Instead of having a "cbr" setting that turns CBR on and off, adds a
"rate_control" parameter that sets the rate control method, which can be
one of the following: CBR, ABR, VBR, CRF.
If the "cbr" setting is used, it will throw a deprecation warning to the
log.
Instead of using an option that turns CBR on/off, adds rate control
methods: VBR, CBR, CQP, Lossless.
This moves lossless from being a preset to being a rate control method.
When using per-encoder rescaling, QSV would overwrite the current
encoder scale value in the get_video_info callback with the base video
width/height instead of using the current encoder width/height.
(Also modifies obs-ffmpeg to handle empty frames on EOF)
Previously the demuxer could hit EOF before the decoder threads are
finished, resulting in truncated output. In the worse case scenario the
demuxer could read small files before ff_decoder_refresh even has a chance
to start the clocks, resulting in no output at all.
There was no error checking when sending headers/metadata, so what would
happen is that if a header/metadata send failed (meaning the socket was
disconnected), it would continue to act as if it was still connected,
and it would block and lock up on the next send/recv call.
In aa4e18740a I mistakenly thought that I could add the variables
back in and that it would automatically cull variables that aren't used,
but that wasn't the case -- the shader parser always checks to see
whether parameters were set, and if they're not, it'll fail. This fixes
an issue where the shader would try to access parameters that are no
longer needed and fail due to the shader parameter check.
YUV-based shader support has been removed (due to the fact that no
sources ever use YUV shading) so there's no reason to keep around the
YUV processing code.
Currently, multiple QSV encoders cannot be active at the same time
(otherwise it will crash). This is a temporary solution to prevent
crashes from occurring when more than one QSV encoder tries to start up
at the same time.
Additionally, in the future there should be a way for encoders to be
able to communicate with the front-end when an error such as this
occurs.
If the parent source of a scroll filter has a 0 width or 0 height, the
scroll filter would do a division by zero on the size_i variable, which
would then cause the offset variable to perpetually have a non-finite
value, thus preventing the scroll filter from rendering properly after
that due to the non-finite offset value being uploaded to the shader.
(Note: this commit also modifies the obs-filters and test-input modules)
Changes the obs_source_process_filter_begin return type so that it
returns true/false to indicate that filter processing should or should
not continue (for example if the filter is bypassed or if there's some
other sort of issue that causes the filtering to fail)
When using QSV is used on a windows 7 machine with a dedicated card, you
have to fake a monitor connection to your Intel graphics to be able to
use QSV. If you do not, the initialization will fail with an error.
The error for that situation is not handled properly, and a variable
will be used while null. Instead, the function should safely return
after that error is received.
Also, do not call ClearData in the destructor unless QSV has been
properly initialized (if m_pmfxENC is null).
The if statement erroneously ended with a ';', which means that the code
is always executed, but there's no reason to even have these if checks
in the first place as the functions themselves return safely with null
pointers.
When using a chain hook method (forward or reverse), it was unwisely
assumed that the previous hook in the chain would not overwrite new
hooks when it's called. When the game capture hook calls the previous
hook in the chain, certain other programs that hook (in this case,
rivatuner on-screen display) would overwrite the hook with older data
and erase the game capture hook, causing it to only capture the first
frame and then never capture again.
This patch ensures that the hook is always saved before calling the next
hook in the chain and then restored after the call returns. It also
preserves any new hooks that may be added on top of it at any point.
This option is an x264-specific feature that may generate additional
keyframes when a major visual change in the output is detected. This
functionality is undesirable for streaming because it can cause
keyframes to become inconsistent and unpredictable, which can negatively
affect viewer buffering.
This is to work around a Mesa issue that prevents copying
between RGB and RGBA textures. Other drivers seem to allow
this, even though it's technically not allowed by the GL
spec.
Closesjp9000/obs-studio#514
(Note: This commit also modified text-freetype2)
Prevents issues from being able to update files that may not be using
the current system encoding on windows.
Useful for two purposes:
1.) When many devices are hooked up to the system and used in separate
scenes, but only one device active at once is desired
2.) Allows users who are dependent on outputting audio to desktop to
disable that audio (via disabling that device) when the device isn't
being displayed
(Note: Also modified the obs-ffmpeg plugin module)
Allows the ability for frame data to pass 8-bit grayscale images (Y800
color format).
Closesjp9000/obs-studio#515
(Note: This commit also modified text-freetype2)
The implementation of get_modified_timestamp() did not check the return
value of stat(), so in case the check fails the values in the stats
structure can be any garbage on the stack and the value of
stats.st_mtime can change on every call. This can trigger a reload of
the image every second, even if the file was not actually modified.
Closesjp9000/obs-studio#520
(Note: This commit also modifies obs-filters and text-freetype2)
This simplifies writing of effects. DrawMatrix is no longer necessary
because there are no sources that require drawing with a color matrix
other than async sources, and async sources are automatically processed
and don't defer their initial render stage to filters.
Originally this on by default, but then was changed to being off by
default because it was thought that there were permission issues, but it
turned out that the permission issues were a separate bug, so it's safe
to have this be default to on again.
This is a fast/immediate solution to a possible bug with caching the DLL
versions for game capture hook addresses - may as well just reload game
capture hook addresses each time the program is run for the time being
just to be safe. Load time will increase a little for the time being
but it's worth it to prevent any issues with game capture.
When a source window was not available, a red background was shown
instead. This was undesirable, and expected behavior would be for the
background to be transparent, enabling what exists behind the source
to be shown.
These functions were mistakenly not marked as static. They are not used
outside of their compiled object module files, therefore there's no
reason for them not to be static.
Apple wants to get people to move over to their own crypto APIs instead
of using OpenSSL, so disable the warning in the files where OpenSSL is
used for the time being.
If the media source is set to restart on activation, it also shuts down
when not active. However, it would *always* start regardless of
active/inactive when the source is first created. It shouldn't do that,
it should start up only when it becomes active.
Certain types of sources (display captures, game captures, audio
device captures, video device captures) should not be duplicated. This
capability flag hints that the source prefers references over full
duplication.
Darkest dungeon uses an unusual technique for drawing its frames: a
fixed 1920x1080 frame buffer used in place of the backbuffer, which is
then stretched to fit the size of the screen (whether the screen is
bigger or smaller than the actual texture).
The custom frame would cause glReadBuffer to initially fail with an
error. When this happens, their custom frame buffer is in use, so all
that needs to be done is simply reset the capture and force the current
output size to 1920x1080 while that custom frame is in use.
They presumably did this in order to ensure the game looks the same at
any resolution. Instead of having to use power-of-two sprites and
mipmaps for every single game sprite and stretch/skew each of them
(which would risk the final output "not looking quite right" at
different resolutions), they simply use non-pow-2 sprites with no
mipmaps and render them all on to one texture of a fixed size and then
stretch that final output texture. That ensures that the actual
composite of the game still looks the same at any resolution, while
reducing texture memory by not requiring each sprite to use a
power-of-two texture and mipmaps.
Adds the option of making the media file restart when the source becomes
active (such as switching to a scene with it).
Due to lack of libff features to start/stop/pause/seek media files,
currently this just destroys the demuxer and recreates it. Ideally,
libff should have some functions to allow a more optimal means of doing
those things.
Reactors a bit of code related to starting up FFmpeg and makes it so the
initial view for the media source's properties displays the most
commonly desired settings.
Instead of the media source properties showing the URL mode by default
along with a whole bunch of properties that are confusing to most users,
starts on file mode and changes defaults to be a bit more sensible
related to file input.
Also, as a temporary measure for fixing color format issues (some video
files would display their color information incorrectly), forced format
conversion is now enabled by default, and has been moved to advanced
settings. Ideally, the actual bug causing color format issues in either
media-io or libff should be fixed at some point.
When browsing for a file, it would also just use *.* for the file
filter, which is a pain to use. This has been changed to use a
reasonable file filter related to common video/audio files so you don't
have to wade through non-media files just to select a media file. A
filter to show all files is still available as well.
Prevents it from loading the entire image in the graphics thread, and
allows for animated gifs in the filter (not that anyone would ever do
that. ..right?)
Fixes what is arguably the most annoying feature of the mask/blend
filter, the fact that the image always stretches to the entire source.
It now centers and preserves aspect ratio by default, with an option to
make it stretch and discard aspect ratio to make it operate as it did
before.
Images continually loading/unloading every time transitioning occurs
adds a lot of unnecessary transition lag. The user can always change
this value manually and/or use scene collections, so change the default
setting to make it not unload/reload by default feels a bit more safe.
This is probably not necessary but might fix an issue where errors pass
through to other parts of the program, possibly causing the crash on
exit related to the xcomposite capture.
Some games don't catch GL errors via glGetError, so there's a
possibility that an error will pass through to the capture calls,
causing a false failure.
The most simple solution is to just clear the error flag on each capture
call.
To first render the filter, the width/height values must be set, but
currently they're only set in the render function, which means that the
crop filter can never be rendered when the program first starts up.
This would cause the filter to fail to render at all under those
circumstances.
This patch moves the calculations from render to tick to ensure that
they're always called and the values are always set.
The virtual address table values for Reset/ResetEx can sometimes point
to functions that are in libraries outside of D3D8.dll and D3D9.dll, and
will cause a crash if used. Instead, just hook Reset/ResetEx when one
of the Present* functions are called.
Not calling recv when data is received will accumulate data in the
internal recveive buffer until it's full, in which case is will stop
acknowledging. This can lead to unjustified disconnections.
If there was an attempt to destroy the rtmp-stream output while it was
already connecting and stopping at the same time, it would try to join
with the stop thread rather than with the connect thread. The connect
thread would then continue past destruction.
Sometimes stopping a connection can lock up due to data that still
remains to be sent, and this would lock up the thread requesting the
stop (typically the UI thread). So instead of locking up the calling
thread, spawn a new thread specifically for stopping so the calling
thread can continue uninterrupted. If the user attempts to reconnect,
it will wait for the stop thread to complete in the connect thread
before attempting to connect.
API removed:
--------------------
gs_effect_t *obs_get_default_effect(void);
gs_effect_t *obs_get_default_rect_effect(void);
gs_effect_t *obs_get_opaque_effect(void);
gs_effect_t *obs_get_solid_effect(void);
gs_effect_t *obs_get_bicubic_effect(void);
gs_effect_t *obs_get_lanczos_effect(void);
gs_effect_t *obs_get_bilinear_lowres_effect(void);
API added:
--------------------
gs_effect_t *obs_get_base_effect(enum obs_base_effect effect);
Summary:
--------------------
Combines multiple near-identical functions into a single function with
an enum parameter.
jp9000
Gol-D-Ace
CallumHoward
Richard Stanway
Seung-Woo Kim
Aesen Vismea
Guillermo A. Amaral
hwdro
jpk
pantonvich
Christoph Hohmann
sorayuki
thekrzos
Charles Ray Shisler III
Radzaquiel
yogpstop
dodgepong
Lucian Poston
Palana
Richard Stanway