(Note: This commit also modifies coreaudio-encoder, win-capture, and
win-mf modules)
This reduces logging to the user's log file. Most of the things
specified are not useful for examining log files, and make reading log
files more painful.
The things that are useful to log should be up to the front-end to
implement. The core and core plugins should have minimal mandatory
logging.
With the new audio subsystem, audio buffering is minimal at all times.
However, when the audio buffering is too small or non-existent, it would
cause the audio encoders to start with a timestamp that was actually
higher than the first video frame timestamp. Video would have some
inherent buffering/delay, but then audio could return and encode almost
immediately. This created a possible window of empty time between the
first encoded video packet and the first encoded audio packet, where as
audio buffering would cause the first audio packet's timestamp to always
be way before the first video packet's timestamp. It would then
incorrectly assume the two starting points were in sync.
So instead of assuming the audio data is always first, this patch makes
video wait for audio data comes in, and conversely buffers audio data
until video comes in, and tries to find a starting point within that
video data instead, ensuring a synced starting point whether audio
buffering is active or not.
Ensures that the packet dts_usec vals which are generated for
syncing/interleaving use the proper offset relative to where they're
supposed to be starting from. The negative DTS of a first video packet
could potentially have been applied twice due to this.
API changed from:
obs_source_info::get_name(void)
obs_output_info::get_name(void)
obs_encoder_info::get_name(void)
obs_service_info::get_name(void)
API changed to:
obs_source_info::get_name(void *type_data)
obs_output_info::get_name(void *type_data)
obs_encoder_info::get_name(void *type_data)
obs_service_info::get_name(void *type_data)
This allows the type data to be used when getting the name of the
object (useful for plugin wrappers primarily).
NOTE: Though a parameter was added, this is backward-compatible with
older plugins due to calling convention. The new parameter will simply
be ignored by older plugins, and the stack (if used) will be cleaned up
by the caller.
This prevents encoders (hardware encoders in particular) from being
continually active when all outputs disconnect from an encoder. This is
mostly just a temporary measure; the encoding interface may need a bit
of a redesign. It will also definitely needs to be able to flush at
some point. Currently when an output is stopped, the pending data is
discarded, which needs to be fixed.
Allows objects to be created regardless of whether the actual id exists
or not. This is a precaution that preserves objects/settings if for
some reason the id was removed for whatever reason (plugin removed, or
hardware encoder that disappeared). This was already added for sources,
but really needs to be added for other libobs objects as well: outputs,
encoders, services.
In case the encoder has to use a different sample rate (due to the
sample rate being unsupported), we need an API function for the encoder
to get the sample rate that the encoder is actually running at.
I realized that the get_video_info and get_audio_info encoder callbacks
always have to manually query the libobs audio/video information.
This fixes that problem by passing the libobs video/audio information in
the structures passed to those callbacks so they don't have to query it
each time, reducing needless boilerplate code for encoders.
Allows the ability to hint at encoders what format should be used.
This is particularly useful if libobs is currently operating in planar
4:4:4, but you want to force an encoder used for streaming to convert to
NV12 to prevent streaming issues.
When using multiple video encoders together with a single audio encoder,
the audio wouldn't be in sync.
The reason why this occurred is because the dts_usec variable of the
encoder packet (which is based on system time) would always be reset to
a value based upon the dts (which is not guaranteed to be based on
system time) in the apply_interleaved_packet_offset function. This
would then in turn cause it to miscalculate the starting audio/video
offsets, which are required to calculate sync.
So instead of calling that function unnecessarily, separate the check
for whether audio/video has been received in to a new function, and only
start applying the interleaved offsets after audio and video have
actually started up and the starting offsets have been calculated.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
When the encoder is set to scale to a different resolution than the obs
output resolution, make sure it uses the current video colorspace and
range by default.
If an encoder did not possess any SEI data, it would never send data at
all because the sent_first_packet wasn't set despite the first packet
being sent.
This Fixes a minor flaw with the API where data had to always be mutable
to be usable by the API.
Functions that do not modify the fundamental underlying data of a
structure should be marked as constant, both for safety and to signify
that the parameter is input only and will not be modified by the
function using it.
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
API functions added:
-----------------------------------------------
obs_output_set_preferred_size
obs_output_get_width
obs_output_get_height
obs_encoder_set_scaled_size
obs_encoder_get_width
obs_encoder_get_height
These functions allow for easier means of setting a custom resolution on
an output or encoder.
If an output uses an encoder and you set the preferred width/height
using the output, then the output will attempt to set the scaled
width/height for the encoder it's currently using.
Outputs and encoders now should use these functions to determine the
width/height of the raw frame data instead of using the video-io
functions.
With the recent change to module handling by BtbN, I felt that having
this information might be useful in case someone is actually using make
install to set up their libraries.
The locale parameter was a mistake, because it puts extra needless
burden upon the module developer to have to handle this variable for
each and every single callback function. The parameter is being removed
in favor of a single centralized module callback function that
specifically updates locale information for a module only when needed.
The 'initialize' callback is used before the encoders/output start up so
it can adjust encoder settings to required values if needed.
Also added the function 'obs_encoder_active' that returns true or false
depending on whether that encoder is active or not.
- Updated the services API so that it links up with an output and
the output gets data from that service rather than via settings.
This allows the service context to have control over how an output is
used, and makes it so that the URL/key/etc isn't necessarily some
static setting.
Also, if the service is attached to an output, it will stick around
until the output is destroyed.
- The settings interface has been updated so that it can allow the
usage of service plugins. What this means is that now you can create
a service plugin that can control aspects of the stream, and it
allows each service to create their own user interface if they create
a service plugin module.
- Testing out saving of current service information. Saves/loads from
JSON in to obs_data_t, seems to be working quite nicely, and the
service object information is saved/preserved on exit, and loaded
again on startup.
- I agonized over the settings user interface for days, and eventually
I just decided that the only way that users weren't going to be
fumbling over options was to split up the settings in to simple/basic
output, pre-configured, and then advanced for advanced use (such as
multiple outputs or services, which I'll implement later).
This was particularly painful to really design right, I wanted more
features and wanted to include everything in one interface but
ultimately just realized from experience that users are just not
technically knowledgable about it and will end up fumbling with the
settings rather than getting things done.
Basically, what this means is that casual users only have to enter in
about 3 things to configure their stream: Stream key, audio bitrate,
and video bitrate. I am really happy with this interface for those
types of users, but it definitely won't be sufficient for advanced
usage or for custom outputs, so that stuff will have to be separated.
- Improved the JSON usage for the 'common streaming services' context,
I realized that JSON arrays are there to ensure sorting, while
forgetting that general items are optimized for hashing. So
basically I'm just using arrays now to sort items in it.
Add API for streaming services. The services API simplifies the
creation of custom service features and user interface.
Custom streaming services later on will be able to do things such as:
- Be able to use service-specific APIs via modules, allowing a more
direct means of communicating with the service and requesting or
setting service-specific information
- Get URL/stream key via other means of authentication such as OAuth,
or be able to build custom URLs for services that require that sort
of thing.
- Query information (such as viewer count, chat, follower
notifications, and other information)
- Set channel information (such as current game, current channel title,
activating commercials)
Also, I reduce some repeated code that was used for all libobs objects.
This includes the name of the object, the private data, settings, as
well as the signal and procedure handlers.
I also switched to using linked lists for the global object lists,
rather than using an array of pointers (you could say it was..
pointless.) ..Anyway, the linked list info is also stored in the shared
context data structure.
jp9000
Christoph Hohmann
Palana