jp9000
/
obs-studio
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
obs-studio/libobs/obs-encoder.h

225 lines
7.1 KiB
C
Raw Normal View History

Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
/******************************************************************************
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
Copyright (C) 2013-2014 by Hugh Bailey <obs.jim@gmail.com>
Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
******************************************************************************/
#pragma once
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/** Specifies the encoder type */
enum obs_encoder_type {
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
OBS_ENCODER_AUDIO,
OBS_ENCODER_VIDEO
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
};
/** Encoder output packet */
struct encoder_packet {
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
uint8_t *data; /**< Packet data */
size_t size; /**< Packet size */
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
int64_t pts; /**< Presentation timestamp */
int64_t dts; /**< Decode timestamp */
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
int32_t timebase_num; /**< Timebase numerator */
int32_t timebase_den; /**< Timebase denominator */
enum obs_encoder_type type; /**< Encoder type */
Improve properties API Improve the properties API so that it can actually respond somewhat to user input. Maybe later this might be further improved or replaced with something script-based. When creating a property, you can now add a callback to that property that notifies when the property has been changed in the user interface. Return true if you want the properties to be refreshed, or false if not. Though now that I think about it I doubt there would ever be a case where you would have this callback and *not* refresh the properties. Regardless, this allows functions to change the values of properties or settings, or enable/disable/hide other property controls from view dynamically.
2014-04-04 00:30:37 -07:00
bool keyframe; /**< Is a keyframe */
Add preliminary FLV/RTMP output (incomplete) - obs-outputs module: Add preliminary code to send out data, and add an FLV muxer. This time we don't really need to build the packets ourselves, we can just use the FLV muxer and send it directly to RTMP_Write and it should automatically parse the entire stream for us without us having to do much manual code at all. We'll see how it goes. - libobs: Add AVC NAL packet parsing code - libobs/media-io: Add quick helper functions for audio/video to get the width/height/fps/samplerate/etc rather than having to query the info structures each time. - libobs (obs-output.c): Change 'connect' signal to 'start' and 'stop' signals. 'start' now specifies an error code rather than whether it simply failed, that way the client can actually know *why* a failure occurred. Added those error codes to obs-defs.h. - libobs: Add a few functions to duplicate/free encoder packets
2014-04-01 11:55:18 -07:00
/* ---------------------------------------------------------------- */
/* Internal video variables (will be parsed automatically) */
Fix issue when using multiple video encoders - Fix an issue that could occur when using more than one video encoder. Audio/video would not sync up correctly because they were expected to be paired with a particular encoder. This simply adds a little helper variable to encoder packets that specifies the system time in microseconds. We then use that system time to sync - Fix an issue with x264 with fractional FPS rates (29.97 and 59.94 particularly) where it would create ridiculously large stream outputs. The problem was that you shouldn't set the timebase_* variables in the x264 params manually, let x264 handle the default values for it and leave them at 0. - Make x264 use CFR output, because there's no reason to ever use VFR in this case.
2014-04-10 11:59:42 -07:00
/* DTS in microseconds */
int64_t dts_usec;
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Packet priority
*
* This is generally use by video encoders to specify the priority
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
* of the packet.
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
*/
int priority;
/**
* Dropped packet priority
*
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
* If this packet needs to be dropped, the next packet must be of this
* priority or higher to continue transmission.
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
*/
int drop_priority;
};
/** Encoder input frame */
struct encoder_frame {
/** Data for the frame/audio */
uint8_t *data[MAX_AV_PLANES];
/** size of each plane */
uint32_t linesize[MAX_AV_PLANES];
/** Number of frames (audio only) */
uint32_t frames;
/** Presentation timestamp */
int64_t pts;
};
/**
* Encoder interface
*
* Encoders have a limited usage with OBS. You are not generally supposed to
* implement every encoder out there. Generally, these are limited or specific
* encoders for h264/aac for streaming and recording. It doesn't have to be
* *just* h264 or aac of course, but generally those are the expected encoders.
*
* That being said, other encoders will be kept in mind for future use.
*/
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
struct obs_encoder_info {
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/* ----------------------------------------------------------------- */
/* Required implementation*/
/** Specifies the named identifier of this encoder */
Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
const char *id;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
/** Specifies the encoder type (video or audio) */
enum obs_encoder_type type;
/** Specifies the codec */
const char *codec;
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Gets the full translated name of this encoder
*
* @return Translated name of the encoder
*/
(API Change) Unsquish libobs API callback names Renamed: To: ------------------------------------------------------- obs_source_info::getname obs_source_info::get_name obs_source_info::getwidth obs_source_info::get_width obs_source_info::getheight obs_source_info::get_height obs_output_info::getname obs_output_info::get_name obs_encoder_info::getname obs_encoder_info::get_name obs_service_info::getname obs_service_info::get_name
2014-08-04 14:38:26 -07:00
const char *(*get_name)(void);
Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Creates the encoder with the specified settings
*
* @param settings Settings for the encoder
* @param encoder OBS encoder context
Add packet interleaving and improve encoder API - Add interleaving of video/audio packets for outputs that are encoded and expect both video and audio data, sorting the packets and sending them to the output when both video and audio is received. - Combine create and initialize callbacks for the encoder API callback interface.
2014-04-04 23:21:19 -07:00
* @return Data associated with this encoder context, or
* NULL if initialization failed.
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
*/
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
void *(*create)(obs_data_t settings, obs_encoder_t encoder);
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Destroys the encoder data
*
* @param data Data associated with this encoder context
*/
Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
void (*destroy)(void *data);
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Encodes frame(s), and outputs encoded packets as they become
* available.
*
* @param data Data associated with this encoder
* context
* @param[in] frame Raw audio/video data to encode
* @param[out] packet Encoder packet output, if any
* @param[out] received_packet Set to true if a packet was received,
* false otherwise
* @return true if successful, false otherwise.
*/
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
bool (*encode)(void *data, struct encoder_frame *frame,
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
struct encoder_packet *packet, bool *received_packet);
Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
/** Audio encoder only: Returns the frame size for this encoder */
size_t (*frame_size)(void *data);
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/* ----------------------------------------------------------------- */
/* Optional implementation */
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
Add a way to get default settings - Implement a means of obtaining default settings for an input/output/encoder. obs_source_defaults for example will return the default settings for a particular source type. - Because C++ doesn't have designated initializers, use functions in the WASAPI plugin to register the sources instead.
2014-03-07 05:55:21 -08:00
/**
* Gets the default settings for this encoder
*
* @param[out] settings Data to assign default settings to
*/
void (*defaults)(obs_data_t settings);
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Gets the property information of this encoder
*
* @return The properties data
*/
Remove 'locale' parameter from all callbacks The locale parameter was a mistake, because it puts extra needless burden upon the module developer to have to handle this variable for each and every single callback function. The parameter is being removed in favor of a single centralized module callback function that specifically updates locale information for a module only when needed.
2014-06-25 00:13:00 -07:00
obs_properties_t (*properties)(void);
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
* Updates the settings for this encoder (usually used for things like
* changeing birate while active)
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
*
* @param data Data associated with this encoder context
* @param settings New settings for this encoder
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
* @return true if successful, false otherwise
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
*/
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
bool (*update)(void *data, obs_data_t settings);
Add property list callbacks - Add property list callbacks to sources/outputs/encoders so that if necessary user interface can be automatically generated or perhaps a property list widget can be used for them. - Change some of the property API names. obs_property_list_t felt a bit awkward when actually using it, so I just renamed it to obs_properties_t. - Removed the getdata/setdata nad getparam/setparam functions from sources/services, they will be superseded by the dynamic procedure call API.
2014-02-01 21:46:13 -08:00
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Returns extra data associated with this encoder (usually header)
*
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
* @param data Data associated with this encoder context
* @param[out] extra_data Pointer to receive the extra data
* @param[out] size Pointer to receive the size of the extra
* data
* @return true if extra data available, false
* otherwise
*/
bool (*extra_data)(void *data, uint8_t **extra_data, size_t *size);
/**
* Gets the SEI data, if any
*
* @param data Data associated with this encoder context
* @param[out] sei_data Pointer to receive the SEI data
* @param[out] size Pointer to receive the SEI data size
* @return true if SEI data available, false otherwise
*/
bool (*sei_data)(void *data, uint8_t **sei_data, size_t *size);
/**
* Returns desired audio format and sample information
*
* @param data Data associated with this encoder context
* @param[out] info Audio format information
* @return true if specific format is desired, false
* otherwise
*/
bool (*audio_info)(void *data, struct audio_convert_info *info);
/**
* Returns desired video format information
*
* @param data Data associated with this encoder context
* @param[out] info Video format information
* @return true if specific format is desired, false
* otherwise
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
*/
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
bool (*video_info)(void *data, struct video_scale_info *info);
Add preliminary output/encoder interface - First, I redid the output interface for libobs. I feel like it's going in a pretty good direction in terms of design. Right now, the design is so that outputs and encoders are separate. One or more outputs can connect to a specific encoder to receive its data, or the output can connect directly to raw data from libobs output itself, if the output doesn't want to use a designated encoder. Data is received via callbacks set when you connect to the encoder or raw output. Multiple outputs can receive the data from a single encoder context if need be (such as for streaming to multiple channels at once, and/or recording with the same data). When an encoder is first connected to, it will connect to raw output, and start encoding. Additional connections will receive that same data being encoded as well after that. When the last encoder has disconnected, it will stop encoding. If for some reason the encoder needs to stop, it will use the callback with NULL to signal that encoding has stopped. Some of these things may be subject to change in the future, though it feels pretty good with this design so far. Will have to see how well it works out in practice versus theory. - Second, Started adding preliminary RTMP/x264 output plugin code. To speed things up, I might just make a direct raw->FFmpeg output to create a quick output plugin that we can start using for testing all the subsystems.
2014-01-16 21:34:51 -08:00
};
Remove the weird size stuff from OBS_DECLARE_MODULE Instead of doing this, just use macros to handle this situation. Also, fix a minor bug in AAC encoder
2014-04-05 01:43:59 -07:00
EXPORT void obs_register_encoder_s(const struct obs_encoder_info *info,
size_t size);
Remove majority of warnings There were a *lot* of warnings, managed to remove most of them. Also, put warning flags before C_FLAGS and CXX_FLAGS, rather than after, as -Wall -Wextra was overwriting flags that came before it.
2014-02-14 14:13:36 -08:00
/**
* Register an encoder definition to the current obs context. This should be
* used in obs_module_load.
*
* @param info Pointer to the source definition structure.
*/
Remove the weird size stuff from OBS_DECLARE_MODULE Instead of doing this, just use macros to handle this situation. Also, fix a minor bug in AAC encoder
2014-04-05 01:43:59 -07:00
#define obs_register_encoder(info) \
obs_register_encoder_s(info, sizeof(struct obs_encoder_info))