Mapgen: Combine generateBiomes, dustTopNodes, and generateCaves

This commit condenses the above methods into a single implementation used by
V7, V5, Flat, Fractal, and Valleys mapgens and introduces MapgenBasic.
master
kwolekr 2016-05-02 02:24:57 -04:00
parent 76f4856479
commit 87bc39dca7
12 changed files with 316 additions and 1161 deletions

View File

@ -39,6 +39,7 @@ with this program; if not, write to the Free Software Foundation, Inc.,
#include "util/numeric.h"
#include "filesys.h"
#include "log.h"
#include "cavegen.h"
FlagDesc flagdesc_mapgen[] = {
{"trees", MG_TREES},
@ -369,6 +370,241 @@ void Mapgen::spreadLight(v3s16 nmin, v3s16 nmax)
}
////
//// MapgenBasic
////
MapgenBasic::MapgenBasic(int mapgenid, MapgenParams *params, EmergeManager *emerge)
: Mapgen(mapgenid, params, emerge)
{
}
MgStoneType MapgenBasic::generateBiomes()
{
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
MgStoneType stone_type = STONE;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = NULL;
u16 depth_top = 0;
u16 base_filler = 0;
u16 depth_water_top = 0;
u32 vi = vm->m_area.index(x, node_max.Y, z);
// Check node at base of mapchunk above, either a node of a previously
// generated mapchunk or if not, a node of overgenerated base terrain.
content_t c_above = vm->m_data[vi + em.X].getContent();
bool air_above = c_above == CONTENT_AIR;
bool water_above = (c_above == c_water_source || c_above == c_river_water_source);
// If there is air or water above enable top/filler placement, otherwise force
// nplaced to stone level by setting a number exceeding any possible filler depth.
u16 nplaced = (air_above || water_above) ? 0 : U16_MAX;
for (s16 y = node_max.Y; y >= node_min.Y; y--) {
content_t c = vm->m_data[vi].getContent();
// Biome is recalculated each time an upper surface is detected while
// working down a column. The selected biome then remains in effect for
// all nodes below until the next surface and biome recalculation.
// Biome is recalculated:
// 1. At the surface of stone below air or water.
// 2. At the surface of water below air.
// 3. When stone or water is detected but biome has not yet been calculated.
if ((c == c_stone && (air_above || water_above || !biome))
|| ((c == c_water_source || c == c_river_water_source)
&& (air_above || !biome))) {
biome = biomegen->getBiomeAtIndex(index, y);
depth_top = biome->depth_top;
base_filler = MYMAX(depth_top
+ biome->depth_filler
+ noise_filler_depth->result[index], 0.f);
depth_water_top = biome->depth_water_top;
// Detect stone type for dungeons during every biome calculation.
// This is more efficient than detecting per-node and will not
// miss any desert stone or sandstone biomes.
if (biome->c_stone == c_desert_stone)
stone_type = DESERT_STONE;
else if (biome->c_stone == c_sandstone)
stone_type = SANDSTONE;
}
if (c == c_stone) {
content_t c_below = vm->m_data[vi - em.X].getContent();
// If the node below isn't solid, make this node stone, so that
// any top/filler nodes above are structurally supported.
// This is done by aborting the cycle of top/filler placement
// immediately by forcing nplaced to stone level.
if (c_below == CONTENT_AIR
|| c_below == c_water_source
|| c_below == c_river_water_source)
nplaced = U16_MAX;
if (nplaced < depth_top) {
vm->m_data[vi] = MapNode(biome->c_top);
nplaced++;
} else if (nplaced < base_filler) {
vm->m_data[vi] = MapNode(biome->c_filler);
nplaced++;
} else {
vm->m_data[vi] = MapNode(biome->c_stone);
}
air_above = false;
water_above = false;
} else if (c == c_water_source) {
vm->m_data[vi] = MapNode((y > (s32)(water_level - depth_water_top))
? biome->c_water_top : biome->c_water);
nplaced = 0; // Enable top/filler placement for next surface
air_above = false;
water_above = true;
} else if (c == c_river_water_source) {
vm->m_data[vi] = MapNode(biome->c_river_water);
nplaced = depth_top; // Enable filler placement for next surface
air_above = false;
water_above = true;
} else if (c == CONTENT_AIR) {
nplaced = 0; // Enable top/filler placement for next surface
air_above = true;
water_above = false;
} else { // Possible various nodes overgenerated from neighbouring mapchunks
nplaced = U16_MAX; // Disable top/filler placement
air_above = false;
water_above = false;
}
vm->m_area.add_y(em, vi, -1);
}
}
return stone_type;
}
void MapgenBasic::dustTopNodes()
{
if (node_max.Y < water_level)
return;
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index]);
if (biome->c_dust == CONTENT_IGNORE)
continue;
u32 vi = vm->m_area.index(x, full_node_max.Y, z);
content_t c_full_max = vm->m_data[vi].getContent();
s16 y_start;
if (c_full_max == CONTENT_AIR) {
y_start = full_node_max.Y - 1;
} else if (c_full_max == CONTENT_IGNORE) {
vi = vm->m_area.index(x, node_max.Y + 1, z);
content_t c_max = vm->m_data[vi].getContent();
if (c_max == CONTENT_AIR)
y_start = node_max.Y;
else
continue;
} else {
continue;
}
vi = vm->m_area.index(x, y_start, z);
for (s16 y = y_start; y >= node_min.Y - 1; y--) {
if (vm->m_data[vi].getContent() != CONTENT_AIR)
break;
vm->m_area.add_y(em, vi, -1);
}
content_t c = vm->m_data[vi].getContent();
if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE && c != biome->c_dust) {
vm->m_area.add_y(em, vi, 1);
vm->m_data[vi] = MapNode(biome->c_dust);
}
}
}
void MapgenBasic::generateCaves(s16 max_stone_y, s16 large_cave_depth)
{
if (max_stone_y < node_min.Y)
return;
noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
v3s16 em = vm->m_area.getExtent();
u32 index2d = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index2d++) {
bool column_is_open = false; // Is column open to overground
bool is_tunnel = false; // Is tunnel or tunnel floor
u32 vi = vm->m_area.index(x, node_max.Y, z);
u32 index3d = (z - node_min.Z) * zstride_1d + csize.Y * ystride +
(x - node_min.X);
// Biome of column
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index2d]);
// Don't excavate the overgenerated stone at node_max.Y + 1,
// this creates a 'roof' over the tunnel, preventing light in
// tunnels at mapchunk borders when generating mapchunks upwards.
// This 'roof' is removed when the mapchunk above is generated.
for (s16 y = node_max.Y; y >= node_min.Y - 1; y--,
index3d -= ystride,
vm->m_area.add_y(em, vi, -1)) {
content_t c = vm->m_data[vi].getContent();
if (c == CONTENT_AIR || c == biome->c_water_top ||
c == biome->c_water) {
column_is_open = true;
continue;
}
// Ground
float d1 = contour(noise_cave1->result[index3d]);
float d2 = contour(noise_cave2->result[index3d]);
if (d1 * d2 > cave_width && ndef->get(c).is_ground_content) {
// In tunnel and ground content, excavate
vm->m_data[vi] = MapNode(CONTENT_AIR);
is_tunnel = true;
} else {
// Not in tunnel or not ground content
if (is_tunnel && column_is_open &&
(c == biome->c_filler || c == biome->c_stone))
// Tunnel entrance floor
vm->m_data[vi] = MapNode(biome->c_top);
column_is_open = false;
is_tunnel = false;
}
}
}
if (node_max.Y > large_cave_depth)
return;
PseudoRandom ps(blockseed + 21343);
u32 bruises_count = ps.range(0, 2);
for (u32 i = 0; i < bruises_count; i++) {
CaveV5 cave(this, &ps); ////caves version varies ---- todo- fix this!
cave.makeCave(node_min, node_max, max_stone_y);
}
}
////
//// GenerateNotifier
////

View File

@ -46,6 +46,7 @@ extern FlagDesc flagdesc_gennotify[];
class Biome;
class BiomeGen;
struct BiomeParams;
class BiomeManager;
class EmergeManager;
class MapBlock;
class VoxelManipulator;
@ -137,6 +138,16 @@ struct MapgenParams {
void save(Settings &settings) const;
};
/*
Generic interface for map generators. All mapgens must inherit this class.
If a feature exposed by a public member pointer is not supported by a
certain mapgen, it must be set to NULL.
Apart from makeChunk, getGroundLevelAtPoint, and getSpawnLevelAtPoint, all
methods can be used by constructing a Mapgen base class and setting the
appropriate public members (e.g. vm, ndef, and so on).
*/
class Mapgen {
public:
int seed;
@ -189,6 +200,51 @@ private:
DISABLE_CLASS_COPY(Mapgen);
};
/*
MapgenBasic is a Mapgen implementation that handles basic functionality
the majority of conventional mapgens will probably want to use, but isn't
generic enough to be included as part of the base Mapgen class (such as
generating biome terrain over terrain node skeletons, generating caves,
dungeons, etc.)
Inherit MapgenBasic instead of Mapgen to add this basic functionality to
your mapgen without having to reimplement it. Feel free to override any of
these methods if you desire different or more advanced behavior.
Note that you must still create your own generateTerrain implementation when
inheriting MapgenBasic.
*/
class MapgenBasic : public Mapgen {
public:
EmergeManager *m_emerge;
BiomeManager *bmgr;
Noise *noise_filler_depth;
Noise *noise_cave1;
Noise *noise_cave2;
v3s16 node_min;
v3s16 node_max;
v3s16 full_node_min;
v3s16 full_node_max;
content_t c_stone;
content_t c_water_source;
content_t c_river_water_source;
content_t c_desert_stone;
content_t c_sandstone;
int ystride;
int zstride_1d;
float cave_width;
MapgenBasic(int mapgenid, MapgenParams *params, EmergeManager *emerge);
virtual MgStoneType generateBiomes();
virtual void dustTopNodes();
virtual void generateCaves(s16 max_stone_y, s16 large_cave_depth);
};
struct MapgenFactory {
virtual Mapgen *createMapgen(int mgid, MapgenParams *params,
EmergeManager *emerge) = 0;

View File

@ -50,7 +50,7 @@ FlagDesc flagdesc_mapgen_flat[] = {
MapgenFlat::MapgenFlat(int mapgenid, MapgenParams *params, EmergeManager *emerge)
: Mapgen(mapgenid, params, emerge)
: MapgenBasic(mapgenid, params, emerge)
{
this->m_emerge = emerge;
this->bmgr = emerge->biomemgr;
@ -248,7 +248,7 @@ void MapgenFlat::makeChunk(BlockMakeData *data)
MgStoneType stone_type = generateBiomes();
if (flags & MG_CAVES)
generateCaves(stone_surface_max_y);
generateCaves(stone_surface_max_y, large_cave_depth);
if ((flags & MG_DUNGEONS) && (stone_surface_max_y >= node_min.Y)) {
DungeonParams dp;
@ -381,220 +381,3 @@ s16 MapgenFlat::generateTerrain()
return stone_surface_max_y;
}
MgStoneType MapgenFlat::generateBiomes()
{
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
MgStoneType stone_type = STONE;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = NULL;
u16 depth_top = 0;
u16 base_filler = 0;
u16 depth_water_top = 0;
u32 vi = vm->m_area.index(x, node_max.Y, z);
// Check node at base of mapchunk above, either a node of a previously
// generated mapchunk or if not, a node of overgenerated base terrain.
content_t c_above = vm->m_data[vi + em.X].getContent();
bool air_above = c_above == CONTENT_AIR;
bool water_above = c_above == c_water_source;
// If there is air or water above enable top/filler placement, otherwise force
// nplaced to stone level by setting a number exceeding any possible filler depth.
u16 nplaced = (air_above || water_above) ? 0 : U16_MAX;
for (s16 y = node_max.Y; y >= node_min.Y; y--) {
content_t c = vm->m_data[vi].getContent();
// Biome is recalculated each time an upper surface is detected while
// working down a column. The selected biome then remains in effect for
// all nodes below until the next surface and biome recalculation.
// Biome is recalculated:
// 1. At the surface of stone below air or water.
// 2. At the surface of water below air.
// 3. When stone or water is detected but biome has not yet been calculated.
if ((c == c_stone && (air_above || water_above || !biome)) ||
(c == c_water_source && (air_above || !biome))) {
biome = biomegen->getBiomeAtIndex(index, y);
depth_top = biome->depth_top;
base_filler = MYMAX(depth_top + biome->depth_filler
+ noise_filler_depth->result[index], 0);
depth_water_top = biome->depth_water_top;
// Detect stone type for dungeons during every biome calculation.
// This is more efficient than detecting per-node and will not
// miss any desert stone or sandstone biomes.
if (biome->c_stone == c_desert_stone)
stone_type = DESERT_STONE;
else if (biome->c_stone == c_sandstone)
stone_type = SANDSTONE;
}
if (c == c_stone) {
content_t c_below = vm->m_data[vi - em.X].getContent();
// If the node below isn't solid, make this node stone, so that
// any top/filler nodes above are structurally supported.
// This is done by aborting the cycle of top/filler placement
// immediately by forcing nplaced to stone level.
if (c_below == CONTENT_AIR || c_below == c_water_source)
nplaced = U16_MAX;
if (nplaced < depth_top) {
vm->m_data[vi] = MapNode(biome->c_top);
nplaced++;
} else if (nplaced < base_filler) {
vm->m_data[vi] = MapNode(biome->c_filler);
nplaced++;
} else {
vm->m_data[vi] = MapNode(biome->c_stone);
}
air_above = false;
water_above = false;
} else if (c == c_water_source) {
vm->m_data[vi] = MapNode((y > (s32)(water_level - depth_water_top)) ?
biome->c_water_top : biome->c_water);
nplaced = 0; // Enable top/filler placement for next surface
air_above = false;
water_above = true;
} else if (c == CONTENT_AIR) {
nplaced = 0; // Enable top/filler placement for next surface
air_above = true;
water_above = false;
} else { // Possible various nodes overgenerated from neighbouring mapchunks
nplaced = U16_MAX; // Disable top/filler placement
air_above = false;
water_above = false;
}
vm->m_area.add_y(em, vi, -1);
}
}
return stone_type;
}
void MapgenFlat::dustTopNodes()
{
if (node_max.Y < water_level)
return;
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index]);
if (biome->c_dust == CONTENT_IGNORE)
continue;
u32 vi = vm->m_area.index(x, full_node_max.Y, z);
content_t c_full_max = vm->m_data[vi].getContent();
s16 y_start;
if (c_full_max == CONTENT_AIR) {
y_start = full_node_max.Y - 1;
} else if (c_full_max == CONTENT_IGNORE) {
vi = vm->m_area.index(x, node_max.Y + 1, z);
content_t c_max = vm->m_data[vi].getContent();
if (c_max == CONTENT_AIR)
y_start = node_max.Y;
else
continue;
} else {
continue;
}
vi = vm->m_area.index(x, y_start, z);
for (s16 y = y_start; y >= node_min.Y - 1; y--) {
if (vm->m_data[vi].getContent() != CONTENT_AIR)
break;
vm->m_area.add_y(em, vi, -1);
}
content_t c = vm->m_data[vi].getContent();
if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE && c != biome->c_dust) {
vm->m_area.add_y(em, vi, 1);
vm->m_data[vi] = MapNode(biome->c_dust);
}
}
}
void MapgenFlat::generateCaves(s16 max_stone_y)
{
if (max_stone_y < node_min.Y)
return;
noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
v3s16 em = vm->m_area.getExtent();
u32 index2d = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index2d++) {
bool column_is_open = false; // Is column open to overground
bool is_tunnel = false; // Is tunnel or tunnel floor
u32 vi = vm->m_area.index(x, node_max.Y, z);
u32 index3d = (z - node_min.Z) * zstride_1d + csize.Y * ystride +
(x - node_min.X);
// Biome of column
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index2d]);
// Don't excavate the overgenerated stone at node_max.Y + 1,
// this creates a 'roof' over the tunnel, preventing light in
// tunnels at mapchunk borders when generating mapchunks upwards.
// This 'roof' is removed when the mapchunk above is generated.
for (s16 y = node_max.Y; y >= node_min.Y - 1; y--,
index3d -= ystride,
vm->m_area.add_y(em, vi, -1)) {
content_t c = vm->m_data[vi].getContent();
if (c == CONTENT_AIR || c == biome->c_water_top ||
c == biome->c_water) {
column_is_open = true;
continue;
}
// Ground
float d1 = contour(noise_cave1->result[index3d]);
float d2 = contour(noise_cave2->result[index3d]);
if (d1 * d2 > cave_width && ndef->get(c).is_ground_content) {
// In tunnel and ground content, excavate
vm->m_data[vi] = MapNode(CONTENT_AIR);
is_tunnel = true;
} else {
// Not in tunnel or not ground content
if (is_tunnel && column_is_open &&
(c == biome->c_filler || c == biome->c_stone))
// Tunnel entrance floor
vm->m_data[vi] = MapNode(biome->c_top);
column_is_open = false;
is_tunnel = false;
}
}
}
if (node_max.Y > large_cave_depth)
return;
PseudoRandom ps(blockseed + 21343);
u32 bruises_count = ps.range(0, 2);
for (u32 i = 0; i < bruises_count; i++) {
CaveV5 cave(this, &ps);
cave.makeCave(node_min, node_max, max_stone_y);
}
}

View File

@ -53,43 +53,19 @@ struct MapgenFlatParams : public MapgenSpecificParams {
void writeParams(Settings *settings) const;
};
class MapgenFlat : public Mapgen {
class MapgenFlat : public MapgenBasic {
public:
EmergeManager *m_emerge;
BiomeManager *bmgr;
int ystride;
int zstride_1d;
v3s16 node_min;
v3s16 node_max;
v3s16 full_node_min;
v3s16 full_node_max;
u32 spflags;
s16 ground_level;
s16 large_cave_depth;
float cave_width;
float lake_threshold;
float lake_steepness;
float hill_threshold;
float hill_steepness;
Noise *noise_terrain;
Noise *noise_filler_depth;
Noise *noise_cave1;
Noise *noise_cave2;
Noise *noise_heat;
Noise *noise_humidity;
Noise *noise_heat_blend;
Noise *noise_humidity_blend;
content_t c_stone;
content_t c_water_source;
content_t c_lava_source;
content_t c_desert_stone;
content_t c_ice;
content_t c_sandstone;
content_t c_cobble;
content_t c_stair_cobble;
@ -104,9 +80,6 @@ public:
int getSpawnLevelAtPoint(v2s16 p);
void calculateNoise();
s16 generateTerrain();
MgStoneType generateBiomes();
void dustTopNodes();
void generateCaves(s16 max_stone_y);
};
struct MapgenFactoryFlat : public MapgenFactory {

View File

@ -48,7 +48,7 @@ FlagDesc flagdesc_mapgen_fractal[] = {
MapgenFractal::MapgenFractal(int mapgenid, MapgenParams *params, EmergeManager *emerge)
: Mapgen(mapgenid, params, emerge)
: MapgenBasic(mapgenid, params, emerge)
{
this->m_emerge = emerge;
this->bmgr = emerge->biomemgr;
@ -264,7 +264,7 @@ void MapgenFractal::makeChunk(BlockMakeData *data)
MgStoneType stone_type = generateBiomes();
if (flags & MG_CAVES)
generateCaves(stone_surface_max_y);
generateCaves(stone_surface_max_y, MGFRACTAL_LARGE_CAVE_DEPTH);
if ((flags & MG_DUNGEONS) && (stone_surface_max_y >= node_min.Y)) {
DungeonParams dp;
@ -505,220 +505,3 @@ s16 MapgenFractal::generateTerrain()
return stone_surface_max_y;
}
MgStoneType MapgenFractal::generateBiomes()
{
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
MgStoneType stone_type = STONE;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = NULL;
u16 depth_top = 0;
u16 base_filler = 0;
u16 depth_water_top = 0;
u32 vi = vm->m_area.index(x, node_max.Y, z);
// Check node at base of mapchunk above, either a node of a previously
// generated mapchunk or if not, a node of overgenerated base terrain.
content_t c_above = vm->m_data[vi + em.X].getContent();
bool air_above = c_above == CONTENT_AIR;
bool water_above = c_above == c_water_source;
// If there is air or water above enable top/filler placement, otherwise force
// nplaced to stone level by setting a number exceeding any possible filler depth.
u16 nplaced = (air_above || water_above) ? 0 : U16_MAX;
for (s16 y = node_max.Y; y >= node_min.Y; y--) {
content_t c = vm->m_data[vi].getContent();
// Biome is recalculated each time an upper surface is detected while
// working down a column. The selected biome then remains in effect for
// all nodes below until the next surface and biome recalculation.
// Biome is recalculated:
// 1. At the surface of stone below air or water.
// 2. At the surface of water below air.
// 3. When stone or water is detected but biome has not yet been calculated.
if ((c == c_stone && (air_above || water_above || !biome)) ||
(c == c_water_source && (air_above || !biome))) {
biome = biomegen->getBiomeAtIndex(index, y);
depth_top = biome->depth_top;
base_filler = MYMAX(depth_top + biome->depth_filler
+ noise_filler_depth->result[index], 0);
depth_water_top = biome->depth_water_top;
// Detect stone type for dungeons during every biome calculation.
// This is more efficient than detecting per-node and will not
// miss any desert stone or sandstone biomes.
if (biome->c_stone == c_desert_stone)
stone_type = DESERT_STONE;
else if (biome->c_stone == c_sandstone)
stone_type = SANDSTONE;
}
if (c == c_stone) {
content_t c_below = vm->m_data[vi - em.X].getContent();
// If the node below isn't solid, make this node stone, so that
// any top/filler nodes above are structurally supported.
// This is done by aborting the cycle of top/filler placement
// immediately by forcing nplaced to stone level.
if (c_below == CONTENT_AIR || c_below == c_water_source)
nplaced = U16_MAX;
if (nplaced < depth_top) {
vm->m_data[vi] = MapNode(biome->c_top);
nplaced++;
} else if (nplaced < base_filler) {
vm->m_data[vi] = MapNode(biome->c_filler);
nplaced++;
} else {
vm->m_data[vi] = MapNode(biome->c_stone);
}
air_above = false;
water_above = false;
} else if (c == c_water_source) {
vm->m_data[vi] = MapNode((y > (s32)(water_level - depth_water_top)) ?
biome->c_water_top : biome->c_water);
nplaced = 0; // Enable top/filler placement for next surface
air_above = false;
water_above = true;
} else if (c == CONTENT_AIR) {
nplaced = 0; // Enable top/filler placement for next surface
air_above = true;
water_above = false;
} else { // Possible various nodes overgenerated from neighbouring mapchunks
nplaced = U16_MAX; // Disable top/filler placement
air_above = false;
water_above = false;
}
vm->m_area.add_y(em, vi, -1);
}
}
return stone_type;
}
void MapgenFractal::dustTopNodes()
{
if (node_max.Y < water_level)
return;
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index]);
if (biome->c_dust == CONTENT_IGNORE)
continue;
u32 vi = vm->m_area.index(x, full_node_max.Y, z);
content_t c_full_max = vm->m_data[vi].getContent();
s16 y_start;
if (c_full_max == CONTENT_AIR) {
y_start = full_node_max.Y - 1;
} else if (c_full_max == CONTENT_IGNORE) {
vi = vm->m_area.index(x, node_max.Y + 1, z);
content_t c_max = vm->m_data[vi].getContent();
if (c_max == CONTENT_AIR)
y_start = node_max.Y;
else
continue;
} else {
continue;
}
vi = vm->m_area.index(x, y_start, z);
for (s16 y = y_start; y >= node_min.Y - 1; y--) {
if (vm->m_data[vi].getContent() != CONTENT_AIR)
break;
vm->m_area.add_y(em, vi, -1);
}
content_t c = vm->m_data[vi].getContent();
if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE && c != biome->c_dust) {
vm->m_area.add_y(em, vi, 1);
vm->m_data[vi] = MapNode(biome->c_dust);
}
}
}
void MapgenFractal::generateCaves(s16 max_stone_y)
{
if (max_stone_y < node_min.Y)
return;
noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
v3s16 em = vm->m_area.getExtent();
u32 index2d = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index2d++) {
bool column_is_open = false; // Is column open to overground
bool is_tunnel = false; // Is tunnel or tunnel floor
u32 vi = vm->m_area.index(x, node_max.Y, z);
u32 index3d = (z - node_min.Z) * zstride_1d + csize.Y * ystride +
(x - node_min.X);
// Biome of column
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index2d]);
// Don't excavate the overgenerated stone at node_max.Y + 1,
// this creates a 'roof' over the tunnel, preventing light in
// tunnels at mapchunk borders when generating mapchunks upwards.
// This 'roof' is removed when the mapchunk above is generated.
for (s16 y = node_max.Y; y >= node_min.Y - 1; y--,
index3d -= ystride,
vm->m_area.add_y(em, vi, -1)) {
content_t c = vm->m_data[vi].getContent();
if (c == CONTENT_AIR || c == biome->c_water_top ||
c == biome->c_water) {
column_is_open = true;
continue;
}
// Ground
float d1 = contour(noise_cave1->result[index3d]);
float d2 = contour(noise_cave2->result[index3d]);
if (d1 * d2 > cave_width && ndef->get(c).is_ground_content) {
// In tunnel and ground content, excavate
vm->m_data[vi] = MapNode(CONTENT_AIR);
is_tunnel = true;
} else {
// Not in tunnel or not ground content
if (is_tunnel && column_is_open &&
(c == biome->c_filler || c == biome->c_stone))
// Tunnel entrance floor
vm->m_data[vi] = MapNode(biome->c_top);
column_is_open = false;
is_tunnel = false;
}
}
}
if (node_max.Y > MGFRACTAL_LARGE_CAVE_DEPTH)
return;
PseudoRandom ps(blockseed + 21343);
u32 bruises_count = ps.range(0, 2);
for (u32 i = 0; i < bruises_count; i++) {
CaveV5 cave(this, &ps);
cave.makeCave(node_min, node_max, max_stone_y);
}
}

View File

@ -57,23 +57,12 @@ struct MapgenFractalParams : public MapgenSpecificParams {
void writeParams(Settings *settings) const;
};
class MapgenFractal : public Mapgen {
class MapgenFractal : public MapgenBasic {
public:
EmergeManager *m_emerge;
BiomeManager *bmgr;
int ystride;
int zstride_1d;
u16 formula;
bool julia;
v3s16 node_min;
v3s16 node_max;
v3s16 full_node_min;
v3s16 full_node_max;
u32 spflags;
float cave_width;
u16 fractal;
u16 iterations;
v3f scale;
@ -84,16 +73,9 @@ public:
float julia_z;
float julia_w;
Noise *noise_seabed;
Noise *noise_filler_depth;
Noise *noise_cave1;
Noise *noise_cave2;
content_t c_stone;
content_t c_water_source;
content_t c_lava_source;
content_t c_desert_stone;
content_t c_ice;
content_t c_sandstone;
content_t c_cobble;
content_t c_stair_cobble;
@ -109,9 +91,6 @@ public:
void calculateNoise();
bool getFractalAtPoint(s16 x, s16 y, s16 z);
s16 generateTerrain();
MgStoneType generateBiomes();
void dustTopNodes();
void generateCaves(s16 max_stone_y);
};
struct MapgenFactoryFractal : public MapgenFactory {

View File

@ -46,7 +46,7 @@ FlagDesc flagdesc_mapgen_v5[] = {
MapgenV5::MapgenV5(int mapgenid, MapgenParams *params, EmergeManager *emerge)
: Mapgen(mapgenid, params, emerge)
: MapgenBasic(mapgenid, params, emerge)
{
this->m_emerge = emerge;
this->bmgr = emerge->biomemgr;
@ -245,7 +245,7 @@ void MapgenV5::makeChunk(BlockMakeData *data)
// Generate caves
if ((flags & MG_CAVES) && (stone_surface_max_y >= node_min.Y))
generateCaves(stone_surface_max_y);
generateCaves(stone_surface_max_y, MGV5_LARGE_CAVE_DEPTH);
// Generate dungeons and desert temples
if ((flags & MG_DUNGEONS) && (stone_surface_max_y >= node_min.Y)) {
@ -391,220 +391,3 @@ int MapgenV5::generateBaseTerrain()
return stone_surface_max_y;
}
MgStoneType MapgenV5::generateBiomes()
{
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
MgStoneType stone_type = STONE;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = NULL;
u16 depth_top = 0;
u16 base_filler = 0;
u16 depth_water_top = 0;
u32 vi = vm->m_area.index(x, node_max.Y, z);
// Check node at base of mapchunk above, either a node of a previously
// generated mapchunk or if not, a node of overgenerated base terrain.
content_t c_above = vm->m_data[vi + em.X].getContent();
bool air_above = c_above == CONTENT_AIR;
bool water_above = c_above == c_water_source;
// If there is air or water above enable top/filler placement, otherwise force
// nplaced to stone level by setting a number exceeding any possible filler depth.
u16 nplaced = (air_above || water_above) ? 0 : U16_MAX;
for (s16 y = node_max.Y; y >= node_min.Y; y--) {
content_t c = vm->m_data[vi].getContent();
// Biome is recalculated each time an upper surface is detected while
// working down a column. The selected biome then remains in effect for
// all nodes below until the next surface and biome recalculation.
// Biome is recalculated:
// 1. At the surface of stone below air or water.
// 2. At the surface of water below air.
// 3. When stone or water is detected but biome has not yet been calculated.
if ((c == c_stone && (air_above || water_above || !biome)) ||
(c == c_water_source && (air_above || !biome))) {
biome = biomegen->getBiomeAtIndex(index, y);
depth_top = biome->depth_top;
base_filler = MYMAX(depth_top + biome->depth_filler
+ noise_filler_depth->result[index], 0);
depth_water_top = biome->depth_water_top;
// Detect stone type for dungeons during every biome calculation.
// This is more efficient than detecting per-node and will not
// miss any desert stone or sandstone biomes.
if (biome->c_stone == c_desert_stone)
stone_type = DESERT_STONE;
else if (biome->c_stone == c_sandstone)
stone_type = SANDSTONE;
}
if (c == c_stone) {
content_t c_below = vm->m_data[vi - em.X].getContent();
// If the node below isn't solid, make this node stone, so that
// any top/filler nodes above are structurally supported.
// This is done by aborting the cycle of top/filler placement
// immediately by forcing nplaced to stone level.
if (c_below == CONTENT_AIR || c_below == c_water_source)
nplaced = U16_MAX;
if (nplaced < depth_top) {
vm->m_data[vi] = MapNode(biome->c_top);
nplaced++;
} else if (nplaced < base_filler) {
vm->m_data[vi] = MapNode(biome->c_filler);
nplaced++;
} else {
vm->m_data[vi] = MapNode(biome->c_stone);
}
air_above = false;
water_above = false;
} else if (c == c_water_source) {
vm->m_data[vi] = MapNode((y > (s32)(water_level - depth_water_top)) ?
biome->c_water_top : biome->c_water);
nplaced = 0; // Enable top/filler placement for next surface
air_above = false;
water_above = true;
} else if (c == CONTENT_AIR) {
nplaced = 0; // Enable top/filler placement for next surface
air_above = true;
water_above = false;
} else { // Possible various nodes overgenerated from neighbouring mapchunks
nplaced = U16_MAX; // Disable top/filler placement
air_above = false;
water_above = false;
}
vm->m_area.add_y(em, vi, -1);
}
}
return stone_type;
}
void MapgenV5::dustTopNodes()
{
if (node_max.Y < water_level)
return;
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index]);
if (biome->c_dust == CONTENT_IGNORE)
continue;
u32 vi = vm->m_area.index(x, full_node_max.Y, z);
content_t c_full_max = vm->m_data[vi].getContent();
s16 y_start;
if (c_full_max == CONTENT_AIR) {
y_start = full_node_max.Y - 1;
} else if (c_full_max == CONTENT_IGNORE) {
vi = vm->m_area.index(x, node_max.Y + 1, z);
content_t c_max = vm->m_data[vi].getContent();
if (c_max == CONTENT_AIR)
y_start = node_max.Y;
else
continue;
} else {
continue;
}
vi = vm->m_area.index(x, y_start, z);
for (s16 y = y_start; y >= node_min.Y - 1; y--) {
if (vm->m_data[vi].getContent() != CONTENT_AIR)
break;
vm->m_area.add_y(em, vi, -1);
}
content_t c = vm->m_data[vi].getContent();
if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE && c != biome->c_dust) {
vm->m_area.add_y(em, vi, 1);
vm->m_data[vi] = MapNode(biome->c_dust);
}
}
}
void MapgenV5::generateCaves(int max_stone_y)
{
if (max_stone_y < node_min.Y)
return;
noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
v3s16 em = vm->m_area.getExtent();
u32 index2d = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index2d++) {
bool column_is_open = false; // Is column open to overground
bool is_tunnel = false; // Is tunnel or tunnel floor
// Indexes at column top (node_max.Y)
u32 vi = vm->m_area.index(x, node_max.Y, z);
u32 index3d = (z - node_min.Z) * zstride_1d + csize.Y * ystride +
(x - node_min.X);
// Biome of column
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index2d]);
// Don't excavate the overgenerated stone at node_max.Y + 1,
// this creates a 'roof' over the tunnel, preventing light in
// tunnels at mapchunk borders when generating mapchunks upwards.
// This 'roof' is removed when the mapchunk above is generated.
for (s16 y = node_max.Y; y >= node_min.Y - 1; y--,
index3d -= ystride,
vm->m_area.add_y(em, vi, -1)) {
content_t c = vm->m_data[vi].getContent();
if (c == CONTENT_AIR || c == biome->c_water_top ||
c == biome->c_water) {
column_is_open = true;
continue;
}
// Ground
float d1 = contour(noise_cave1->result[index3d]);
float d2 = contour(noise_cave2->result[index3d]);
if (d1 * d2 > cave_width && ndef->get(c).is_ground_content) {
// In tunnel and ground content, excavate
vm->m_data[vi] = MapNode(CONTENT_AIR);
is_tunnel = true;
} else {
// Not in tunnel or not ground content
if (is_tunnel && column_is_open &&
(c == biome->c_filler || c == biome->c_stone))
// Tunnel entrance floor
vm->m_data[vi] = MapNode(biome->c_top);
column_is_open = false;
is_tunnel = false;
}
}
}
if (node_max.Y > MGV5_LARGE_CAVE_DEPTH)
return;
PseudoRandom ps(blockseed + 21343);
u32 bruises_count = ps.range(0, 2);
for (u32 i = 0; i < bruises_count; i++) {
CaveV5 cave(this, &ps);
cave.makeCave(node_min, node_max, max_stone_y);
}
}

View File

@ -48,34 +48,15 @@ struct MapgenV5Params : public MapgenSpecificParams {
};
class MapgenV5 : public Mapgen {
class MapgenV5 : public MapgenBasic {
public:
EmergeManager *m_emerge;
BiomeManager *bmgr;
int ystride;
int zstride_1d;
v3s16 node_min;
v3s16 node_max;
v3s16 full_node_min;
v3s16 full_node_max;
u32 spflags;
float cave_width;
Noise *noise_filler_depth;
Noise *noise_factor;
Noise *noise_height;
Noise *noise_cave1;
Noise *noise_cave2;
Noise *noise_ground;
content_t c_stone;
content_t c_water_source;
content_t c_lava_source;
content_t c_desert_stone;
content_t c_ice;
content_t c_sandstone;
content_t c_cobble;
content_t c_stair_cobble;
@ -90,9 +71,6 @@ public:
int getSpawnLevelAtPoint(v2s16 p);
void calculateNoise();
int generateBaseTerrain();
MgStoneType generateBiomes();
void generateCaves(int max_stone_y);
void dustTopNodes();
};

View File

@ -51,7 +51,7 @@ FlagDesc flagdesc_mapgen_v7[] = {
MapgenV7::MapgenV7(int mapgenid, MapgenParams *params, EmergeManager *emerge)
: Mapgen(mapgenid, params, emerge)
: MapgenBasic(mapgenid, params, emerge)
{
this->m_emerge = emerge;
this->bmgr = emerge->biomemgr;
@ -276,7 +276,7 @@ void MapgenV7::makeChunk(BlockMakeData *data)
MgStoneType stone_type = generateBiomes();
if (flags & MG_CAVES)
generateCaves(stone_surface_max_y);
generateCaves(stone_surface_max_y, water_level);
if ((flags & MG_DUNGEONS) && (stone_surface_max_y >= node_min.Y)) {
DungeonParams dp;
@ -517,225 +517,13 @@ void MapgenV7::generateRidgeTerrain()
}
MgStoneType MapgenV7::generateBiomes()
{
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
MgStoneType stone_type = STONE;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = NULL;
u16 depth_top = 0;
u16 base_filler = 0;
u16 depth_water_top = 0;
u32 vi = vm->m_area.index(x, node_max.Y, z);
// Check node at base of mapchunk above, either a node of a previously
// generated mapchunk or if not, a node of overgenerated base terrain.
content_t c_above = vm->m_data[vi + em.X].getContent();
bool air_above = c_above == CONTENT_AIR;
bool water_above = c_above == c_water_source;
// If there is air or water above enable top/filler placement, otherwise force
// nplaced to stone level by setting a number exceeding any possible filler depth.
u16 nplaced = (air_above || water_above) ? 0 : U16_MAX;
for (s16 y = node_max.Y; y >= node_min.Y; y--) {
content_t c = vm->m_data[vi].getContent();
// Biome is recalculated each time an upper surface is detected while
// working down a column. The selected biome then remains in effect for
// all nodes below until the next surface and biome recalculation.
// Biome is recalculated:
// 1. At the surface of stone below air or water.
// 2. At the surface of water below air.
// 3. When stone or water is detected but biome has not yet been calculated.
if ((c == c_stone && (air_above || water_above || !biome)) ||
(c == c_water_source && (air_above || !biome))) {
biome = biomegen->getBiomeAtIndex(index, y);
depth_top = biome->depth_top;
base_filler = MYMAX(depth_top + biome->depth_filler
+ noise_filler_depth->result[index], 0);
depth_water_top = biome->depth_water_top;
// Detect stone type for dungeons during every biome calculation.
// This is more efficient than detecting per-node and will not
// miss any desert stone or sandstone biomes.
if (biome->c_stone == c_desert_stone)
stone_type = DESERT_STONE;
else if (biome->c_stone == c_sandstone)
stone_type = SANDSTONE;
}
if (c == c_stone) {
content_t c_below = vm->m_data[vi - em.X].getContent();
// If the node below isn't solid, make this node stone, so that
// any top/filler nodes above are structurally supported.
// This is done by aborting the cycle of top/filler placement
// immediately by forcing nplaced to stone level.
if (c_below == CONTENT_AIR || c_below == c_water_source)
nplaced = U16_MAX;
if (nplaced < depth_top) {
vm->m_data[vi] = MapNode(biome->c_top);
nplaced++;
} else if (nplaced < base_filler) {
vm->m_data[vi] = MapNode(biome->c_filler);
nplaced++;
} else {
vm->m_data[vi] = MapNode(biome->c_stone);
}
air_above = false;
water_above = false;
} else if (c == c_water_source) {
vm->m_data[vi] = MapNode((y > (s32)(water_level - depth_water_top)) ?
biome->c_water_top : biome->c_water);
nplaced = 0; // Enable top/filler placement for next surface
air_above = false;
water_above = true;
} else if (c == CONTENT_AIR) {
nplaced = 0; // Enable top/filler placement for next surface
air_above = true;
water_above = false;
} else { // Possible various nodes overgenerated from neighbouring mapchunks
nplaced = U16_MAX; // Disable top/filler placement
air_above = false;
water_above = false;
}
vm->m_area.add_y(em, vi, -1);
}
}
return stone_type;
}
void MapgenV7::dustTopNodes()
{
if (node_max.Y < water_level)
return;
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index]);
if (biome->c_dust == CONTENT_IGNORE)
continue;
u32 vi = vm->m_area.index(x, full_node_max.Y, z);
content_t c_full_max = vm->m_data[vi].getContent();
s16 y_start;
if (c_full_max == CONTENT_AIR) {
y_start = full_node_max.Y - 1;
} else if (c_full_max == CONTENT_IGNORE) {
vi = vm->m_area.index(x, node_max.Y + 1, z);
content_t c_max = vm->m_data[vi].getContent();
if (c_max == CONTENT_AIR)
y_start = node_max.Y;
else
continue;
} else {
continue;
}
vi = vm->m_area.index(x, y_start, z);
for (s16 y = y_start; y >= node_min.Y - 1; y--) {
if (vm->m_data[vi].getContent() != CONTENT_AIR)
break;
vm->m_area.add_y(em, vi, -1);
}
content_t c = vm->m_data[vi].getContent();
if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE && c != biome->c_dust) {
vm->m_area.add_y(em, vi, 1);
vm->m_data[vi] = MapNode(biome->c_dust);
}
}
}
void MapgenV7::generateCaves(s16 max_stone_y)
{
if (max_stone_y < node_min.Y)
return;
noise_cave1->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
noise_cave2->perlinMap3D(node_min.X, node_min.Y - 1, node_min.Z);
v3s16 em = vm->m_area.getExtent();
u32 index2d = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index2d++) {
bool column_is_open = false; // Is column open to overground
bool is_tunnel = false; // Is tunnel or tunnel floor
// Indexes at column top (node_max.Y)
u32 vi = vm->m_area.index(x, node_max.Y, z);
u32 index3d = (z - node_min.Z) * zstride_1d + csize.Y * ystride +
(x - node_min.X);
// Biome of column
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index2d]);
// Don't excavate the overgenerated stone at node_max.Y + 1,
// this creates a 'roof' over the tunnel, preventing light in
// tunnels at mapchunk borders when generating mapchunks upwards.
// This 'roof' is removed when the mapchunk above is generated.
for (s16 y = node_max.Y; y >= node_min.Y - 1; y--,
index3d -= ystride,
vm->m_area.add_y(em, vi, -1)) {
content_t c = vm->m_data[vi].getContent();
if (c == CONTENT_AIR || c == biome->c_water_top ||
c == biome->c_water) {
column_is_open = true;
continue;
}
// Ground
float d1 = contour(noise_cave1->result[index3d]);
float d2 = contour(noise_cave2->result[index3d]);
if (d1 * d2 > cave_width && ndef->get(c).is_ground_content) {
// In tunnel and ground content, excavate
vm->m_data[vi] = MapNode(CONTENT_AIR);
is_tunnel = true;
} else {
// Not in tunnel or not ground content
if (is_tunnel && column_is_open &&
(c == biome->c_filler || c == biome->c_stone))
// Tunnel entrance floor
vm->m_data[vi] = MapNode(biome->c_top);
column_is_open = false;
is_tunnel = false;
}
}
}
if (node_min.Y >= water_level)
return;
PseudoRandom ps(blockseed + 21343);
u32 bruises_count = ps.range(0, 2);
for (u32 i = 0; i < bruises_count; i++) {
CaveV7 cave(this, &ps);
cave.makeCave(node_min, node_max, max_stone_y);
}
}
///////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
//// Code Boneyard
////
//// Much of the stuff here has potential to become useful again at some point
//// in the future, but we don't want it to get lost or forgotten in version
//// control.
////
#if 0
int MapgenV7::generateMountainTerrain(s16 ymax)

View File

@ -54,42 +54,24 @@ struct MapgenV7Params : public MapgenSpecificParams {
void writeParams(Settings *settings) const;
};
class MapgenV7 : public Mapgen {
class MapgenV7 : public MapgenBasic {
public:
EmergeManager *m_emerge;
BiomeManager *bmgr;
int ystride;
int zstride_1u1d;
int zstride_1d;
v3s16 node_min;
v3s16 node_max;
v3s16 full_node_min;
v3s16 full_node_max;
s16 *ridge_heightmap;
u32 spflags;
float cave_width;
Noise *noise_terrain_base;
Noise *noise_terrain_alt;
Noise *noise_terrain_persist;
Noise *noise_height_select;
Noise *noise_filler_depth;
Noise *noise_mount_height;
Noise *noise_ridge_uwater;
Noise *noise_mountain;
Noise *noise_ridge;
Noise *noise_cave1;
Noise *noise_cave2;
content_t c_stone;
content_t c_water_source;
content_t c_lava_source;
content_t c_desert_stone;
content_t c_ice;
content_t c_sandstone;
content_t c_cobble;
content_t c_stair_cobble;
@ -112,11 +94,6 @@ public:
int generateTerrain();
void generateRidgeTerrain();
MgStoneType generateBiomes();
void dustTopNodes();
void generateCaves(s16 max_stone_y);
};
struct MapgenFactoryV7 : public MapgenFactory {

View File

@ -65,7 +65,7 @@ static FlagDesc flagdesc_mapgen_valleys[] = {
MapgenValleys::MapgenValleys(int mapgenid, MapgenParams *params, EmergeManager *emerge)
: Mapgen(mapgenid, params, emerge)
: MapgenBasic(mapgenid, params, emerge)
{
this->m_emerge = emerge;
this->bmgr = emerge->biomemgr;
@ -302,7 +302,7 @@ void MapgenValleys::makeChunk(BlockMakeData *data)
// Cave creation.
if (flags & MG_CAVES)
generateCaves(stone_surface_max_y);
generateCaves(stone_surface_max_y, large_cave_depth);
// Dungeon creation
if ((flags & MG_DUNGEONS) && node_max.Y < 50 && (stone_surface_max_y >= node_min.Y)) {
@ -692,166 +692,7 @@ int MapgenValleys::generateTerrain()
return surface_max_y;
}
MgStoneType MapgenValleys::generateBiomes()
{
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
MgStoneType stone_type = STONE;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = NULL;
u16 depth_top = 0;
u16 base_filler = 0;
u16 depth_water_top = 0;
u32 vi = vm->m_area.index(x, node_max.Y, z);
// Check node at base of mapchunk above, either a node of a previously
// generated mapchunk or if not, a node of overgenerated base terrain.
content_t c_above = vm->m_data[vi + em.X].getContent();
bool air_above = c_above == CONTENT_AIR;
bool water_above = (c_above == c_water_source || c_above == c_river_water_source);
// If there is air or water above enable top/filler placement, otherwise force
// nplaced to stone level by setting a number exceeding any possible filler depth.
u16 nplaced = (air_above || water_above) ? 0 : U16_MAX;
for (s16 y = node_max.Y; y >= node_min.Y; y--) {
content_t c = vm->m_data[vi].getContent();
// Biome is recalculated each time an upper surface is detected while
// working down a column. The selected biome then remains in effect for
// all nodes below until the next surface and biome recalculation.
// Biome is recalculated:
// 1. At the surface of stone below air or water.
// 2. At the surface of water below air.
// 3. When stone or water is detected but biome has not yet been calculated.
if ((c == c_stone && (air_above || water_above || !biome))
|| ((c == c_water_source || c == c_river_water_source)
&& (air_above || !biome))) {
// Both heat and humidity have already been adjusted for altitude.
biome = biomegen->getBiomeAtIndex(index, y);
depth_top = biome->depth_top;
base_filler = MYMAX(depth_top
+ biome->depth_filler
+ noise_filler_depth->result[index], 0.f);
depth_water_top = biome->depth_water_top;
// Detect stone type for dungeons during every biome calculation.
// This is more efficient than detecting per-node and will not
// miss any desert stone or sandstone biomes.
if (biome->c_stone == c_desert_stone)
stone_type = DESERT_STONE;
else if (biome->c_stone == c_sandstone)
stone_type = SANDSTONE;
}
if (c == c_stone) {
content_t c_below = vm->m_data[vi - em.X].getContent();
// If the node below isn't solid, make this node stone, so that
// any top/filler nodes above are structurally supported.
// This is done by aborting the cycle of top/filler placement
// immediately by forcing nplaced to stone level.
if (c_below == CONTENT_AIR
|| c_below == c_water_source
|| c_below == c_river_water_source)
nplaced = U16_MAX;
if (nplaced < depth_top) {
vm->m_data[vi] = MapNode(biome->c_top);
nplaced++;
} else if (nplaced < base_filler) {
vm->m_data[vi] = MapNode(biome->c_filler);
nplaced++;
} else {
vm->m_data[vi] = MapNode(biome->c_stone);
}
air_above = false;
water_above = false;
} else if (c == c_water_source) {
vm->m_data[vi] = MapNode((y > (s32)(water_level - depth_water_top))
? biome->c_water_top : biome->c_water);
nplaced = 0; // Enable top/filler placement for next surface
air_above = false;
water_above = true;
} else if (c == c_river_water_source) {
vm->m_data[vi] = MapNode(biome->c_river_water);
nplaced = depth_top; // Enable filler placement for next surface
air_above = false;
water_above = true;
} else if (c == CONTENT_AIR) {
nplaced = 0; // Enable top/filler placement for next surface
air_above = true;
water_above = false;
} else { // Possible various nodes overgenerated from neighbouring mapchunks
nplaced = U16_MAX; // Disable top/filler placement
air_above = false;
water_above = false;
}
vm->m_area.add_y(em, vi, -1);
}
}
return stone_type;
}
void MapgenValleys::dustTopNodes()
{
if (node_max.Y < water_level)
return;
v3s16 em = vm->m_area.getExtent();
u32 index = 0;
for (s16 z = node_min.Z; z <= node_max.Z; z++)
for (s16 x = node_min.X; x <= node_max.X; x++, index++) {
Biome *biome = (Biome *)bmgr->getRaw(biomemap[index]);
if (biome->c_dust == CONTENT_IGNORE)
continue;
u32 vi = vm->m_area.index(x, full_node_max.Y, z);
content_t c_full_max = vm->m_data[vi].getContent();
s16 y_start;
if (c_full_max == CONTENT_AIR) {
y_start = full_node_max.Y - 1;
} else if (c_full_max == CONTENT_IGNORE) {
vi = vm->m_area.index(x, node_max.Y + 1, z);
content_t c_max = vm->m_data[vi].getContent();
if (c_max == CONTENT_AIR)
y_start = node_max.Y;
else
continue;
} else {
continue;
}
vi = vm->m_area.index(x, y_start, z);
for (s16 y = y_start; y >= node_min.Y - 1; y--) {
if (vm->m_data[vi].getContent() != CONTENT_AIR)
break;
vm->m_area.add_y(em, vi, -1);
}
content_t c = vm->m_data[vi].getContent();
if (!ndef->get(c).buildable_to && c != CONTENT_IGNORE && c != biome->c_dust) {
vm->m_area.add_y(em, vi, 1);
vm->m_data[vi] = MapNode(biome->c_dust);
}
}
}
void MapgenValleys::generateCaves(s16 max_stone_y)
void MapgenValleys::generateCaves(s16 max_stone_y, s16 large_cave_depth)
{
if (max_stone_y < node_min.Y)
return;

View File

@ -85,7 +85,7 @@ struct TerrainNoise {
float inter_valley_fill;
};
class MapgenValleys : public Mapgen {
class MapgenValleys : public MapgenBasic {
public:
MapgenValleys(int mapgenid, MapgenParams *params, EmergeManager *emerge);
@ -97,13 +97,9 @@ public:
s16 large_cave_depth;
private:
EmergeManager *m_emerge;
BiomeManager *bmgr;
BiomeGenOriginal *m_bgen;
int ystride;
int zstride;
int zstride_1d;
float map_gen_limit;
@ -113,11 +109,6 @@ private:
s16 cave_water_max_height;
s16 lava_max_height;
v3s16 node_min;
v3s16 node_max;
v3s16 full_node_min;
v3s16 full_node_max;
u32 spflags;
float altitude_chill;
s16 lava_features_lim;
@ -126,10 +117,6 @@ private:
float river_size_factor;
float *tcave_cache;
s16 water_features_lim;
float cave_width;
Noise *noise_filler_depth;
Noise *noise_cave1;
Noise *noise_cave2;
Noise *noise_inter_valley_fill;
Noise *noise_inter_valley_slope;
Noise *noise_rivers;
@ -139,19 +126,13 @@ private:
Noise *noise_valley_profile;
content_t c_cobble;
content_t c_desert_stone;
content_t c_dirt;
content_t c_ice;
content_t c_lava_source;
content_t c_mossycobble;
content_t c_river_water_source;
content_t c_sand;
content_t c_sandstone;
content_t c_sandstonebrick;
content_t c_stair_cobble;
content_t c_stair_sandstonebrick;
content_t c_stone;
content_t c_water_source;
float terrainLevelAtPoint(s16 x, s16 z);
@ -161,10 +142,7 @@ private:
float terrainLevelFromNoise(TerrainNoise *tn);
float adjustedTerrainLevelFromNoise(TerrainNoise *tn);
MgStoneType generateBiomes();
void dustTopNodes();
void generateCaves(s16 max_stone_y);
virtual void generateCaves(s16 max_stone_y, s16 large_cave_depth);
};
struct MapgenFactoryValleys : public MapgenFactory {