Since the file being logged to changes with each run, opening a log
file is a tad more involved than desirable when it's necessary to view
the log each time OBS is run. This new menu entry shortcuts opening the
file from the file system manually.
Add a checkbox named "Enforce streaming service encoder settings"
checkbox to advanced output. Disabling this checkbox allows the user to
optionally disable the enforcement of streaming service encoder
settings. I had a user complain that they didn't want to always have
the service's preferred encoder settings forced on them.
Before: After:
obs_service_gettype obs_service_get_type
It seems there was an API function that was missed when we were doing
our big API consistency update. Unsquishes obs_service_gettype to
obs_service_get_type.
Currently service settings are updated in real time via the properties
view, which means that OK/Cancel/Apply have no effect. This fixes that
by using the new type of properties view that operates only on settings
data, not an object.
Add a button to the main window to access advanced audio properties to
make it a bit more visible to users.
To facilitate this, the bottom part of the window was switched to a grid
layout.
Adds an 'advanced' mode to the output settings to allow more powerful
and complex streaming and recording options:
- Optionally use a different encoder for recording than for streaming to
allow the recording to use a different encoder or encoder settings if
desired (though at the cost if increased CPU usage depending on the
encoders being used)
- Use encoders other than x264
- Rescale the recording or streaming encoders in case the user wishes to
stream and record at different resolutions
- Select the specific mixer to use for recording and for streaming,
allowing the stream and recording to use separate mixers (to for
example allow a user to stream the game/mic audio but only record the
game audio)
- Use FFmpeg output for the recording button instead of only recording
h264/aac to FLV, allowing the user to output to various different
types of file formats or remote URLs, as well as allowing the user to
select and use different encoders and encoder settings that are
available in the FFmpeg library
- Optionally allow the use of multiple audio tracks in a single output
if the file formats or stream services support it
To accommodate multiple types of outputs, there has to be some level of
abstraction. The BasicOutputHandler structure will give us a way that
we can switch between different output configurations.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
This allows the usage of other resources in the style sheet, like
icons/etc, relative to the style sheet location. For example, to change
the main window app icon, add #OBSBasic { qproperty-windowIcon:
url("basic/newicon.png") } in the style sheet, where "basic/newicon.png"
is a path relative to the qss file location.
This will allow obs to load stylesheet.qss (Qt stylesheet). It enables
users to theme obs how they please within Qt stylesheet guidelines. A
default stylesheet is not yet available.
Changed:
char *os_get_config_path(const char *name);
To:
int os_get_config_path(char *dst, size_t size, const char *name);
Also added:
char *os_get_config_path_ptr(const char *name);
I don't like this function returning an allocation by default.
Similarly to what was done with the wide character conversion functions,
this function now operates on an array argument, and if you really want
to just get a pointer for convenience, you use the *_ptr version of the
function that clearly indicates that it's returning an allocation.
Use QDialogButtonBox to add "Okay" and "Cancel" buttons to the
properties dialog. The core functionality of the dialog is not changed;
I.E. the settings are still applied to the source as the user changes
them. If the user clicks "Okay", the dialog simply exits. If the user
clicks "Cancel", the original settings are reapplied to the source then
the dialog exits. If the window is closed by any other means (I.E. by
the main obs window closing) then the properties dialog prompts the user
if they changed anything and asks if they wish to save their settings.
In order to implement this last feature, a method of checking for open
dialogs and sending each a quit message is added to the closeEvent()
method for OBSBasic.
Because libobs-opengl is a public library, it's customary to have SONAME
embedded in the library file. Also remove the prefix override and
remove the prefixing "lib" from the output name. This also requires us
to pass the library file name to dlopen invocations.
Allows the color format, color space, and color range to be set by the
user. This will need user interface for in the future, though it'll
have to be an advanced setting that's hidden from the user by default
because I don't feel comfortable exposing this to a typical user.
This dialog gives options such as increasing audio past 100%, forcing
the audio of a source to mono, and setting the audio sync offset of a
source (which was an oft-requested feature)
This was an important change because we were originally using an
hard-coded 709/partial range color matrix for the output, which was
causing problems for people wanting to use different formats or color
spaces. This will now automatically generate the color matrix depending
on the format, color space, and range, or use an identity matrix if the
video format is RGB instead of YUV.
OBS Sparkle feeds have two extensions to vanilla Sparkle feeds:
- There can be two kinds of items per feed: (zipped) .app and .mpkg
via <ce:packageType>app|mpkg</ce:packageType> (default is mpkg)
- Feed items can be disabled via <ce:deployed>false</ce:deployed>; these
items will not be considered for updates unless
"[General] UpdateToUndeployed=1" is set the global config
Unlike other Sparkle implementations the FeedURL cannot be updated via user
preferences because we support multiple app packages with the same package
identifier but different FeedURL settings on the same machine
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
Sometimes certain drivers do not have the capability required to
initialize the graphics subsystem (mesa currently, for example).
Instead of saying "your hardware is too old", state that the drivers may
also be at fault.
The informative text is meant to be additional information, not the main
information. If you use informative text without using regular text, it
causes the message box to get all squishy.
Instead of having functions like obs_signal_handler() that can fail to
properly specify their actual intent in the name (does it signal a
handler, or does it return a signal handler?), always prefix functions
that are meant to get information with 'get' to make its functionality
more explicit.
Previous names: New names:
-----------------------------------------------------------
obs_audio obs_get_audio
obs_video obs_get_video
obs_signalhandler obs_get_signal_handler
obs_prochandler obs_get_proc_handler
obs_source_signalhandler obs_source_get_signal_handler
obs_source_prochandler obs_source_get_proc_handler
obs_output_signalhandler obs_output_get_signal_handler
obs_output_prochandler obs_output_get_proc_handler
obs_service_signalhandler obs_service_get_signal_handler
obs_service_prochandler obs_service_get_proc_handler
API Removed:
- graphics_t obs_graphics();
Replaced With:
- void obs_enter_graphics();
- void obs_leave_graphics();
Description:
obs_graphics() was somewhat of a pointless function. The only time
that it was ever necessary was to pass it as a parameter to
gs_entercontext() followed by a subsequent gs_leavecontext() call after
that. So, I felt that it made a bit more sense just to implement
obs_enter_graphics() and obs_leave_graphics() functions to do the exact
same thing without having to repeat that code. There's really no need
to ever "hold" the graphics pointer, though I suppose that could change
in the future so having a similar function come back isn't out of the
question.
Still, this at least reduces the amount of unnecessary repeated code for
the time being.
Changed:
- obs_source_gettype
To:
- enum obs_source_type obs_source_get_type(obs_source_t source);
- const char *obs_source_get_id(obs_source_t source);
This function was inconsistent for a number of reasons. First, it
returns both the ID and the type of source (input/transition/filter),
which is inconsistent with the name of "get type". Secondly, the
'squishy' naming convention which has just turned out to be bad
practice and causes inconsistencies. So it's now replaced with two
functions that just return the type and the ID.
Prefix with obs_ for the sake of consistency
Renamed enums:
- order_movement (now obs_order_movement)
Affected functions:
- obs_source_filter_setorder
- obs_sceneitem_setorder
The OBSBasic UI will now allow the use of a subdirectory of the user
application data directory for third-party plugins. Though I'm not
entirely sure if this ideal or not. Regardless, this is one of the
first (of many) steps towards a plugin manager.
On windows, this is %appdata%/obs-studio/plugins
On linux, this is ~/.obs-studio/plugins
On mac, this is ~/Library/Application Support/obs-sudio/plugins
Changed API:
- char *obs_find_plugin_file(const char *sub_path);
Changed to: char *obs_module_file(const char *file);
Cahnge it so you no longer need to specify a sub-path such as:
obs_find_plugin_file("module_name/file.ext")
Instead, now automatically handle the module data path so all you need
to do is:
obs_module_file("file.ext")
- int obs_load_module(const char *name);
Changed to: int obs_open_module(obs_module_t *module,
const char *path,
const char *data_path);
bool obs_init_module(obs_module_t module);
Change the module loading API so that if the front-end chooses, it can
load modules directly from a specified path, and associate a data
directory with it on the spot.
The module will not be initialized immediately; obs_init_module must
be called on the module pointer in order to fully initialize the
module. This is done so a module can be disabled by the front-end if
the it so chooses.
New API:
- void obs_add_module_path(const char *bin, const char *data);
These functions allow you to specify new module search paths to add,
and allow you to search through them, or optionally just load all
modules from them. If the string %module% is included, it will
replace it with the module's name when that string is used as a
lookup. Data paths are now directly added to the module's internal
storage structure, and when obs_find_module_file is used, it will look
up the pointer to the obs_module structure and get its data directory
that way.
Example:
obs_add_module_path("/opt/obs/my-modules/%module%/bin",
"/opt/obs/my-modules/%module%/data");
This would cause it to additionally look for the binary of a
hypthetical module named "foo" at /opt/obs/my-modules/foo/bin/foo.so
(or libfoo.so), and then look for the data in
/opt/obs/my-modules/foo/data.
This gives the front-end more flexibility for handling third-party
plugin modules, or handling all plugin modules in a custom way.
- void obs_find_modules(obs_find_module_callback_t callback, void
*param);
This searches the existing paths for modules and calls the callback
function when any are found. Useful for plugin management and custom
handling of the paths by the front-end if desired.
- void obs_load_all_modules(void);
Search through the paths and both loads and initializes all modules
automatically without custom handling.
- void obs_enum_modules(obs_enum_module_callback_t callback,
void *param);
Enumerates currently opened modules.
This refactors the sub-window code a bit so that instead of deleting the
window pointers, it calls QWidget::close() on them to safely trigger a
normal close on them instead (which will also delete them).
Moves setting the DeleteOnClose flag from inside of the Dialog classes
into the OBSBasic class, to make that behaviour more obvious.
Changed API functions:
libobs: obs_reset_video
Before, video initialization returned a boolean, but "failed" is too
little information, if it fails due to lack of device capabilities or
bad video device parameters, the front-end needs to know that.
The OBS Basic UI has also been updated to reflect this API change.
There's no need to initialize the map value to 0. What was happening is
that obs_scene_add was adding a ref to a non-existent value, which
simply created it and added 1, which is perfectly fine. Then,
obs_add_source would set the ref to 0, overwriting the existing value.
So this meant that if you didn't call them in the right order, it
wouldn't work properly, and would break, which was pretty stupid.
Turns out that if you access a map value that doesn't exist, it'll
create one with the default constructor of that type. In this case, int
will initialize to 0, which was exactly what we wanted in the first
place, and defeats the purpose of even needing to initialize the value
to 0. So, there's no need to manually set it to 0 in
OBSBasic::SourceAdded, or worry about the order in which the functions
are called.
Just goes to show you have to be careful with reference counting.
The status bar now displays:
- Auto-reconnect information (reconnecting and reconnect success)
- Dropped frames (as well as percentage of total video frames)
- Duration of session
- CPU usage of the program
- Kbp/s
The OBSBasic class is getting a bit big, so I separated out the
status bar code to its own class derived from QStatusBar.
Contains Move Up, Move Down, Move to Top, Move to Bottom. Also assigns
Ctrl-Up, Ctrl-Down, Ctrl-Home, Ctrl-End to each action.
This was also added to the right-click context menu popup for sources.
The removeItemAction just for a keyboard shortcut was unnecessary.
Instead, use the toolbar button to associate a shortcut with, and remove
the removeItemAction object.
jp9000
Socapex
Caleb Anderson
fryshorts
HomeWorld
Blackhive
Weikardzaena
Carl Fürstenberg
Palana
John Bradley
BtbN
Jkoan
Socapex