Add a button to the main window to access advanced audio properties to
make it a bit more visible to users.
To facilitate this, the bottom part of the window was switched to a grid
layout.
Adds an 'advanced' mode to the output settings to allow more powerful
and complex streaming and recording options:
- Optionally use a different encoder for recording than for streaming to
allow the recording to use a different encoder or encoder settings if
desired (though at the cost if increased CPU usage depending on the
encoders being used)
- Use encoders other than x264
- Rescale the recording or streaming encoders in case the user wishes to
stream and record at different resolutions
- Select the specific mixer to use for recording and for streaming,
allowing the stream and recording to use separate mixers (to for
example allow a user to stream the game/mic audio but only record the
game audio)
- Use FFmpeg output for the recording button instead of only recording
h264/aac to FLV, allowing the user to output to various different
types of file formats or remote URLs, as well as allowing the user to
select and use different encoders and encoder settings that are
available in the FFmpeg library
- Optionally allow the use of multiple audio tracks in a single output
if the file formats or stream services support it
This does a few small things
-Moves buttons down 20px to the same height as the list boxes
-Adds a QFrame around scrollArea for mixer list.
Q: Why was this done?
A: When you go to style the mixer list in regards to adding a border,
shadow, or glow, it needs to be done on the QFrame. If you do it on the
scrollArea itself, the scrollbars will overlap the bottom of the border,
causing the border to look cut-off. Additionally, the other two sources
and scenes list widgets already had frames, so they did not have this
problem.
This dialog gives options such as increasing audio past 100%, forcing
the audio of a source to mono, and setting the audio sync offset of a
source (which was an oft-requested feature)
The status bar now displays:
- Auto-reconnect information (reconnecting and reconnect success)
- Dropped frames (as well as percentage of total video frames)
- Duration of session
- CPU usage of the program
- Kbp/s
The OBSBasic class is getting a bit big, so I separated out the
status bar code to its own class derived from QStatusBar.
Contains Move Up, Move Down, Move to Top, Move to Bottom. Also assigns
Ctrl-Up, Ctrl-Down, Ctrl-Home, Ctrl-End to each action.
This was also added to the right-click context menu popup for sources.
The removeItemAction just for a keyboard shortcut was unnecessary.
Instead, use the toolbar button to associate a shortcut with, and remove
the removeItemAction object.
There's no reason to represent this value in terms of scale. Scale is a
useless value for users to use. What are they going to enter, 0.5?
2.0? 0.25?
Even if it can be subject to change by the source itself, and even if
it's still converted to scale internally, having it display the base
source size value is much more ideal for the user.
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
Implement the 'file path' in output settings, and implement the 'start
recording' button, though for the time being I'm just going to make it
use a directory rather than allow custom file names.
This file output will actually share the video and audio encoder with
the stream.
I don't really know what to do about MP4 -- I don't really like the idea
of saving directly in the program, if you do and the program crashes,
that MP4 file is lost. I'm contemplating making some sort of mp4 output
process stub. So no MP4 file output for the time being.
If you need MP4, just remux it with FFmpeg:
ffmpeg -i flv_file.flv -acodec copy -vcodec copy mp4_file.mp4
Added github gist API uploading to the help menu to help make problems a
bit easier to debug in the future. It's somewhat vital that this
functionality be implemented before any release in order to analyze any
given problem a user may be experiencing.
Add a 'source selection' dialog to replace the 'enter a name' dialog.
This new dialog allows you to make new instances of pre-existing sources
so that you can add a pre-existing source to a different scene, or in to
the same scene more than once.
Also started implementing locale.
Comtemplating switching to JSON-based locale later, so we can add things
like descriptions/disambiguation, and so we can use jansson's built-in
hash table when doing the string lookup.
- Add volume control
These volume controls are basically nothing more than sliders. They
look terrible and hopefully will be as temporary as they are
terrible.
- Allow saving of specific non-user sources via obs_load_source and
obs_save_source functions.
- Save data of desktop/mic audio sources (sync data, volume data, etc),
and load the data on startup.
- Make it so that a scene is created by default if first time using the
application. On certain operating systems where supported, a default
capture will be created. Desktop capture on mac, particularly. Not
sure what to do about windows because monitor capture on windows 7 is
completely terrible and is bad to start users off with.
It didn't really look very nice in most cases and the controls were
always compacted, doing this makes it look a bit better.
Also change it so the properties window shows the properties on the
bottom below the source rather than to the right, seeing as in most
cases the source has a greater width than height, and it feels just a
little bit better to look at (thought that's just my opinion).
Controls still stretch really far sometimes though, I wonder what should
be done about that to be honest. Maybe prevent it from scrolling to the
right?
- Updated the services API so that it links up with an output and
the output gets data from that service rather than via settings.
This allows the service context to have control over how an output is
used, and makes it so that the URL/key/etc isn't necessarily some
static setting.
Also, if the service is attached to an output, it will stick around
until the output is destroyed.
- The settings interface has been updated so that it can allow the
usage of service plugins. What this means is that now you can create
a service plugin that can control aspects of the stream, and it
allows each service to create their own user interface if they create
a service plugin module.
- Testing out saving of current service information. Saves/loads from
JSON in to obs_data_t, seems to be working quite nicely, and the
service object information is saved/preserved on exit, and loaded
again on startup.
- I agonized over the settings user interface for days, and eventually
I just decided that the only way that users weren't going to be
fumbling over options was to split up the settings in to simple/basic
output, pre-configured, and then advanced for advanced use (such as
multiple outputs or services, which I'll implement later).
This was particularly painful to really design right, I wanted more
features and wanted to include everything in one interface but
ultimately just realized from experience that users are just not
technically knowledgable about it and will end up fumbling with the
settings rather than getting things done.
Basically, what this means is that casual users only have to enter in
about 3 things to configure their stream: Stream key, audio bitrate,
and video bitrate. I am really happy with this interface for those
types of users, but it definitely won't be sufficient for advanced
usage or for custom outputs, so that stuff will have to be separated.
- Improved the JSON usage for the 'common streaming services' context,
I realized that JSON arrays are there to ensure sorting, while
forgetting that general items are optimized for hashing. So
basically I'm just using arrays now to sort items in it.
- Add a properties window for sources so that you can now actually edit
the settings for sources. Also, display the source by itself in the
window (Note: not working on mac, and possibly not working on linux).
When changing the settings for a source, it will call
obs_source_update on that source when you have modified any values
automatically.
- Add a properties 'widget', eventually I want to turn this in to a
regular nice properties view like you'd see in the designer, but
right now it just uses a form layout in a QScrollArea with regular
controls to display the properties. It's clunky but works for the
time being.
- Make it so that swap chains and the main graphics subsystem will
automatically use at least one backbuffer if none was specified
- Fix bug where displays weren't added to the main display array
- Make it so that you can get the properties of a source via the actual
pointer of a source/encoder/output in addition to being able to look
up properties via identifier.
- When registering source types, check for required functions (wasn't
doing it before). getheight/getwidth should not be optional if it's
a video source as well.
- Add an RAII OBSObj wrapper to obs.hpp for non-reference-counted
libobs pointers
- Add an RAII OBSSignal wrapper to obs.hpp for libobs signals to
automatically disconnect them on destruction
- Move the "scale and center" calculation in window-basic-main.cpp to
its own function and in its own source file
- Add an 'update' callback to WASAPI audio sources
- Add some temporary streaming code using FFmpeg. FFmpeg itself is not
very ideal for streaming; lack of direct control of the sockets and
no framedrop handling means that FFmpeg is definitely not something
you want to use without wrapper code. I'd prefer writing my own
network framework in this particular case just because you give away
so much control of the network interface. Wasted an entire day
trying to go through FFmpeg issues.
There's just no way FFmpeg should be used for real streaming (at
least without being patched or submitting some sort of patch, but I'm
sort of feeling "meh" on that idea)
I had to end up writing multiple threads just to handle both
connecting and writing, because av_interleaved_write_frame blocks
every call, stalling the main encoder thread, and thus also stalling
draw signals.
- Add some temporary user interface for streaming settings. This is
just temporary for the time being. It's in the outputs section of
the basic-mode settings
- Make it so that dynamic arrays do not free all their data when the
size just happens to be reduced to 0. This prevents constant
reallocation when an array keeps going from 1 item to 0 items. Also,
it was bad to become dependent upon that functionality. You must now
always explicitly call "free" on it to ensure the data is free, and
that's how it should be. Implicit functionality can lead to
confusion and maintainability issues.
Modify the obs_display API so that it always uses an orthographic
projection that is the size of the display, rather than OBS' base size.
Having it do an orthographic projection to OBS' base size was silly
because it meant that everything would be skewed if you wanted to draw
1:1 in the display. This deoes mean that the callbacks must handle
resizing the images, but it's worth it to ensure 1:1 draw sizes.
As for the preview widget, instead of making some funky widget within
widget that resizes, it's just going to be a widget within the entire
top layout. Also changed the preview padding color to gray.
FFmpeg test output wasn't make any attempt to sync data before. Should
be much more accurate now.
Also, added a restart message to audio settings if base audio settings
are changed.
Split off activate to activate and show callbacks, and split off
deactivate to deactivate and hide callbacks. Sources didn't previously
have a means to know whether it was actually being displayed in the main
view or just happened to be visible somewhere. Now, for things like
transition sources, they have a means of knowing when they have actually
been "activated" so they can initiate their sequence.
A source is now only considered "active" when it's being displayed by
the main view. When a source is shown in the main view, the activate
callback/signal is triggered. When it's no longer being displayed by
the main view, deactivate callback/signal is triggered.
When a source is just generally visible to see by any view, the show
callback/signal is triggered. If it's no longer visible by any views,
then the hide callback/signal is triggered.
Presentation volume will now only be active when a source is active in
the main view rather than also in auxilary views.
Also fix a potential bug where parents wouldn't properly increment or
decrement all the activation references of a child source when a child
was added or removed.
Implement a few audio options in to the user interface as well as a few
inline audio functions in audio-io.h.
Make it so ffmpeg plugin automatically converts to the desired format.
Use regular interleaved float internally for audio instead of planar
float.
This allows the changing of bideo settings without having to completely
reset all graphics data. Will recreate internal output/conversion
buffers and such and reset the main preview.
jp9000
Blackhive
HomeWorld
Palana
John Bradley
fryshorts