Original recording by Ryding.
http://freesound.org/people/Ryding/
Found by Anth0rx, edited by paramat.
Add and use 'default.node_sound_snow_defaults()' function.
Previous times were chosen using statistical maths, but reports suggested
this was too long.
I tested by timing an ABM acting on 100 nodes, with interval and chance equal
to the old sapling ABM.
50 at 4m59s.
99 at 24m58s.
100 at 26m58s.
So choose a grow time between 5 and 25 min for tree and bush saplings.
If 'can grow' is false at grow time the timer is reset to 5 min.
This keeps the filenames the same, but adds a new "inside" double texture
for the open chest.
Use regular drawtype for closed chest and delete the "cube.obj" model.
X-flip the right-side texture for the closed chest.
Revert the new 'default:game' inventory back to the old 'main' and use the
lbm to restore the contents of the chest.
Change the name of the conversion LBM to ensure it is run again on already
converted chests.
Adds a mesh model that appears when a chest is opened. The chest
stays visibly open as long as the player keeps it open. When the
player closes the formspec, the chest returns back to the closed
shape. While opening and closing, a sound plays.
A second person inspecting the chest will trigger a second sound
open. However, only after the last player closes the chest, does the
chest actually visually close and is the sound close played. This
keeps mesh updates to a minimum.
While it's possible that a server shutting down may cause chests
to remain open, this does not affect the chests' working matter,
and opening or closing them should fix them.
Old chests are converted to the new style by LBM. I previously
had them converted on open but this was unreliable, and LBMs
don't have that problem.
Open chests cannot be dug up. This prevents people from keeping
a chest open and digging it out as well, since closing a chest
would place a chest back (swap) at the spot. We could protect
against this, but it still messes up the client and causes a lot
of "missing node inventory" error messages otherwise. It's
unlikely but possible that a player lagging out causes a chest
to stay "open" and thus unremovable by digging, but there are
other ways of dealing with that - a server restart fixes that
issue.
If the lid of the chest is obstructed, the sounds continue to play,
but the lid isn't opened. Obstructed means that a node is present
above the chest lid, however, we ignore several node types like signs,
torches (not 3d) and wallmounted nodeboxes (typically signs) since
they don't pose any major obstruction in almost any case, and are
typically found above chests. Additionally, the selection box of the
opened chest does not include the lid, and so one can still interact
with e.g. a sign behind an open lid.
Due to the fact that chests now have 7+ textures, we can no longer
use materials (limit: 6) to texture the chest, and so there is now
a single UV mapped image that applies both to open and closed chests.
While this does mean texture pack makers need to create it, this
is extremely simple and consists of a simple cut'n'paste over the
template and should be really easy to do. Only one texture file is
now then used for both open and closed chests.
Use Calinou's textures from moreores mod.
Craft bronze from tin and copper instead of steel and copper.
Match ore density to the moreores mod but start ore at a depth of
y = -32 to be part of the depth progression of other ores.
Bush saplings grow in half the time of tree saplings.
Bushes do not need 'from sapling' schematic variants because only the
stem node is force-placed in the mapgen schematic, so only the sapling
is force-replaced.
Bush leaves drop saplings with a rarity that ensures at least 1 sapling
per bush on average.
Use the soil group more instead of checking for multiple node names.
Remove 'neighbors' from ABM.
Turn any flora to dry shrub if on a non-soil, except when on default:sand
to avoid dune grasses being replaced.
Search for "group:soil" when searching for a position for the new flora
node, instead of searching for multiple node names, however do not spread
flora onto desert sand, which is in the soil group.
Remove default:dirt_with_snow from the soil group as it would be frozen
soil. It can be dug and placed to turn it into dirt (consider this some
extra work needed to make it cultivatable).
Previously you could place junglegrass on dirt to convert that dirt to
dirt_with_grass, but this is unsuitable now that rainforest has a
surface of dirt_with_rainforest_litter.
Remove junglegrass from the 'grass' group.
Denser jungletree for darker rainforest:
Highest 'jungletree' nodes now prob 255.
Add a 5th lower branch layer.
Increase lower branch layer y-slice prob to 191.
Aspen:
Extend trunk upwards by 1 node to reduce leafdecay radius to 2.
Pine:
Make lower trunk 1 node longer so that lowest branches are more often
higher off the ground, also to make pines taller.
Appletree:
Make 2 opposite branches prob 255, the other 2 prob 127, to avoid
trees with 1 or 0 branches. Therefore also add random rotation.
Utilizes several new features allowing the description of an item to be changed using the `description` meta key. This also moves keys from using the old single-value itemstack metadata system to the new node-like metadata system.
This implements a node-timer based leafdecay mechanism, and exposes
an API to use it in mods.
The API is documented in game_api.txt.
`default.register_leafdecay(leafdecaydef)`
`leafdecaydef` is a table, with following members:
{
trunks = { "default:tree"}, -- nodes considered trunks
leaves = { "default:leaves", "default:apple"}, -- nodes considered leaves
radius = 3, -- activates leafdecay this far from the trunk
}
The algorithm will drop `leaves` items in the area if no `trunks` are found
in the `trunk_radius` sized area around the position of the leaf. If a node
listed in `leaves` has a group `leafdecay_drop > 0`, then the item is dropped,
otherwise the item is removed but not dropped.
The algorithm also implements a value `default.leafdecay_speed` (default
15) which can be modified to increase or decrease of the leaf decay. The
algorithm will vary the actual speed a bit to introduce randomness.
Leaf decay is randomized by 0.1 seconds to reduce the chance that
decay happens many times on the same second interval. This requires
nodetimer_interval to be set to values lower than 1.0 to have an
effect.
The leaves will decay between 2 and 10 seconds after digging the trunk,
and happen at non-integer second intervals.
-- The API was added by sofar.
Plantlike drawtype no longer applies 'visual scale' twice, so now we
use the actual scale factor desired.
Remove unnecessary 'visual_scale = 1.0' lines.
Light level 14 to be able to grow plants.
3 returned from crafting with 1 glass node, 3 mese crystals and 1
wood plank.
Seamlessly placable on appletree wood fence posts.
This code adds the key concept to minetest_game, and integrates it
with lockable nodes. Currently supported lockable items are the Steel
Door, the Steel Trapdoor, and the Locked Chest.
The goal of this modification is to introduce a fine-grained multi-
player permission system that is intuitive and usable without any
console or chat commands, and doesn't require extra privileges to
be granted or setup. Keys can also physically be conveyed to other
players, adding to gameplay and adding some personality that is
preferable to console commands or editing formspecs.
A skeleton key can be crafted with 1 gold ingot. Skeleton keys can
then be matched to a lockable node by right-clicking the skeleton
key on a lockable node, which changes the skeleton key to a "key".
Gold was chosen as it's currently a not-so very useful item, and
therefore it's likely that players have some, but aren't really
using it for any purpose.
This key can subsequently used by any player to open or access that
lockable node, including retrieving items from Locked Chests, or
putting items in them.
They key is programmed to fit only the particular locked node it is
programmed to. This is achieved by storing a secret value in both
key and locked node. If this secret value doesn't match, the key
will not open the locked node. This allows many keys to be created
for one chest or door, but a key will only fit one node ever. The
secrets are stored in node, and item meta for the key.
If a locked node is removed, all keys that opened it are no longer
valid. Even if a new door/chest is placed in exactly the same spot,
the old keys will no longer fit that node.
Keys can be smelted back in gold ingots if they are no longer useful.
The method of storing a secret in nodemeta and itemstackmeta is secure
as there is no way for the client to create new items on the server
with a particular secret metadata value. Even if you could possible
create such an itemstack on the client, the server does not ever read
itemstackmeta from a client package.
The patch adds an API that allows other nodes and nodes added by
mods to use the same keys as well. The method how to implement this
is described in game_api.txt. The mod should add 2 callbacks to it's
node definition. Example code is given.
Textures are from PixelBOX, thanks to Gambit.
This merges the current state of the well-maintained and tested
`torches` mod as I've maintained it for the last 6 months.
This started out as a thorough cleanup of 3D torches by blockmen,
where some of the initial code still remains.
The models were redone entirely from scratch and have been extensively
tested with dozens of animated textures converted with mcimport,
and look a lot better than the original 3D Torches mod.
The ceiling torch is retained and functional. The `wieldlight`
addition that the torches mod has was removed, since it relies
on wieldview to look decent. This can stay external mod code.
I've opted to move the torch nodes to a separate file. It's not
a lot of code but nodes.lua is already huge, and I wanted to
retain the copyright header and some of the readme.txt notes,
and this was the easiest way of doing it.
This code passes "default:torch" to nodes with on_rightclick,
fixing problems with itemframes. Essentially it has a more
elaborate item_place() routine to make sure we're not passing
the wall torch to nodes that may display it.
The ceiling torch is a separate model and not the same as the
floor model. That does mean that there are 3 models in this
mod.
paramat
ezhh
paramat
ForbiddenJ
DTA7
SmallJoker
danielmeek32
tenplus1
rubenwardy
SmallJoker
DS-Minetest
MrIbby
Vanessa Ezekowitz
cx384
Auke Kok
Diego Martínez
octacian
MarkuBu
Thomas--S