Prefix with obs_ for the sake of consistency
Renamed enums:
- order_movement (now obs_order_movement)
Affected functions:
- obs_source_filter_setorder
- obs_sceneitem_setorder
The locale parameter was a mistake, because it puts extra needless
burden upon the module developer to have to handle this variable for
each and every single callback function. The parameter is being removed
in favor of a single centralized module callback function that
specifically updates locale information for a module only when needed.
Structures with anonymous unions would a warning when you do a brace
assignment on them.
Also fixed some unused parameters and removed some unused variables.
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
There are a ridiculous number of features related to scaling and
positioning due to requests by a number of people who complained that
they hated the way that OBS1 would always resize their sources when the
source's base size changed. There were also people who wanted more
control for how the resizing was handled, or the ability to completely
prevent resizing entirely if desired. So I made it so that you can
optionally use a 'bounds' system, which allows you to specify different
styles of controlling resizing.
If disabled, the source will always automatically resize and only the
base scale is applied. If enabled, you have a variety of different ways
to limit/control how it can resize within the bounds, or make it so it
can't resize at all. You can also control alignment within that
bounding box, so you can make it so that a source always aligns to a
side or corner of the box.
I also added an alignment value which changes how the source is oriented
relative to the position of the scene item. For example, setting
bottom-right alignment will make it so that the position of the item is
the bottom right corner of the source. When the source resizies, it
will resize leftward and upward in that case, which solves the problem
of how a source resizes relative to a desired position.
This saves scenes/sources from json on exit, and properly loads it back
up when starting up the program again, as well as the currently active
scene.
I had to add a 'load' and 'save' callback to the source interface
structure because I realizes that certain sources (such as scenes)
operate different with their saved data; scenes for example would have
to keep track of their settings information constantly, and that was
somewhat unacceptable to make it functional.
The optional 'load' callback will be called only after having loaded
setttings specifically from file/imported data, and the 'save' function
will be called only specifically when data actually needs to be saved.
I also had to adjust the obs_scene code so that it's a regular input
source type now, and I also modified it so that it doesn't have some
strange custom creation code anymore. The obs_scene_create function is
now simply just a wrapper for obs_source_create. You could even create
a scene with obs_source_create manually as well.
Add API for streaming services. The services API simplifies the
creation of custom service features and user interface.
Custom streaming services later on will be able to do things such as:
- Be able to use service-specific APIs via modules, allowing a more
direct means of communicating with the service and requesting or
setting service-specific information
- Get URL/stream key via other means of authentication such as OAuth,
or be able to build custom URLs for services that require that sort
of thing.
- Query information (such as viewer count, chat, follower
notifications, and other information)
- Set channel information (such as current game, current channel title,
activating commercials)
Also, I reduce some repeated code that was used for all libobs objects.
This includes the name of the object, the private data, settings, as
well as the signal and procedure handlers.
I also switched to using linked lists for the global object lists,
rather than using an array of pointers (you could say it was..
pointless.) ..Anyway, the linked list info is also stored in the shared
context data structure.
Also, rename atomic functions to be consistent with the rest of the
platform/threading functions, and move atomic functions to threading*
files rather than platform* files
Ensure that a source has a valid name. Duplicates aren't a big deal
internally, but sources without a name are probably something that
should be avoided. Made is so that if a source is programmatically
created without a name, it's assigned an index based name.
In the main basic-mode window, made it check to make sure the name was
valid as well.
- Split input and output audio captures so that they're different
sources. This allows easier handling and enumeration of audio
devices without having to do some sort of string processing.
This way the user interface code can handle this a bit more easily,
and so that it doesn't confuse users either. This should be done for
all audio capture sources for all operating systems. You don't have
to duplicate any code, you just need to create input/output wrapper
functions to designate the audio as input or output before creation.
- Make it detect soundflower and wavtap devices as mac "output" devices
(even though they're actually input) for the mac output capture, and
make it so that users can select a default output capture and
automatically use soundflower or wavtap.
I'm not entirely happy about having to do this, but because mac is
designed this way, this is really the only way to handle it that
makes it easier for users and UI code to deal with.
Note that soundflower and wavtap are still also designated as input
devices, so will still show up in input device enumeration.
- Remove pragma messages because they were kind polluting the other
compiler messages and just getting in the way. In the future we can
just do a grep for TODO to find them.
- Redo list property again, this time using a safer internal array,
rather than requiring sketchy array inputs. Having functions handle
everything behind the scenes is much safer.
- Remove the reference counter debug log code, as it was included
unintentionally in a commit.
- Signals and dynamic callbacks now require declarations to be made
before being used. What this does is allows us to get information
about the functions dynamically which can be relayed to the user and
plugins for future extended usage (this should have big implications
later for scripting in particular, hopefully).
- Reduced the number of types calldata uses from "everything I could
think of" to simply integer, float, bool, pointer/object, string.
Integer data is now stored as long long. Floats are now stored as
doubles (check em).
- Use a more consistent naming scheme for lexer error/warning macros.
- Fixed a rather nasty bug where switching to an existing scene would
cause it to increment sourceSceneRefs, which would mean that it would
never end up never properly removing the source when the user clicks
removed (stayed in limbo, obs_source_remove never got called)
LOG_ERROR should be used in places where though recoverable (or at least
something that can be handled safely), was unexpected, and may affect
the user/application.
LOG_WARNING should be used in places where it's not entirely unexpected,
is recoverable, and doesn't really affect the user/application.
the signals for scenes could have potentially conflicted with default
source signals. "remove" should be used for source removal, for
example. Changed the scene signals to "item-add" and "item-remove" for
its items.
- Remove obs_source::type because it became redundant now that the
type is always stored in the obs_source::info variable.
- Apply presentation volumes of 1.0 and 0.0 to sources when they
activate/deactivate, respectively. It also applies that presentation
volume to all sub-sources, with exception of transition sources.
Transition sources must apply presentation volume manually to their
sub-sources with the new transition functions below.
- Add a "transition_volume" variable to obs_source structure, and add
three functions for handling volume for transitions:
* obs_transition_begin_frame
* obs_source_set_transition_vol
* obs_transition_end_frame
Because the to/from targets of a transition source might both contain
some of the same sources, handling the transitioning of volumes for
that specific situation becomes an issue.
So for transitions, instead of modifying the presentation volumes
directly for both sets of sources, we do this:
- First, call obs_transition_begin_frame at the beginning of each
transition frame, which will reset transition volumes for all
sub-sources to 0. Presentation volumes remain unchanged.
- Call obs_source_set_transition_vol on each sub-source, which will
then add the volume to the transition volume for each source in
that source's tree. Presentation volumes still remain unchanged.
- Then you call obs_trandition_end_frame when complete, which will
then finally set the presentation volumes to the transition
volumes.
For example, let's say that there's one source that's within both the
"transitioning from" sources and "transition to" sources. It would
add both the fade in and fade out volumes to that source, and then
when the frame is complete, it would set the presentation volume to
the sum of those two values, rather than set the presentation volume
for that same source twice which would cause weird volume jittering
and also set the wrong values.
Now sources will be properly activated and deactivated when they are in
use or not in use.
Had to figure out a way to handle child sources, and children of
children, just ended up implementing simple functions that parents use
to signal adding/removal to help with hierarchial activation and
deactivation of child sources.
To prevent the source activate/deactivate callbacks from being called
more than once, added an activation reference counter. The first
increment will call the activate callback, and the last decrement will
call the deactivate callback.
Added "source-activate" and "source-deactivate" signals to the main obs
signal handler, and "activate" and "deactivate" to individual source
signal handlers.
Also, fixed the main window so it properly selects a source when the
current active scene has been changed.
There were a *lot* of warnings, managed to remove most of them.
Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after,
as -Wall -Wextra was overwriting flags that came before it.
The API used to be designed in such a way to where it would expect
exports for each individual source/output/encoder/etc. You would export
functions for each and it would automatically load those functions based
on a specific naming scheme from the module.
The idea behind this was that I wanted to limit the usage of structures
in the API so only functions could be used. It was an interesting idea
in theory, but this idea turned out to be flawed in a number of ways:
1.) Requiring exports to create sources/outputs/encoders/etc meant that
you could not create them by any other means, which meant that
things like faruton's .net plugin would become difficult.
2.) Export function declarations could not be checked, therefore if you
created a function with the wrong parameters and parameter types,
the compiler wouldn't know how to check for that.
3.) Required overly complex load functions in libobs just to handle it.
It makes much more sense to just have a load function that you call
manually. Complexity is the bane of all good programs.
4.) It required that you have functions of specific names, which looked
and felt somewhat unsightly.
So, to fix these issues, I replaced it with a more commonly used API
scheme, seen commonly in places like kernels and typical C libraries
with abstraction. You simply create a structure that contains the
callback definitions, and you pass it to a function to register that
definition (such as obs_register_source), which you call in the
obs_module_load of the module.
It will also automatically check the structure size and ensure that it
only loads the required values if the structure happened to add new
values in an API change.
The "main" source file for each module must include obs-module.h, and
must use OBS_DECLARE_MODULE() within that source file.
Also, started writing some doxygen documentation in to the main library
headers. Will add more detailed documentation as I go.
- Implemented better C++ classes for handling scenes/sources/items in
obs.hpp, allowing them to automatically increment and decrement the
references of each, as well as assign them to QVariants.
- Because QVariants are now using the C++ classes, remove the pointer
QVariant wrapper.
- Use the new C++ classes with the QVariant user data of list box items,
both for the sake of thread safety and to ensure that the data
referenced is not freed until removed. NOTE: still might need some
testing.
- Implemented a source-remove signal from libobs, and start using that
signal instead of the source-destroy signal for signalling item
removal.
Scene items previously were removed by calling obs_sceneitem_destroy,
but this proved to be a potential race condition where two different
threads could try to destroy the same scene item at the same time.
Instead of doing that, reference counting is now used on scene items,
and an explicit obs_sceneitem_remove function is used instead for item
removal, which sets a 'removed' variable to ensure it can only be called
exactly one time.
The previous commit used the scene as a parameter to check to see if
the scene item was still present within the scene before destroying, but
this was actually unnecessary because the fault was because the destroy
signal was being triggered *before* the scene's mutex locked, thus
causing a race condition. I changed the code so that it signals after
the lock instead of before, so the scene parameter should no longer be
necessary.
Fixes a deadlock when trying to remove a source from the GUI. The scene
item signal handlers would mark the source as removed which results in
the video thread also trying to run obs_sceneitem_destroy thereby
deadlocking the video thread (and the GUI thread)
- Add 'set_default' functions to obs-data.*. These functions ensure
that a paramter exists and that the parameter is of a specific type.
If not, it will create or overwrite the value with the default setting
instead.
These functions are meant to be explicitly called before using any of
the 'get' functions. The reason why it was designed this way is to
encourage defaults to be set in a single place/function.
For example, ideal usage is to create one function for your data,
"set_my_defaults(obs_data_t data)", set all the default values within
that function, and then call that function on create/update, that way
all defaults are centralized to a single place.
- Ensure that data passed to sources/encoders/outputs/etc is always
valid, and not a null value.
- While I'm remembering, fix a few defaults of the main program config
file data.
Add a fairly easy to use settings interface that can be passed to
plugins, and replaced the old character string system that was being
used before. The new data interface allows for an easier method of
getting/altering settings for plugins, and is built to be serializable
to/from JSON.
Also, removed another wxFormBuilder file that was no longer in use.
Scenes will now signal via their source when an item has been added
or removed from them.
"add" - Item added to the scene.
Parameters: "scene": Scene that the item was added to.
"item": Item that was added.
"remove" - Item removed from the scene.
Parameters: "scene": Scene that the item was removed from.
"item": Item that was removed.
