Allows adding scenes as scene items. Note that you will not be able to
add scenes if it detects infinite recursion (i.e. adding scene A to
scene B, then adding scene B to scene A), in that case it will just fail
to create the scene item.
Adds a little improvement to quality-of-life, a typical "View" menu with
the ability to show/hide the following (for now):
- Listbox toolbars
- Status bar
- Transitions pane (some people don't really need/use/care about it)
Allows the ability for users to make it so recording automatically
starts when they start streaming. Also adds the option to allow the
recording to continue when stream is stopped.
Closesjp9000/obs-studio#554
Allows the user to specify custom formatting for their recording file
names with many formatting options, viewed via tooltip. The options
have been added to the advanced settings section.
Closesjp9000/obs-studio#507
Implements transitions, and introduces "Studio Mode" which allows live
editing of the same or different scenes while preserving what's
currently being displayed.
Studio Mode offers a number of new features:
- The ability to edit different scenes or the same scene without
modifying what's currently being displayed (of course)
- The ability to set up "quick transitions" with a desired transition
and duration that can be assigned hotkeys
- The option to create full copies of all sources in the program scene
to allow editing of source properties of the same scene live without
modifying the output, or (by default) just use references. (Note
however that certain sources cannot be duplicated, such as capture
sources, media sources, and device sources)
- Swap Mode (enabled by default) which swaps the program scene with
the preview scene when a transition completes
Currently, only non-configurable transitions (transitions without
properties) are listed, and the only transitions available as of this
writing are fade and cut. In future versions more transitions will be
added, such as swipe, stingers, and many other various sort of
transitions, and the UI will support being able to add/configure/remove
those sort of configurable transitions.
OSX has an annoying feature called "BeamSync", which on later versions
of OSX is always on. For whatever reason, Apple devs decided to force
this feature to always be on, so applications must always render with
v-sync regardless of what they set their swap interval to.
This issue would cause syncing to the vertical refresh for each
additional active display, and wouldn't allow rendering above the
current refresh rate. This caused major rendering stalls and prevented
video frame timing from being accurate.
This fixes the issue by using an undocumented set of functions to
disable BeamSync. Note that because this is an undocumented method of
working around the issue, its existence cannot be guaranteed. If the
functions no longer exist for whatever reason, it will safely do
nothing.
These really are advanced options that users shouldn't need to change
normally, so moving them to advanced makes sense, and keeps them away
from users who don't know what they're doing.
Some streamers would accidentally hit start/stop streaming, which on
certain services would send out mass emails to all their followers.
This just adds options to general settings to optionally enable dialogs
that confirm whether to actually start/stop streaming when the button is
clicked.
Note: This functionality should probably be considered as a temporary
solution. Ideally, sources should not be visible on creation until the
user presses "OK" in the initial properties dialog. Also, the problem
of initial visibility can additionally be solved by implementing the
preview/program functionality. Once preview/program is implemented the
need for this patch will be negated, and the option should probably be
removed.
Closesjp9000/obs-studio#483
So certain high-profile individuals were complaining that it was
difficult to configure recording settings for quality in OBS. So, I
decided to add a very easy-to-use auto-configuration for high quality
encoding -- including lossless encoding. This feature will
automatically configure ideal recording settings based upon a specified
quality level.
Recording quality presets added to simple output:
- Same as stream: Copies the encoded streaming data with no extra usage
hit.
- High quality: uses a higher CRF value (starting at 23) if using x264.
- Indistinguishable quality: uses a low CRF value (starting at 16) if
using x264.
- Lossless will spawn an FFmpeg output that uses huffyuv encoding. If a
user tries to select lossless, they will be warned both via a dialog
prompt and a warning message in the settings window to ensure they
understand that it requires tremendous amounts of free space. It will
always use the AVI file format.
Extra Notes:
- When High/Indistinguishable quality is set, it will allow you to
select the recording encoder. Currently, it just allows you to select
x264 (at either veryfast or ultrafast). Later on, it'll be useful to
be able to set up pre-configured presets for hardware encoders once
more are implemented and tested.
- I decided to allow the use of x264 at both veryfast or ultrafast
presets. The reasoning is two-fold:
1.) ultrafast is perfectly viable even for near indistinguishable
quality as long as it has the appropriate CRF value. It's nice if you
want to record but would like to or need to reduce the impact of
encoding on the CPU. It will automatically compensate for the preset at
the cost of larger file size.
2.) It was suggested to just always use ultrafast, but ultrafast
requires 2-4x as much disk space for the same CRF (most likely due to
x264 compensating for the preset). Providing veryfast is important if
you really want to reduce file size and/or reduce blocking at lower
quality levels.
- When a recording preset is used, a secondary audio encoder is also
spawned at 192 bitrate to ensure high quality audio. I chose 192
because that's the limit of the media foundation aac encoder on
windows, which I want to make sure is used if available due to its
high performance.
- The CRF calculation is based upon resolution, quality, and whether
it's set to ultrafast. First, quality sets the base CRF, 23 for
"good" quality, 16 for "very high" quality. If set to ultrafast,
it'll subtract 2 points from the CRF value to help compensate. Lower
resolutions will also lower the CRF value to help improve higher
details with a smaller pixel ratio.
CBR is now always on by default for streaming, so there's no reason to
have a setting for this in particular. Still available in advanced
output settings of course, but simple output mode really should be kept
as simple as possible.
This is mostly just to remove the unnecessary clutter from the output
sections. The reconnect settings are generally rarely modified by users
as it is.
I added stream delay options to advanced settings not just because I
feel it's an advanced option, but also to reduce clutter in the outputs
section and its sub-sections, which already have far too many options as
it is.
This changes the way the advanced output section's FFmpeg output
settings work by allowing the user to select whether they want to output
to a file or output to a URL, and makes it so file names are
automatically generated like other recording outputs.
If they choose to output to a file, it'll only require an output
directory similarly to how other recording outputs work. They can
select a directory to output to rather than being required to type in a
full path and filename; the filename is automatically generated. The
extension is also automatically retrieved from libff depending on the
format selected.
Otherwise if they have Output to URL selected, it'll show a simple edit
box where they can type in the target URL.
Adds setting profiles to the basic user interface. For each profile, a
subdirectory for the profile will be created in
[config_dir]/obs-studio/basic/profiles which will contain the settings
data for each profile.
Adds scene collections to the menu bar, which allows you to duplicate,
rename, remove, or add clean new scene collections.
Scene files are now stored in ./obs-studio/basic/scenes directory with
filesystem-safe names.
The empty implementation for the QDataStream operators is necessary to fix
a Qt assertion: "QVariant::save: unable to save type
'std::vector<std::shared_ptr<OBSSignal> >' (type id: 1036)."
It doesn't seem like a full implementation of the stream operators would be
useful since the signal registration is very specific to the interaction
between the scenes and sources list, i.e. in case the scenes list ever accepts
scenes from sources (not 'obs_source's) other than itself (non InternalMove
drag&drop?) it would have to register those scenes with the libobs core which
should trigger the normal signal registration
This simply saves/loads the actual list widget item order.
The reason why this is done is because internally, libobs doesn't have a
list of scenes, it only has a list of sources. The list of scenes is
actually something artificially implemented by the basic window user
interface.
jp9000
cg2121
Jeremiah Senkpiel
bl
Palana
Christoph Hohmann
shousa