for SL Controllers). When Tubelib ID numbers are entered in the configuration panel, scan can also be initiated by sending "on" message to Crops Watcher (by Timer, Button etc). If field is ready for harvest, device immediately responses with "on" command sent to specified IDs (for example Tubelib Harvester). No messages are sent for other crop states - Crops Watcher never sends "off" commands to not interfere with machinery automation. It is purely event-based node - it does not use node timers or ABMs.

    Configuration options:

    • destination number(s) of Machines or Controllers to send events to (optional; if not set, no messages are sent)
    • radius of square area to scan (1-16), area side is (2 * radius + 1) long
    • desired minimal number of crops/plants in the area (0 up to maximum depending on radius)

    Placement: place in the center of the field, up to 2 nodes above ground level.

    Status:

    • "error" - there are no crops in the area or they fall below defined minimum
    • "growing" - there are enough crops planted in the area but some of them are still growing
    • "ready" - there are enough crops on the field and all are ready for harvest

    Events (optional):

    • "on" - sent when device received "on" message, scanned area and result is "ready"

    Supported SaferLua functions:

    • $get_status(...)
    • $get_crops_status(...)

    Punch node to see current status and crop numbers.

  • Digilines Message Relay

    Chip that forwards communication between Digilines and Tubelib networks. It is a simple low-level device - it forwards messages as soon as they appear. It has no queue or flow control - it is up to sending and receiving systems to limit rate of communication. Message Relay accepts only Tubelib messages of type "msg", so its main role is to talk to SaferLua Controllers or Terminals. It does not forward any other Tubelib commands, like "on" or "off", so it cannot be used to control machinery directly. Chip must be configured before use. Configuration can be changed at any time. Chip does not use node timers.

    Configuration options:

    • Tubelib number(s) - space-separated list of Tubelib IDs (mandatory)
    • Digiline channel - name of Digiline channel device connects to (mandatory)

    Placement: connect to Digiline network via standard blue cable.

    Operational principles:

    • forwarding is disabled until Relay Chip is configured
    • configuration can be altered at any time with immediate effect
    • only one Digiline channel per chip is supported
    • only "msg" type of Tubelib communication is accepted; other packets are silently dropped
    • data sent on Digiline channel is converted to Tubelib "msg" type
    • Digiline messages forwarded to Tubelib targets have their source number set to Relay ID
    • Tubelib messages originating from devices not present on number list are rejected (security measure)
    • Tubelib messages that appear to come from device itself are rejected (anti-spoofing)
    • Relay Chip rejects configuration if its number appear on number list (loop prevention)
    • Digilines message sent to configured channel is forwarded to all listed Tubelib nodes
    • Relay does not queue messages
    • Relay does not provide flow rate control
    • Relay does not respond to any commands and status queries
    • only messages of type "string" are forwarded; Tubelib supports text messages only so no conversion is necessary; Digiline numbers and booleans are automatically converted to strings before being dispatched to Tubelib receivers; all other data types (arrays, functions etc) are silently dropped

    Supported SaferLua functions:

    • $send_msg(num, msg)
    • $get_msg()

    Supported Digilines functions:

    • digiline_send(channel, msg)

• Biogas Machines (biogasmachines)

  Expands Tubelib (and TechPack) with various machines that use Biogas either as a product or a power source. Machines are compatible with Techpack v2 and use Tubelib2 API.

  Available:

  • Water Freezer

    Freezing machine that converts water to ice using Biogas as coolant. Water can be supplied in buckets or (if pipeworks mod is installed) through pipes. One water bucket is converted to one ice cube, in case of pipe network there is no need for any vessels however fresh water should be provided via pipelines. Empty buckets are returned as secondary products so Freezer can be easily paired with Liquid Sampler and other Tubelib machinery.

  • Gasifier

    Machine to extract Biogas from compressed dry organic material, such as fossil fuels. Designed primarily to retrieve gas from Coal blocks (not lumps!), it allows to convert Straw blocks to Biogas units as well. Equipped with 'recipe hint bar' that shows processing ingredients, products and duration. Primary goal is to convert piles of Coal blocks to another burnable agent, better suited for use in modern machinery. More recipes can be added via simple API function (see source file).

  • Biogas Furnace

    Biogas-fuelled, Tubelib-compatible version of standard furnace. All cooking recipes apply. Notable differences are:

    • fuel is used only when cooking (Biogas is not wasted)
    • both input and output trays are larger allowing more items to be stored and processed
    • items that leave containers after cooking (for example farming:salt) do not block cooking tray; such vessels (buckets etc) are routed to output tray as well
    • uncookable items stay in input tray and are not routed anywhere
    • device tries its best to fill output tray and can choose input items to effectively utilize remaining space there

  • Biogas Jet Furnace

    Biogas Furnace that is 2 times faster than standard version in both item cooking time and Biogas consumption. While functionally identical to its predecessor, it supports stack pulling from output tray as well (can be paired with High Perf Pusher).

  • Compactor

    Heavy press with heating, compacting and cooling functions that can compress stone-like resources into very dense and hard materials, like obsidian. Default recipes include converting cobble and compressed gravel to obsidian, flint to obsidian shards and coal blocks to diamonds. Machine consumes Biogas for heating/compacting and Ice for rapid cooling. Custom recipes can be added via API function.

  • Biogas Torch

    Although not really a Tubelib-compatible machine, this item also helps to shift from Coal to Biogas as primary burning agent. Biogas Torch, a Biogas-powered eternal light source is a modern version of standard torch. Its goal is to replace coal torches as a basic, easy craftable and deployable source of light. Usage and light parameters are identical to original torch. Additionally, Biogas Torch becomes a heat source when placed, removing nearby snow and melting down ice to water (in a 3x3 cube around torch). There are many flavours of Biogas Torch, depending on metal used for handle, but these variations have only decorational purposes. Code and models are imported from Minetest Game default torch (torch.lua) - see source file for details.

  • Biogas Tank

    Dedicated storage for Biogas units. A convenient replacement for standard and Techpack chests when it comes to stockpiling Biogas.

    Gas tank comes in 3 sizes:

    • Small - 2 stacks
    • Medium - 32 stacks (standard Chest equivalent)
    • Large - 72 stacks (Tubelib HighPerf Chest equivalent)

    Features:

    • Biogas-only inventory
    • Tubelib I/O compatibility
    • real-time 3-level color visual fill indicator on device box
    • up-to-date capacity information in infotext (displayed when looking at the tank)
    • support for Tubelib stack pulling (can be paired with HighPerf Pusher)
    • not a machine, so no aging and no defects
    • support for standard SaferLua storage status query ("empty"/"loaded"/"full")
    • no node timer (capacity information and visual status updated only when node inventory is modified)

    Supported SaferLua functions:

    • $get_status(...)

• Miner Chest (minerchest)

  Miner Chest is a high capacity storage chest that automatically combines selected resources into respective blocks. Chest is compatible with Techpack (Tubelib2 framework) and Pipeworks (pneumatic tubes). It has capacity of 60 items. When used with Tubelib it supports stack pulling (can be paired with HighPerf Pusher).

  It automatically combines following items in its inventory:

  • all ingots types into respective blocks
  • all sand units into respective sandstones
  • coal lump -> coal block
  • mese crystal -> mese block
  • diamond crystal -> diamond block
  • wheat -> straw
  • clay lump -> clay block

  More allowed item combinations can be registered via API function.

  Chest supports only reversible combinations (example: metal blocks can be converted back to ingots) of popular minerals and resources (hence name Miner's Chest). Some free space is required to perform item reorganization as node may process only things that are already in its inventory. To increase efficiency, chest automatically piles up items into stacks, trying to free up as many slots as possible. When used as a source for Tubelib network, chest prioritizes items it sends out into tubes - so ingots and all other items that can be later combined into blocks are scheduled to be sent last. This approach increases chance that incoming elements will be successfully combined and passed further in compacted form.

  Features:

  • automatic crafting of configured items into blocks
  • automatic stack merging
  • Tubelib I/O compatibility
  • Pipeworks compatibility (accepts input from tubes)
  • support for Tubelib stack pulling (can be paired with HighPerf Pusher)
  • item prioritization for Tubelib pulling (stackable items go last)
  • no defects (not a machine)
  • support for standard SaferLua storage status (empty/loaded/full)
  • storage status - visual indicator and infotext
  • infobar in inventory window
  • no node timer (working only when inventory is updated)

  Supported SaferLua functions:

  • $get_status(...)

  Future plans - see TODO file.