- Implement the RTMP output module. This time around, we just use a
simple FLV muxer, then just write to the stream with RTMP_Write.
Easy and effective.
- Fix the FLV muxer, the muxer now outputs proper FLV packets.
- Output API:
* When using encoders, automatically interleave encoded packets
before sending it to the output.
* Pair encoders and have them automatically wait for the other to
start to ensure sync.
* Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop'
because it was a bit confusing, and doing this makes a lot more
sense for outputs that need to stop suddenly (disconnections/etc).
- Encoder API:
* Remove some unnecessary encoder functions from the actual API and
make them internal. Most of the encoder functions are handled
automatically by outputs anyway, so there's no real need to expose
them and end up inadvertently confusing plugin writers.
* Have audio encoders wait for the video encoder to get a frame, then
start at the exact data point that the first video frame starts to
ensure the most accrate sync of video/audio possible.
* Add a required 'frame_size' callback for audio encoders that
returns the expected number of frames desired to encode with. This
way, the libobs encoder API can handle the circular buffering
internally automatically for the encoder modules, so encoder
writers don't have to do it themselves.
- Fix a few bugs in the serializer interface. It was passing the wrong
variable for the data in a few cases.
- If a source has video, make obs_source_update defer the actual update
callback until the tick function is called to prevent threading
issues.
- obs-outputs module: Add preliminary code to send out data, and add
an FLV muxer. This time we don't really need to build the packets
ourselves, we can just use the FLV muxer and send it directly to
RTMP_Write and it should automatically parse the entire stream for us
without us having to do much manual code at all. We'll see how it
goes.
- libobs: Add AVC NAL packet parsing code
- libobs/media-io: Add quick helper functions for audio/video to get
the width/height/fps/samplerate/etc rather than having to query the
info structures each time.
- libobs (obs-output.c): Change 'connect' signal to 'start' and 'stop'
signals. 'start' now specifies an error code rather than whether it
simply failed, that way the client can actually know *why* a failure
occurred. Added those error codes to obs-defs.h.
- libobs: Add a few functions to duplicate/free encoder packets
- Implement OBS encoder interface. It was previously incomplete, but
now is reaching some level of completion, though probably should
still be considered preliminary.
I had originally implemented it so that encoders only have a 'reset'
function to reset their parameters, but I felt that having both a
'start' and 'stop' function would be useful.
Encoders are now assigned to a specific video/audio media output each
rather than implicitely assigned to the main obs video/audio
contexts. This allows separate encoder contexts that aren't
necessarily assigned to the main video/audio context (which is useful
for things such as recording specific sources). Will probably have
to do this for regular obs outputs as well.
When creating an encoder, you must now explicitely state whether that
encoder is an audio or video encoder.
Audio and video can optionally be automatically converted depending
on what the encoder specifies.
When something 'attaches' to an encoder, the first attachment starts
the encoder, and the encoder automatically attaches to the media
output context associated with it. Subsequent attachments won't have
the same effect, they will just start receiving the same encoder data
when the next keyframe plays (along with SEI if any). When detaching
from the encoder, the last detachment will fully stop the encoder and
detach the encoder from the media output context associated with the
encoder.
SEI must actually be exported separately; because new encoder
attachments may not always be at the beginning of the stream, the
first keyframe they get must have that SEI data in it. If the
encoder has SEI data, it needs only add one small function to simply
query that SEI data, and then that data will be handled automatically
by libobs for all subsequent encoder attachments.
- Implement x264 encoder plugin, move x264 files to separate plugin to
separate necessary dependencies.
- Change video/audio frame output structures to not use const
qualifiers to prevent issues with non-const function usage elsewhere.
This was an issue when writing the x264 encoder, as the x264 encoder
expects non-const frame data.
Change stagesurf_map to return a non-const data type to prevent this
as well.
- Change full range parameter of video scaler to be an enum rather than
boolean
...The reason why audio didn't work was because I overwrote the bitrate
values.
As for semaphores, mac doesn't support unnamed semaphores without using
mach semaphores. So, I just implemented a semaphore wrapper for each
OS.
- Fix a bug where the initial audio data insertion would cause all
audio data to unintentionally clear (mixed up < and > operators, damn
human error)
- Fixed a potential interdependant lock scenario with channel mutex
locks and graphics mutex locks. The main video thread could lock the
graphics mutex and then while in the graphics mutex could lock the
channels mutex. Meanwhile in another thread, the channel mutex could
get locked, and then the graphics mutex would get locked, causing a
deadlock.
The best way to deal with this is to not let mutexes lock within
other mutexes, but sometimes it's difficult to avoid such as in the
main video thread.
- Audio devices should now be functional, and the devices in the audio
settings can now be changed as desired.
- Implement windows monitor capture (code is so much cleaner than in
OBS1). Will implement duplication capture later
- Add GDI texture support to d3d11 graphics library
- Fix precision issue with sleep timing, you have to call
timeBeginPeriod otherwise windows sleep will be totally erratic.
LOG_ERROR should be used in places where though recoverable (or at least
something that can be handled safely), was unexpected, and may affect
the user/application.
LOG_WARNING should be used in places where it's not entirely unexpected,
is recoverable, and doesn't really affect the user/application.
- Add CoreAudio device input capture for mac audio capturing. The code
should cover just about everything for capturing mac input device
audio. Because of the way mac audio is designed, users may have no
choice but to obtain the open source soundflower software to capture
their mac's desktop audio. It may be necessary for us to distribute
it with the program as well.
- Hide event backend
- Use win32 events for windows
- Allow timed waits for events
- Fix a few warnings
Implement a few audio options in to the user interface as well as a few
inline audio functions in audio-io.h.
Make it so ffmpeg plugin automatically converts to the desired format.
Use regular interleaved float internally for audio instead of planar
float.
This allows the changing of bideo settings without having to completely
reset all graphics data. Will recreate internal output/conversion
buffers and such and reset the main preview.
Make it so obs_data settings input in to *_update are applied to the
existing settings rather than fully replace the existing settings. That
way you can update with only certain specific settings, leaving other
settings untouched. Of course if you're already using the original
settings pointer in the first place then you've already done that, so
it'll just ignore it because you've already applied them.
I actually did compile that last commit and misread the failed projects
as 0. I'm just going to put the conversion stuff in video-io.h stuff
because it requires it anyway, and video-scaler.h already depends on
video-io.h for the video_format enum anyway.
Add a scaler interface (defaults to swscale), and if a separate output
wants to use a different scale or format than the default output format,
allow a scaler instance to be created automatically for that output,
which will then receive the new scaled output.
If there are for example more than one audio outputs and they have
different sample rates or channels and such, this will allow automatic
conversion of that audio to the request formats/channels/rates (but only
if requested).
There were a *lot* of warnings, managed to remove most of them.
Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after,
as -Wall -Wextra was overwriting flags that came before it.
The API used to be designed in such a way to where it would expect
exports for each individual source/output/encoder/etc. You would export
functions for each and it would automatically load those functions based
on a specific naming scheme from the module.
The idea behind this was that I wanted to limit the usage of structures
in the API so only functions could be used. It was an interesting idea
in theory, but this idea turned out to be flawed in a number of ways:
1.) Requiring exports to create sources/outputs/encoders/etc meant that
you could not create them by any other means, which meant that
things like faruton's .net plugin would become difficult.
2.) Export function declarations could not be checked, therefore if you
created a function with the wrong parameters and parameter types,
the compiler wouldn't know how to check for that.
3.) Required overly complex load functions in libobs just to handle it.
It makes much more sense to just have a load function that you call
manually. Complexity is the bane of all good programs.
4.) It required that you have functions of specific names, which looked
and felt somewhat unsightly.
So, to fix these issues, I replaced it with a more commonly used API
scheme, seen commonly in places like kernels and typical C libraries
with abstraction. You simply create a structure that contains the
callback definitions, and you pass it to a function to register that
definition (such as obs_register_source), which you call in the
obs_module_load of the module.
It will also automatically check the structure size and ensure that it
only loads the required values if the structure happened to add new
values in an API change.
The "main" source file for each module must include obs-module.h, and
must use OBS_DECLARE_MODULE() within that source file.
Also, started writing some doxygen documentation in to the main library
headers. Will add more detailed documentation as I go.
- Fill in the rest of the FFmpeg test output code for testing so it
actually properly outputs data.
- Improve the main video subsystem to be a bit more optimal and
automatically output I420 or NV12 if needed.
- Fix audio subsystem insertation and byte calculation. Now it will
seamlessly insert new audio data in to the audio stream based upon
its timestamp value. (Be extremely cautious when using floating
point calculations for important things like this, and always round
your values and check your values)
- Use 32 byte alignment in case of future optimizations and export a
function to get the current alignment.
- Make os_sleepto_ns return true if slept, false if the time has
already been passed before the call.
- Fix sinewave output so that it actually properly calculates a middle
C sinewave.
- Change the use of row_bytes to linesize (also makes it a bit more
consistent with FFmpeg's naming as well)
- Add planar audio support. FFmpeg and libav use planar audio for many
encoders, so it was somewhat necessary to add support in libobs
itself.
- Improve/adjust FFmpeg test output plugin. The exports were somewhat
messed up (making me rethink how exports should be done). Not yet
functional; it handles video properly, but it still does not handle
audio properly.
- Improve planar video code. The planar video code was not properly
accounting for row sizes for each plane. Specifying row sizes for
each plane has now been added. This will also make it more compatible
with FFmpeg/libav.
- Fixed a bug where callbacks wouldn't create properly in audio-io and
video-io code.
- Implement 'blogva' function to allow for va_list usage with libobs
logging.
- Added some code for FFmpeg output that I'm still playing around with.
Right now I'm just trying to get it to output to file and try to
understand the FFmpeg/libav APIs. Hopefully in the future this plugin
can be used for any sort of output to FFmpeg.
- Fixed a cast warning in audio-io.c with size_t -> uint32_t
- Renamed the 'video_info' and 'audio_info' structures to
'video_conver_info' and 'audio_convert_info' to better represent their
actual purpose, and to avoid confusion with 'audio_output_info' and
'video_output_info' structures.
- Removed a few macros from obs-def.h that were at one point going to be
used but no longer going to be used (at least for now)
Completely revamped the entire media i/o data and handlers. The
original idea was to have a system that would have connecting media
inputs and outputs, but at a certain point I realized that this was an
unnecessary complexity for what we wanted to do. (Also, it reminded me
of directshow filters, and I HATE directshow with a passion, and
wouldn't wish it upon my greatest enemy)
Now, audio/video outputs are connected to directly, with better callback
handlers, and will eventually have the ability to automatically handle
conversions such as 4:4:4 to 4:2:0 when connecting to an input that uses
them. Doing this will allow the video/audio i/o handlers to also
prevent duplicate conversion, as well as make it easier/simple to use.
My true goal for this is to make output and encoder plugins as simple to
create as possible. I want to be able to be able to create an output
plugin with almost no real hassle of having to worry about image
conversions, media inputs/outputs, etc. A plugin developer shouldn't
have to handle that sort of stuff when he/she doesn't really need to.
Plugins will be able to simply create a callback via obs_video() and/or
obs_audio(), and they will automatically receive the audio/video data in
the formats requested via a simple callback, without needing to do
almost anything else at all.
- Add preliminary (yet to be tested) handling of timestamp invalidation
issues that can happen with specific devices, where timestamps can
reset or go backward/forward in time with no rhyme or reason. Spent
the entire day just trying to figure out the best way to handle this.
If both audio and video are present, it will increment a reference
counter if video timestamps invalidate, and decrement the reference
counter when the audio timestamps invalidate. When the reference
counter is not 0, it will not send audio as the audio will have
invalid timing. What this does is it ensures audio data will never go
out of bounds in relation to the video, and waits for both audio and
video timestamps to "jump" together before resuming audio.
- Moved async video frame timing adjustment code into
obs_source_getframe instead so it's automatically handled whenever
called.
- Removed the 'audio wait buffer' as it was an unnecessary complexity
that could have had problems in the future. Instead, audio will not
be added until video starts for sources that have both async
audio/video. Audio could have buffered for too long of a time anyway,
who knows what devices are going to do.
- Fixed a minor conversion warning in audio-io.c
- In the audio I/O code, if there's a pause in the program or its
threads (especially the audio thread), it'll cause it to sample too
much data, and increase line->base_timestamp to a potentially higher
value than the next audio timestamp that may be added to the line.
This would cause it to crash originally, because it expects audio
data that is within the designated buffering limit.
Because that audio data cannot be filled by that data anyway, just
ignore the audio data until it goes back to the right timing (which
it will as long as the code that is using the line accounts for its
current system time)
- Audio data was just being popped to the "front" of the mix buffer, so
instead it now properly pops into the correct position in the mix
buffer (proper mixing still needs to be implemented)
- Added a test audio sinewave test source that should just play a sine
wave of the middle C note. Using unsigned 8 bit mono to test
ffmpeg's audio resampler, seems to work pretty good.
- Fixed a boolean trap in threading.h for the event_init function, it
now uses enum event_type, which can be EVENT_TYPE_MANUAL or
EVENT_TYPE_AUTO, to specify whether the event is automatically reset
or not.
- Changed display names of test sources to something a little less
vague.
- Removed te whole "if timestamp is 0 just use current system time"
when outputting source audio, if you want to use system time you
should just use system time yourself. Using 0 as some sort of
"indicator" like that just makes things confusing, and prevents you
from legitimately using 0 as a timestamp for your audio data.
- Mixing still isn't implemented, but the audio system should be able
to start up, and mix at least once audio line for the time being.
Will have to write some test audio sources to verify things are
working properly, and build the rest of the output functionality.
- Apply the volume specified with the audio data packet before
inserting the audio data into the circular buffer. Added functions
for multiplying the volume with all the different audio bit depths.
(Could probably be greatly optmimized later)
- Added a volume variable to the obs_source structure and implemented
functions for manipulating source volume.
- Added a volume variable to the audio_data structure so that the
volume will be applied when mixing.
Danni
BtbN
fryshorts
jp9000
Palana
Peter SZTANOJEV