The graphics subsystem was not being freed here, for example if a
required effect failed to compile it would still successfully have the
graphics subsystem sans required effect. The graphics subsystem should
be completely shut down if required libobs effects fail to compile.
Due to a small error in the timestamp smoothing code the timestamp of
audio packages that were too early was always set to the next expected
timestamp, even if the difference was bigger than the smoothing threshold.
This would cause obs to simply append all audio data to the buffer even if
the real timestamp was way smaller than the next that was expected.
This should reduce corruption problems with for example the pulseaudio
plugin, which resends data under certain conditions.
As stated in the sysinfo manpage the totalram field in the sysinfo
structure is in mem_unit sizes since Linux 2.3.23. To get the actual
memory in the system the totalram value has to be multiplied with the
mem_unit size.
obs_source_update_properties should be called by sources when property
values change, e.g. a capture device source would use this when it
detects a new capture device (in case its properties contain a list of
available capture devices or similar)
This allows for easier comparison between two obs_data_t and it will make
const char *json1 = obs_data_get_json(data);
obs_data_t *data_ = obs_data_create_from_json(json1);
const char *json2 = obs_data_get_json(data_);
produce the same string in json1 and json2
This Fixes a minor flaw with the API where data had to always be mutable
to be usable by the API.
Functions that do not modify the fundamental underlying data of a
structure should be marked as constant, both for safety and to signify
that the parameter is input only and will not be modified by the
function using it.
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
This is not a com pointer; it should not release/close the handle when
an & operator is used, it should only return the handle value. Clearing
is only used on assignment.
This helps ensure that an asynchronous video source is played as close
to its framerate as possible, reduces the risk of duplication as
much as possible, and helps to ensure that playback is as smooth as
possible.
This prevents multiple needless calls to obs_source_get_frame and other
functions. If the texture has already been processed, then just render
it as-is in any subsequent calls to obs_source_video_render.
This is actually unnecessary now that there's a hard limit on the
maximum offset in which audio can be inserted.
This also assumes too much about the audio; it assumes audio is always
on, where as with some devices (such as the elgato) audio is not on
until the stream starts, and when the video has already incremented the
counter.
Audio that goes below the minimum expecting timing (current time -
buffering time) is automatically removed. However, delayed audio is not
removed regardless of its delay. This puts a hard cap of 6 seconds from
current time that the maximum delay audio can have. This will also
prevent the circular buffer from dynamically growing too large.
Doing timestamp smoothing in obs-source.c is good because timestamps can
typically operate on a different timebase, however, obs-source.c can
also change that time base dynamically (such as with async video and
unexpected timestamp jumps), so in order to ensure that audio is
seamless in the output as well, perform timestamp smoothing in
audio-io.c as well just as an extra precautionary measure.
If the audio didn't start at the 0 timestamp, it would misinterpret it
as a timestamp jump because obs_source::next_audio_ts_min is set to 0 on
creation. Timestamp starting values should be allowed to start at any
arbitrary value.
This makes it easier to do two things:
1.) Get the skipped frames count relative to each specific output
2.) Make it so that getting the 'current' log will always contain
information about skipped frames. Before, you'd have to force the
user to restart the program and get the last log, which was really
annoying when you just wanted to see how the encoders were
performing.
It would try to move data from the old pointer even if the pointer was
changed via realloc, which would cause it to copy data from freed
memory. Instead, just get the position of the data and call memmove to
move it up.
On release of obs_data, if the default/autoselect values pointed toward
a sub-object or a sub-array, it would look up the data for the regular
user value. (Palana must have forgot to change these functions around
when adding the default/autoselect functionality)
Multiplication of the matricies was being done in the wrong direction.
This caused source transformations to come out looking incorrect, for
example the linux-xshm source's cursor would not be drawn correctly or
in the right position if the source was moved/scaled/rotated. The
problem just turned out to be that the gs_matrix_* functions were
multiplying in the wrong direction. Reverse the direction of
multiplication, and the problem is solved.
Adds the following function:
------------------------------
obs_properties_add_font
This function creates a 'font' property to allow selection of a system
font. Implementation by the UI should treat the setting as an obs_data
sub-object with four sub-items:
- face: face name (string)
- style: style name (string)
- size: size (integer)
- flags: font flags (integer)
'flags' can be any combination of the following values:
- OBS_FONT_BOLD
- OBS_FONT_ITALIC
- OBS_FONT_UNDERLINE
- OBS_FONT_STRIKEOUT
API functions added:
-----------------------------------------------
obs_output_set_preferred_size
obs_output_get_width
obs_output_get_height
obs_encoder_set_scaled_size
obs_encoder_get_width
obs_encoder_get_height
These functions allow for easier means of setting a custom resolution on
an output or encoder.
If an output uses an encoder and you set the preferred width/height
using the output, then the output will attempt to set the scaled
width/height for the encoder it's currently using.
Outputs and encoders now should use these functions to determine the
width/height of the raw frame data instead of using the video-io
functions.
