clicked() is the wrong signal to use, it only activates on actual user
click, not when the value is changed. toggle() activates whenever the
value itself is changed.
For the 'output resolution' setting in video settings, do not show
values in the list that it does not support (width must be aligned to a
128bit boundry, and height must be divisible by two)
For the 'rescale' settings in advanced outputs, the scales must all be
divisible by two.
The 'rescale' values in advanced output section are supposed to be based
upon the output resolution of the program. Meaning they should not be
used for scaling up, because the resolution downloaded from the graphics
processor is the output resolution set in video settings; thus any
resolution you set for the 'rescale' values is scaled from that.
The "rescale" option for streaming in the advanced output settings was
not properly checking the parameter output of sscanf. sscanf returns
the number of values that were found, not the number of string matches.
To prevent from causing confusion/issues for our most awesome and
respected locale editors, only localize and translate the relevant text
rather than the extensions of the filter.
Before: After:
obs_service_gettype obs_service_get_type
It seems there was an API function that was missed when we were doing
our big API consistency update. Unsquishes obs_service_gettype to
obs_service_get_type.
Currently service settings are updated in real time via the properties
view, which means that OK/Cancel/Apply have no effect. This fixes that
by using the new type of properties view that operates only on settings
data, not an object.
Add a button to the main window to access advanced audio properties to
make it a bit more visible to users.
To facilitate this, the bottom part of the window was switched to a grid
layout.
Adds an 'advanced' mode to the output settings to allow more powerful
and complex streaming and recording options:
- Optionally use a different encoder for recording than for streaming to
allow the recording to use a different encoder or encoder settings if
desired (though at the cost if increased CPU usage depending on the
encoders being used)
- Use encoders other than x264
- Rescale the recording or streaming encoders in case the user wishes to
stream and record at different resolutions
- Select the specific mixer to use for recording and for streaming,
allowing the stream and recording to use separate mixers (to for
example allow a user to stream the game/mic audio but only record the
game audio)
- Use FFmpeg output for the recording button instead of only recording
h264/aac to FLV, allowing the user to output to various different
types of file formats or remote URLs, as well as allowing the user to
select and use different encoders and encoder settings that are
available in the FFmpeg library
- Optionally allow the use of multiple audio tracks in a single output
if the file formats or stream services support it
To accommodate multiple types of outputs, there has to be some level of
abstraction. The BasicOutputHandler structure will give us a way that
we can switch between different output configurations.
If the properties view is scrolled down or right and a widget triggers
it to repaint, it would reset its scroll position, making editing a bit
awkward. This simply saved/restores the position before and after
rebuilding the properties view.
Allows a properties view control to be created only with an identifier
string instead of only being created with a pointer to an object. This
way, we don't necessarily have to have an object for some arbitrary
settings we want the user to be able to modify.
Implement the signals for the mixer checkboxes in the advanced audio
control so that it properly relays the values to/from the source when
the mixers are changed in obs or when the mixers are changed by the
user.
In the advanced audio properties, the last set of controls designate
what tracks the audio of a specific source is applied to, but for some
reason I named it 'Media Channels'. It feels a bit confusing of a name.
I feel like it should really just be called 'Tracks' here for lack of a
better term.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
This allows the usage of other resources in the style sheet, like
icons/etc, relative to the style sheet location. For example, to change
the main window app icon, add #OBSBasic { qproperty-windowIcon:
url("basic/newicon.png") } in the style sheet, where "basic/newicon.png"
is a path relative to the qss file location.
When you launch the source properties for the first time, the settings
for the source are empty and default values are used. With the new
OK/Cancel buttons that were recently merged, it first saves the old
settings, then if the user cancels applies those old settings.
However, because the first settings are always empty, obs_source_update
will try to apply the old settings (which are empty) to the modified
settings, but it can't reset to those settings because it's technically
not applying any settings at all.
In other words, when you create the source and modified the properties
for your first time, pressing cancel would not reset anything at all.
This fixes that issue by clearing the current settings with
obs_data_clear before updating the source with the old settings, which
ensures that any settings that were empty are reset to an empty status.
This will allow obs to load stylesheet.qss (Qt stylesheet). It enables
users to theme obs how they please within Qt stylesheet guidelines. A
default stylesheet is not yet available.
The class members were listed in the wrong order, causing GCC to throw
up a reorder warning signifying that they cannot be initialized in the
order they were listed in the constructor initializer list.
Changed:
char *os_get_config_path(const char *name);
To:
int os_get_config_path(char *dst, size_t size, const char *name);
Also added:
char *os_get_config_path_ptr(const char *name);
I don't like this function returning an allocation by default.
Similarly to what was done with the wide character conversion functions,
this function now operates on an array argument, and if you really want
to just get a pointer for convenience, you use the *_ptr version of the
function that clearly indicates that it's returning an allocation.
Use QDialogButtonBox to add "Okay" and "Cancel" buttons to the
properties dialog. The core functionality of the dialog is not changed;
I.E. the settings are still applied to the source as the user changes
them. If the user clicks "Okay", the dialog simply exits. If the user
clicks "Cancel", the original settings are reapplied to the source then
the dialog exits. If the window is closed by any other means (I.E. by
the main obs window closing) then the properties dialog prompts the user
if they changed anything and asks if they wish to save their settings.
In order to implement this last feature, a method of checking for open
dialogs and sending each a quit message is added to the closeEvent()
method for OBSBasic.
This does a few small things
-Moves buttons down 20px to the same height as the list boxes
-Adds a QFrame around scrollArea for mixer list.
Q: Why was this done?
A: When you go to style the mixer list in regards to adding a border,
shadow, or glow, it needs to be done on the QFrame. If you do it on the
scrollArea itself, the scrollbars will overlap the bottom of the border,
causing the border to look cut-off. Additionally, the other two sources
and scenes list widgets already had frames, so they did not have this
problem.
This will allow styling of the volume meters so that users are not stuck
with the default colors when they style a theme. Volume meters' colors can
be changed in stylesheet.qss using the following format as an example:
VolumeMeter {
qproperty-bkColor: #DDDDDD;
qproperty-magColor: #207D17;
qproperty-peakColor: #3EF12B;
qproperty-peakHoldColor: #000000;
}
Because libobs-opengl is a public library, it's customary to have SONAME
embedded in the library file. Also remove the prefix override and
remove the prefixing "lib" from the output name. This also requires us
to pass the library file name to dlopen invocations.
Allows the color format, color space, and color range to be set by the
user. This will need user interface for in the future, though it'll
have to be an advanced setting that's hidden from the user by default
because I don't feel comfortable exposing this to a typical user.
This setSizeConstraint(QLayout::SetMaximumSize) call
caused the widgets to be improperly sized.
For example: combo boxes with long texts ('big' widget width) not
being completly visible.
The default behavior of QListWidget is to allow double clicks of any
mouse button, but in certain situations/usage cases this can cause
undesirable results. As an example: when double-clicking with the right
mouse button on an item in the sources list box, it will open up both
the properties window and the context menu. Not pretty at all.
This subclass filters out double clicks for any mouse button other than
the left mouse button to fix this issue.
jp9000
dodgepong
martell
HomeWorld
Blackhive
Weikardzaena
Carl Fürstenberg