Note that this is a somewhat heavily modified custom version of librtmp.
I modified all the platform specific code that we were using for the
OBS1 to make it platform-independent.
I don't really like the code in this library, but it works well enough,
so I can't really fault anyone for it. It's just very.. unclean. Even
for a C library, quite unclean. Some parts are also a little less safe
than I'd prefer as well.
- Make it so that encoders can be assigned to outputs. If an encoder
is destroyed, it will automatically remove itself from that output.
I specifically didn't want to do reference counting because it leaves
too much potential for unchecked references and it just felt like it
would be more trouble than it's worth.
- Add a 'flags' value to the output definition structure. This lets
the output specify if it uses video/audio, and whether the output is
meant to be used with OBS encoders or not.
- Remove boilerplate code for outputs. This makes it easier to program
outputs. The boilerplate code involved before was mostly just
involving connecting to the audio/video data streams directly in each
output plugin.
Instead of doing that, simply add plugin callback functions for
receiving video/audio (either encoded or non-encoded, whichever it's
set to use), and then call obs_output_begin_data_capture and
obs_output_end_data_capture to automatically handle setting up
connections to raw or encoded video/audio streams for the plugin.
- Remove 'active' function from output callbacks, as it's no longer
really needed now that the libobs output context automatically knows
when the output is active or not.
- Make it so that an encoder cannot be destroyed until all data
connections to the encoder have been removed.
- Change the 'start' and 'stop' functions in the encoder interface to
just an 'initialize' callback, which initializes the encoder.
- Make it so that the encoder must be initialized first before the data
stream can be started. The reason why initialization was separated
from starting the encoder stream was because we need to be able to
check that the settings used with the encoder *can* be used first.
This problem was especially annoying if you had both video/audio
encoding. Before, you'd have to check the return value from
obs_encoder_start, and if that second encoder fails, then you
basically had to stop the first encoder again, making for
unnecessary boilerplate code whenever starting up two encoders.
- Add a properties window for sources so that you can now actually edit
the settings for sources. Also, display the source by itself in the
window (Note: not working on mac, and possibly not working on linux).
When changing the settings for a source, it will call
obs_source_update on that source when you have modified any values
automatically.
- Add a properties 'widget', eventually I want to turn this in to a
regular nice properties view like you'd see in the designer, but
right now it just uses a form layout in a QScrollArea with regular
controls to display the properties. It's clunky but works for the
time being.
- Make it so that swap chains and the main graphics subsystem will
automatically use at least one backbuffer if none was specified
- Fix bug where displays weren't added to the main display array
- Make it so that you can get the properties of a source via the actual
pointer of a source/encoder/output in addition to being able to look
up properties via identifier.
- When registering source types, check for required functions (wasn't
doing it before). getheight/getwidth should not be optional if it's
a video source as well.
- Add an RAII OBSObj wrapper to obs.hpp for non-reference-counted
libobs pointers
- Add an RAII OBSSignal wrapper to obs.hpp for libobs signals to
automatically disconnect them on destruction
- Move the "scale and center" calculation in window-basic-main.cpp to
its own function and in its own source file
- Add an 'update' callback to WASAPI audio sources
Also, rename atomic functions to be consistent with the rest of the
platform/threading functions, and move atomic functions to threading*
files rather than platform* files
- Implement OBS encoder interface. It was previously incomplete, but
now is reaching some level of completion, though probably should
still be considered preliminary.
I had originally implemented it so that encoders only have a 'reset'
function to reset their parameters, but I felt that having both a
'start' and 'stop' function would be useful.
Encoders are now assigned to a specific video/audio media output each
rather than implicitely assigned to the main obs video/audio
contexts. This allows separate encoder contexts that aren't
necessarily assigned to the main video/audio context (which is useful
for things such as recording specific sources). Will probably have
to do this for regular obs outputs as well.
When creating an encoder, you must now explicitely state whether that
encoder is an audio or video encoder.
Audio and video can optionally be automatically converted depending
on what the encoder specifies.
When something 'attaches' to an encoder, the first attachment starts
the encoder, and the encoder automatically attaches to the media
output context associated with it. Subsequent attachments won't have
the same effect, they will just start receiving the same encoder data
when the next keyframe plays (along with SEI if any). When detaching
from the encoder, the last detachment will fully stop the encoder and
detach the encoder from the media output context associated with the
encoder.
SEI must actually be exported separately; because new encoder
attachments may not always be at the beginning of the stream, the
first keyframe they get must have that SEI data in it. If the
encoder has SEI data, it needs only add one small function to simply
query that SEI data, and then that data will be handled automatically
by libobs for all subsequent encoder attachments.
- Implement x264 encoder plugin, move x264 files to separate plugin to
separate necessary dependencies.
- Change video/audio frame output structures to not use const
qualifiers to prevent issues with non-const function usage elsewhere.
This was an issue when writing the x264 encoder, as the x264 encoder
expects non-const frame data.
Change stagesurf_map to return a non-const data type to prevent this
as well.
- Change full range parameter of video scaler to be an enum rather than
boolean
Make sure it locks the write mutex before freeing the packets, and put
the detach code in the main thread loop rather than off in a separate
function for clarity
...The reason why audio didn't work was because I overwrote the bitrate
values.
As for semaphores, mac doesn't support unnamed semaphores without using
mach semaphores. So, I just implemented a semaphore wrapper for each
OS.
- Add some temporary streaming code using FFmpeg. FFmpeg itself is not
very ideal for streaming; lack of direct control of the sockets and
no framedrop handling means that FFmpeg is definitely not something
you want to use without wrapper code. I'd prefer writing my own
network framework in this particular case just because you give away
so much control of the network interface. Wasted an entire day
trying to go through FFmpeg issues.
There's just no way FFmpeg should be used for real streaming (at
least without being patched or submitting some sort of patch, but I'm
sort of feeling "meh" on that idea)
I had to end up writing multiple threads just to handle both
connecting and writing, because av_interleaved_write_frame blocks
every call, stalling the main encoder thread, and thus also stalling
draw signals.
- Add some temporary user interface for streaming settings. This is
just temporary for the time being. It's in the outputs section of
the basic-mode settings
- Make it so that dynamic arrays do not free all their data when the
size just happens to be reduced to 0. This prevents constant
reallocation when an array keeps going from 1 item to 0 items. Also,
it was bad to become dependent upon that functionality. You must now
always explicitly call "free" on it to ensure the data is free, and
that's how it should be. Implicit functionality can lead to
confusion and maintainability issues.
- Fix a bug where the initial audio data insertion would cause all
audio data to unintentionally clear (mixed up < and > operators, damn
human error)
- Fixed a potential interdependant lock scenario with channel mutex
locks and graphics mutex locks. The main video thread could lock the
graphics mutex and then while in the graphics mutex could lock the
channels mutex. Meanwhile in another thread, the channel mutex could
get locked, and then the graphics mutex would get locked, causing a
deadlock.
The best way to deal with this is to not let mutexes lock within
other mutexes, but sometimes it's difficult to avoid such as in the
main video thread.
- Audio devices should now be functional, and the devices in the audio
settings can now be changed as desired.
- Implement a means of obtaining default settings for an
input/output/encoder. obs_source_defaults for example will return
the default settings for a particular source type.
- Because C++ doesn't have designated initializers, use functions in
the WASAPI plugin to register the sources instead.
- Implement windows monitor capture (code is so much cleaner than in
OBS1). Will implement duplication capture later
- Add GDI texture support to d3d11 graphics library
- Fix precision issue with sleep timing, you have to call
timeBeginPeriod otherwise windows sleep will be totally erratic.
- Add WASAPI audio capture for windows, input and output
- Check for null pointer in os_dlopen
- Add exception-safe 'WinHandle' and 'CoTaskMemPtr' helper classes that
will automatically call CloseHandle on handles and call CoTaskMemFree
on certain types of memory returned from windows functions
- Changed the wide <-> MBS/UTF8 conversion functions so that you use
buffers (like these functions are *supposed* to behave), and changed
the ones that allocate to a different naming scheme to be safe
- Split input and output audio captures so that they're different
sources. This allows easier handling and enumeration of audio
devices without having to do some sort of string processing.
This way the user interface code can handle this a bit more easily,
and so that it doesn't confuse users either. This should be done for
all audio capture sources for all operating systems. You don't have
to duplicate any code, you just need to create input/output wrapper
functions to designate the audio as input or output before creation.
- Make it detect soundflower and wavtap devices as mac "output" devices
(even though they're actually input) for the mac output capture, and
make it so that users can select a default output capture and
automatically use soundflower or wavtap.
I'm not entirely happy about having to do this, but because mac is
designed this way, this is really the only way to handle it that
makes it easier for users and UI code to deal with.
Note that soundflower and wavtap are still also designated as input
devices, so will still show up in input device enumeration.
- Remove pragma messages because they were kind polluting the other
compiler messages and just getting in the way. In the future we can
just do a grep for TODO to find them.
- Redo list property again, this time using a safer internal array,
rather than requiring sketchy array inputs. Having functions handle
everything behind the scenes is much safer.
- Remove the reference counter debug log code, as it was included
unintentionally in a commit.
If the default device changes, set the reconnect interval to 200
milliseconds so it pretty much immediately tries to reinitialize the
audio with the newly selected default device. Otherwise, use 2000
millisecond intervals, and assume disconnection.
Also, reduced FFmpeg logging to just regular FFmpeg information rather
than everything FFmpeg logs.
LOG_ERROR should be used in places where though recoverable (or at least
something that can be handled safely), was unexpected, and may affect
the user/application.
LOG_WARNING should be used in places where it's not entirely unexpected,
is recoverable, and doesn't really affect the user/application.
I can't believe I wasn't doing this. This is why file output was
getting corrupted. Audio and video send in data from separate threads.
I should be embarassed for not having considered that.
Key lesson: Increase threading paranoia levels. Apparently my
threading paranoid levels are lackluster.
Actually, if initializing failed at all, it would never properly
uninitialize because the 'initialized' variable was never set until the
very end. Instead, set the "initialized" flag from the beginning to
ensure initialization.
- Add CoreAudio device input capture for mac audio capturing. The code
should cover just about everything for capturing mac input device
audio. Because of the way mac audio is designed, users may have no
choice but to obtain the open source soundflower software to capture
their mac's desktop audio. It may be necessary for us to distribute
it with the program as well.
- Hide event backend
- Use win32 events for windows
- Allow timed waits for events
- Fix a few warnings
FFmpeg test output wasn't make any attempt to sync data before. Should
be much more accurate now.
Also, added a restart message to audio settings if base audio settings
are changed.
Implement a few audio options in to the user interface as well as a few
inline audio functions in audio-io.h.
Make it so ffmpeg plugin automatically converts to the desired format.
Use regular interleaved float internally for audio instead of planar
float.
Add a scaler interface (defaults to swscale), and if a separate output
wants to use a different scale or format than the default output format,
allow a scaler instance to be created automatically for that output,
which will then receive the new scaled output.
If there are for example more than one audio outputs and they have
different sample rates or channels and such, this will allow automatic
conversion of that audio to the request formats/channels/rates (but only
if requested).
jp9000
fryshorts
Palana