0_4_11 Rewrite derived from levels mapgen

README.txt

@@ -1,6 +1,4 @@
-noise23 0.1.1 by paramat
+noise23 0.2.0 by paramat
-For latest stable Minetest back to 0.4.8
+For Minetest 0.4.11 and later
 Depends default
-Licenses: code WTFPL
+License: code WTFPL
-
-Enable fly, teleport to y = 7000 then fly up or down to find the surface.

init.lua

@@ -1,79 +1,57 @@
--- noise23 0.1.1 by paramat
--- For latest stable Minetest and back to 0.4.8
--- Depends default
--- License: code WTFPL
-
 -- Parameters
 
-local YMIN = 6000
+local YZERO = 0 -- Average world surface level
-local YMAX = 8000
+local TERSCA = 96 -- Vertical terrain scale
-local TERCEN = 7000 -- Terrain centre. Average terrain level
+local YWATER = 1
-local YWATER = 7000 -- Approximate water surface y, is rounded down to near base of chunk
+local STABLE = 2 -- Number of stone nodes required to support biome above
-local TERSCA = 128 -- Terrain scale in nodes, typical height of mountains
+local TSTONE = 0.03 -- Controls depth of stone below surface
-local TSTONE = 0.04 -- Density threshold for stone, depth of stone below surface
+local YSAND = 4 -- Y of beach top
-local STABLE = 2 -- Minimum number of stacked stone nodes in column required to support sand
+local TTUN = -0.4 -- Biome noise threshold for tundra
+local TDES = 0.4 -- Biome noise threshold for desert
 
--- 3D noise for terrain
+-- Noise parameters
+
+-- 3D noise
 
 local np_terrain = {
 	offset = 0,
 	scale = 1,
-	spread = {x=512, y=256, z=512}, -- squashed perlin noise, y spread is half
+	spread = {x=384, y=256, z=384},
 	seed = 5900033,
-	octaves = 6,
+	octaves = 5,
-	persist = 0.67
+	persist = 0.63,
+	lacunarity = 2.0,
+	--flags = ""
 }
 
--- 2D noise for biomes
+-- 2D noise
 
 local np_biome = {
 	offset = 0,
 	scale = 1,
-	spread = {x=512, y=512, z=512}, -- spread is still stated with xyz values
+	spread = {x=768, y=768, z=768},
 	seed = -188900,
-	octaves = 4,
+	octaves = 3,
-	persist = 0.5
+	persist = 0.4,
+	lacunarity = 2.0,
+	--flags = ""
 }
 
--- Stuff
+-- Set mapgen parameters
 
-noise23 = {}
+minetest.register_on_mapgen_init(function(mgparams)
+	minetest.set_mapgen_params({mgname="singlenode", flags="nolight"})
+end)
 
-ywater = (80 * math.floor((YWATER + 32) / 80)) - 32 + 15 -- sets water surface to 16 nodes above chunk base
+-- Initialize noise objects to nil
 
--- Nodes
+local nobj_terrain = nil
-
+local nobj_biome = nil
-minetest.register_node("noise23:flosand", {
-	description = "Turquoise Float Sand",
-	tiles = {"noise23_flosand.png"},
-	groups = {crumbly=3, falling_node=1},
-	sounds = default.node_sound_sand_defaults(),
-})
-
-minetest.register_node("noise23:stone", {
-	description = "N23 Stone",
-	tiles = {"default_stone.png"},
-	groups = {cracky=3},
-	drop = "default:stone",
-	sounds = default.node_sound_stone_defaults(),
-})
-
-minetest.register_node("noise23:desertstone", {
-	description = "N23 Desert Stone",
-	tiles = {"default_desert_stone.png"},
-	groups = {cracky=3},
-	drop = "default:desert_stone",
-	sounds = default.node_sound_stone_defaults(),
-})
 
 -- On generated function
 
 minetest.register_on_generated(function(minp, maxp, seed)
-	if minp.y < YMIN or maxp.y > YMAX then
+	local t0 = os.clock()
-		return
-	end
-
-	local t1 = os.clock()
 	local x1 = maxp.x
 	local y1 = maxp.y
 	local z1 = maxp.z
@@ -81,92 +59,135 @@ minetest.register_on_generated(function(minp, maxp, seed)
 	local y0 = minp.y
 	local z0 = minp.z
 	
-	print ("[noise23] chunk minp ("..x0.." "..y0.." "..z0..")")
-	
 	local vm, emin, emax = minetest.get_mapgen_object("voxelmanip")
 	local area = VoxelArea:new{MinEdge=emin, MaxEdge=emax}
 	local data = vm:get_data()
 	
-	local c_air = minetest.get_content_id("air")
+	local c_stone    = minetest.get_content_id("default:stone")
-	local c_n23stone = minetest.get_content_id("noise23:stone")
+	local c_sand     = minetest.get_content_id("default:sand")
-	local c_n23destone = minetest.get_content_id("noise23:desertstone")
+	local c_water    = minetest.get_content_id("default:water_source")
-	local c_sand = minetest.get_content_id("default:sand")
+	local c_lava     = minetest.get_content_id("default:lava_source")
-	local c_desand = minetest.get_content_id("default:desert_sand")
+	local c_grass    = minetest.get_content_id("default:dirt_with_grass")
-	local c_flosand = minetest.get_content_id("noise23:flosand")
+	local c_dirt     = minetest.get_content_id("default:dirt")
-	local c_water = minetest.get_content_id("default:water_source")
+	local c_desand   = minetest.get_content_id("default:desert_sand")
-	
+	local c_destone  = minetest.get_content_id("default:desert_stone")
+	local c_dirtsnow = minetest.get_content_id("default:dirt_with_snow")
+
 	local sidelen = x1 - x0 + 1
-	local chulens = {x=sidelen, y=sidelen, z=sidelen}
+	local ystridevm = sidelen + 32
-	local minposxyz = {x=x0, y=y0, z=z0}
+	--local zstridevm = ystride ^ 2
-	local minposxz = {x=x0, y=z0}
+	local chulens3d = {x=sidelen, y=sidelen+17, z=sidelen}
+	local chulens2d = {x=sidelen, y=sidelen, z=1}
+	local minpos3d = {x=x0, y=y0-16, z=z0}
+	local minpos2d = {x=x0, y=z0}
 	
-	local nvals_terrain = minetest.get_perlin_map(np_terrain, chulens):get3dMap_flat(minposxyz)
+	nobj_terrain = nobj_terrain or minetest.get_perlin_map(np_terrain, chulens3d)
-	local nvals_biome = minetest.get_perlin_map(np_biome, chulens):get2dMap_flat(minposxz)
+	nobj_biome = nobj_biome or minetest.get_perlin_map(np_biome, chulens2d)
 	
-	local nixyz = 1 -- 3D noise index
+	local nvals_terrain = nobj_terrain:get3dMap_flat(minpos3d)
-	local nixz = 1 -- 2D noise index
+	local nvals_biome = nobj_biome:get2dMap_flat(minpos2d)
+
+	local ni3d = 1
+	local ni2d = 1
 	local stable = {}
-	for z = z0, z1 do -- for each xy plane progressing northwards
+	local under = {}
+	for z = z0, z1 do
 		for x = x0, x1 do
 			local si = x - x0 + 1
-			local nodename = minetest.get_node({x=x,y=y0-1,z=z}).name
+			stable[si] = 0
-			if nodename == "air"
-			or nodename == "default:water_source" then
-				stable[si] = 0
-			else
-				stable[si] = STABLE
-			end
 		end
-		for y = y0, y1 do -- for each x row progressing upwards
+		for y = y0 - 16, y1 + 1 do
 			local vi = area:index(x0, y, z)
-			for x = x0, x1 do -- for each node do
+			for x = x0, x1 do
 				local si = x - x0 + 1
-				local grad = (TERCEN - y) / TERSCA
+				local viu = vi - ystridevm
-				local density = nvals_terrain[nixyz] + grad
+				local n_biome = nvals_biome[ni2d]
-				local n_biome = nvals_biome[nixz] -- biome noise for node
+
-				local biome = false -- set biome id to undefined
+				local n_terrain = nvals_terrain[ni3d]
-				if n_biome > 0.46 + math.random() * 0.04 then -- set biome id
+				local grad = (YZERO - y) / TERSCA
-					biome = 3
+				local density = n_terrain + grad
-				elseif n_biome < -0.5 + math.random() * 0.04 then
+
-					biome = 1
+				if y < y0 then
-				else
+					if density >= TSTONE then
-					biome = 2
+						stable[si] = stable[si] + 1
-				end
+					elseif density <= 0 then
-				if density >= TSTONE then
+						stable[si] = 0
-					if biome == 3 then
-						data[vi] = c_n23destone
-					else -- biomes 1 and 2
-						data[vi] = c_n23stone
 					end
-					stable[si] = stable[si] + 1
+					if y == y0 - 1 then
-				elseif density >= 0 and density < TSTONE and stable[si] >= 2 then
+						local nodid = data[vi]
-					if biome == 3 then
+						if nodid == c_stone
-						data[vi] = c_desand
+						or nodid == c_destone
-					elseif biome == 1 then
+						or nodid == c_sand
-						data[vi] = c_flosand
+						or nodid == c_desand
-					else -- biome = 2
+						or nodid == c_grass
-						data[vi] = c_sand
+						or nodid == c_dirt then
+							stable[si] = STABLE
+						end
+					end
+				elseif y >= y0 and y <= y1 then
+					if density >= TSTONE then
+						if n_biome > TDES then
+							data[vi] = c_destone
+						else
+							data[vi] = c_stone
+						end
+						stable[si] = stable[si] + 1
+						under[si] = 0
+					elseif density > 0 and density < TSTONE
+					and stable[si] >= STABLE then
+						if y <= YSAND then
+							data[vi] = c_sand
+							under[si] = 1 -- beach
+						elseif n_biome < TTUN then
+							data[vi] = c_dirt
+							under[si] = 4 -- tundra
+						elseif n_biome > TDES then
+							data[vi] = c_desand
+							under[si] = 3 -- desert
+						else
+							data[vi] = c_dirt
+							under[si] = 2 -- grassland
+						end
+					elseif y <= YWATER then
+						data[vi] = c_water
+						stable[si] = 0
+						under[si] = 0
+					else -- air, possibly just above surface
+						if under[si] == 2 then
+							data[viu] = c_grass
+						elseif under[si] == 4 then
+							data[viu] = c_dirtsnow
+						end
+						stable[si] = 0
+						under[si] = 0
+					end
+				elseif y == y1 + 1 then
+					if density <= 0 and y > YWATER then -- air, possibly just above surface
+						if under[si] == 2 then
+							data[viu] = c_grass
+						elseif under[si] == 4 then
+							data[viu] = c_dirtsnow
+						end
+						stable[si] = 0
+						under[si] = 0
 					end
-				elseif y <= ywater then
-					data[vi] = c_water
-					stable[si] = 0
-				else
-					data[vi] = c_air
-					stable[si] = 0
 				end
-				nixyz = nixyz + 1 -- increment 3D noise index
+
-				nixz = nixz + 1 -- increment 2D noise index
+				ni3d = ni3d + 1
+				ni2d = ni2d + 1
 				vi = vi + 1
 			end
-			nixz = nixz - 80 -- rewind 2D noise index by 80 nodes for next x row above
+			ni2d = ni2d - sidelen
 		end
-		nixz = nixz + 80 -- fast-forward 2D noise index by 80 nodes for next northward xy plane
+		ni2d = ni2d + sidelen
 	end
 	
 	vm:set_data(data)
-	vm:set_lighting({day=0, night=0})
 	vm:calc_lighting()
 	vm:write_to_map(data)
-	local chugent = math.ceil((os.clock() - t1) * 1000)
+	vm:update_liquids()
-	print ("[noise23] "..chugent.." ms")
+
-end)
+	local chugent = math.ceil((os.clock() - t0) * 1000)
+	print ("[noise23] "..chugent.." ms  minp ("..x0.." "..y0.." "..z0..")")
+end)
+