- configure: no change necessary
- byterun/config.h: make sure ARCH_INT64_TYPE and related macros
are always defined, for Coq and others to use.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14636 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
and maybe others rely on it
byterun/config.h: select "long long" in preference to "long" for "int64",
just because this is how it was done in earlier versions.
(Minimizing suprises.)
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14635 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
An ISO C99-compliant C compiler and standard library is now assumed.
(Plus special exceptions for MSVC.) In particular, emulation code for
64-bit integer arithmetic was removed, the C compiler must support a
64-bit integer type.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14607 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
14278
14277
14276
14176
14175
14173
14172
14171
14169
14168
14167
These changes need to mature on their own branch.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14329 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
-C doesn't work on at least openbsd's make so don't use it.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14173 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
This script was built from ocamlcomp.sh.in through sed and is called
instead of "ocamlc" (for instance).
It makes it possible to switch from "ocamlc" to "ocamlc.opt" without
changing anything in the Makefiles, only calling sed.
I couldn't cleanly make it handle both a compiler for the target and for
the build. Instead I'm replacing it and doing as much as possible
directly in the Makefiles.
I hoped it would reduce the number of shell invocations, which would
speed things up quite a lot on Windows but I still had to have at least
one since it's not possible to update a make variable from inside a make
rule: i.e. it's not possible to do X=a, build a.opt and update X to be
a.opt.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14168 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
This doesn't touch the build system in build/ since it's obsolete and
unmaintained as far as I know (I'll try to remove it in a further
commit).
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13943 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
This makes the variable names more coherent and is in preparation for
another patch that will allow disabling ocamldoc and ocamlbuild.
This changes the interface of the configuration somewhat but I don't
think anything outside of the ocaml tree reads the Makefile.config file
that gets installed in order to see whether the debugger and camlp4 have
been built. It also changes a .mli which might be problematic but I also
believe it is safe and we have time to see if there's a bad impact.
It also adds a configure switch to skip building ocamldebug.
While at it, it fixes a PR number in the Changes file.
build: prepend "with_" to camlp4/ocamldebug-{en,dis}abling variables.
This makes the variable names more coherent and is in preparation for
another patch that will allow disabling ocamldoc and ocamlbuild.
This changes the interface of the configuration somewhat but I don't
think anything outside of the ocaml tree reads the Makefile.config file
that gets installed in order to see whether the debugger and camlp4 have
been built. It also changes a .mli which might be problematic but I also
believe it is safe and we have time to see if there's a bad impact.
It also adds a configure switch to skip building ocamldebug.
While at it, it fixes a PR number in the Changes file.
build: prepend "with_" to camlp4/ocamldebug-{en,dis}abling variables.
This makes the variable names more coherent and is in preparation for
another patch that will allow disabling ocamldoc and ocamlbuild.
This changes the interface of the configuration somewhat but I don't
think anything outside of the ocaml tree reads the Makefile.config file
that gets installed in order to see whether the debugger and camlp4 have
been built. It also changes a .mli which might be problematic but I also
believe it is safe and we have time to see if there's a bad impact.
It also adds a configure switch to skip building ocamldebug.
While at it, it fixes a PR number in the Changes file.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13942 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(modified patch from Adrien Nader!)
Add also new comments for the new INSTALL flags.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13864 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
I tried to use "hasgot" to test it but proved too difficult since you
must #include <winsock2.h> to make link succeed (windows magic) which
then makes gcc complain about the prototype being wrong.
Since windows already needs a special case in order to add -lws2_32 and
since we know for sure it will be available, skip the hasgot test and
check $target directly.
configure: add a special case to test for BSD sockets for mingw.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13855 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(patch by Adrien Nader!)
While at it also re-add two spaces that were eaten.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13851 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(patch by Adrien Nader!)
The test tried to do something like:
case "$foo,$bar" in
*,*) echo 1 ;;
*) echo "compiler not working" ;;
esac
However the second case cannot match because of the first one.
Instead, check the return code of the command.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13844 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
This makes messages to the user more consistent.
Behaviours:
inf(): writes its arguments to stderr
wrn(): writes "[WARNING]" to stderr and then its arguments to stderr
err(): writes "[ERROR!]" to stderr, then its arguments to stderr, and
calls "exit 2"
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13841 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
Fails to compile alt-ergo without frame-pointers. No time to debug
before tonight, so I revert and will merge again after fixing the
problem.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13732 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
This option can be used to tell the native compiler that it should
update frame pointers, so that debuggers and profiling tools
(especially Linux perf) can use them. For now, it is only supported
by the Unix/amd64 port.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13730 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
Mac OS X ships with a really old version of as, which does not support
the CFI directives. LLVM itself provides an assembler that is certainly
way more up to date, but currently there's no dedicated frontend, so we
simply use clang in this case.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13226 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
Mark Shinwell
Gabriel Scherer
Xavier Leroy
Jacques Garrigue
Damien Doligez
Jérémie Dimino
Wojciech Meyer
Xavier Clerc
Fabrice Le Fessant
Pierre Weis
Benedikt Meurer