2014-08-15 21:52:18 -07:00
# Note to translators: *DO NOT* translate this file directly. Instead, visit http://crowdin.com/project/obs-studio and submit your translations there.
2019-03-18 15:18:03 -07:00
# Pull requests for translations outside of Crowdin will not be accepted.
2014-07-27 01:47:59 -07:00
# Read this forum post for more instructions on submitting translations: https://obsproject.com/forum/threads/how-to-contribute-translations-for-obs.16327/
2014-05-10 18:47:48 -07:00
# Language and language region of this file
2013-12-18 09:08:31 -08:00
Language = "English"
2014-05-10 18:47:48 -07:00
Region = "United States"
# commonly shared locale
OK = "OK"
Apply = "Apply"
Cancel = "Cancel"
2015-03-21 23:07:40 -07:00
Close = "Close"
2015-02-11 05:47:05 -08:00
Save = "Save"
Discard = "Discard"
2016-03-15 20:55:40 -07:00
Disable = "Disable"
2014-05-10 18:47:48 -07:00
Yes = "Yes"
No = "No"
Add = "Add"
Remove = "Remove"
2014-06-30 01:13:32 -07:00
Rename = "Rename"
2015-03-21 23:07:40 -07:00
Interact = "Interact"
2015-02-25 21:23:57 -08:00
Filters = "Filters"
2014-05-10 18:47:48 -07:00
Properties = "Properties"
MoveUp = "Move Up"
MoveDown = "Move Down"
2013-12-10 10:22:09 -08:00
Settings = "Settings"
2015-04-04 01:40:15 -07:00
Display = "Display"
2015-01-26 13:41:22 -08:00
Name = "Name"
2014-05-10 18:47:48 -07:00
Exit = "Exit"
2019-08-10 00:27:02 -07:00
Mixer = "Audio Mixer"
2014-05-10 18:47:48 -07:00
Browse = "Browse"
Mono = "Mono"
Stereo = "Stereo"
2014-07-06 16:19:27 -07:00
DroppedFrames = "Dropped Frames %1 (%2%)"
2017-11-08 19:38:44 -08:00
StudioProgramProjector = "Fullscreen Projector (Program)"
2015-04-04 01:40:15 -07:00
PreviewProjector = "Fullscreen Projector (Preview)"
SceneProjector = "Fullscreen Projector (Scene)"
SourceProjector = "Fullscreen Projector (Source)"
2017-11-08 19:38:44 -08:00
StudioProgramWindow = "Windowed Projector (Program)"
2017-03-01 20:08:49 -08:00
PreviewWindow = "Windowed Projector (Preview)"
SceneWindow = "Windowed Projector (Scene)"
SourceWindow = "Windowed Projector (Source)"
2017-12-02 16:11:04 -08:00
MultiviewProjector = "Multiview (Fullscreen)"
MultiviewWindowed = "Multiview (Windowed)"
2014-11-01 13:44:01 -07:00
Clear = "Clear"
Revert = "Revert"
2015-05-24 22:24:26 -07:00
Show = "Show"
2015-07-06 04:21:11 -07:00
Hide = "Hide"
2017-09-13 21:10:45 -07:00
UnhideAll = "Unhide All"
2015-06-23 19:20:37 -07:00
Untitled = "Untitled"
New = "New"
Duplicate = "Duplicate"
2015-09-06 16:12:03 -07:00
Enable = "Enable"
2016-01-25 17:09:59 -08:00
DisableOSXVSync = "Disable OSX V-Sync"
ResetOSXVSyncOnExit = "Reset OSX V-Sync on Exit"
2019-04-08 07:02:32 -07:00
HighResourceUsage = "Encoding overloaded! Consider turning down video settings or using a faster encoding preset."
UI: Implement transitions and preview/program mode
Implements transitions, and introduces "Studio Mode" which allows live
editing of the same or different scenes while preserving what's
currently being displayed.
Studio Mode offers a number of new features:
- The ability to edit different scenes or the same scene without
modifying what's currently being displayed (of course)
- The ability to set up "quick transitions" with a desired transition
and duration that can be assigned hotkeys
- The option to create full copies of all sources in the program scene
to allow editing of source properties of the same scene live without
modifying the output, or (by default) just use references. (Note
however that certain sources cannot be duplicated, such as capture
sources, media sources, and device sources)
- Swap Mode (enabled by default) which swaps the program scene with
the preview scene when a transition completes
Currently, only non-configurable transitions (transitions without
properties) are listed, and the only transitions available as of this
writing are fade and cut. In future versions more transitions will be
added, such as swipe, stingers, and many other various sort of
transitions, and the UI will support being able to add/configure/remove
those sort of configurable transitions.
2016-01-23 11:19:29 -08:00
Transition = "Transition"
QuickTransitions = "Quick Transitions"
2019-10-23 14:11:14 -07:00
FadeToBlack = "Fade to Black"
2016-03-31 10:12:13 -07:00
Left = "Left"
Right = "Right"
Top = "Top"
Bottom = "Bottom"
2016-09-05 20:42:17 -07:00
Reset = "Reset"
2016-09-21 01:51:18 -07:00
Hours = "Hours"
Minutes = "Minutes"
Seconds = "Seconds"
2016-11-03 12:28:33 -07:00
Deprecated = "Deprecated"
2016-12-07 05:21:44 -08:00
ReplayBuffer = "Replay Buffer"
2016-12-08 15:09:22 -08:00
Import = "Import"
Export = "Export"
2017-03-25 04:19:29 -07:00
Copy = "Copy"
Paste = "Paste"
PasteReference = "Paste (Reference)"
PasteDuplicate = "Paste (Duplicate)"
2017-04-08 23:31:29 -07:00
RemuxRecordings = "Remux Recordings"
2017-05-13 13:01:56 -07:00
Next = "Next"
Back = "Back"
2017-04-09 03:39:53 -07:00
Defaults = "Defaults"
2017-09-13 21:10:45 -07:00
HideMixer = "Hide in Mixer"
2017-11-30 05:05:50 -08:00
TransitionOverride = "Transition Override"
None = "None"
2017-10-21 10:51:01 -07:00
StudioMode.Preview = "Preview"
StudioMode.Program = "Program"
ShowInMultiview = "Show in Multiview"
2018-04-27 19:49:48 -07:00
VerticalLayout = "Vertical Layout"
2018-06-02 09:45:01 -07:00
Group = "Group"
2019-03-05 15:16:16 -08:00
DoNotShowAgain = "Do not show again"
2019-03-29 02:16:12 -07:00
Default = "(Default)"
2019-03-13 03:27:36 -07:00
Calculating = "Calculating..."
2019-10-07 22:43:10 -07:00
Fullscreen = "Fullscreen"
Windowed = "Windowed"
2019-09-12 00:13:19 -07:00
Percent = "Percent"
2020-01-08 22:03:22 -08:00
AspectRatio = "Aspect Ratio <b>%1:%2</b>"
2017-03-25 04:19:29 -07:00
2017-05-14 15:25:34 -07:00
# warning if program already open
AlreadyRunning.Title = "OBS is already running"
2019-04-08 07:02:32 -07:00
AlreadyRunning.Text = "OBS is already running! Unless you meant to do this, please shut down any existing instances of OBS before trying to run a new instance. If you have OBS set to minimize to the system tray, please check to see if it's still running there."
2017-05-14 15:25:34 -07:00
AlreadyRunning.LaunchAnyway = "Launch Anyway"
2019-04-08 07:02:32 -07:00
# warning when closing docks. it's frustrating that we actually need this.
2019-03-05 14:37:01 -08:00
DockCloseWarning.Title = "Closing Dockable Window"
DockCloseWarning.Text = "You just closed a dockable window. If you'd like to show it again, use the View → Docks menu on the menu bar."
2019-08-08 03:27:45 -07:00
# extra browser panels dialog
ExtraBrowsers = "Custom Browser Docks"
2019-08-16 05:06:08 -07:00
ExtraBrowsers.Info = "Add docks by giving them a name and URL, then click Apply or Close to open the docks. You can add or remove docks at any time."
2019-08-08 03:27:45 -07:00
ExtraBrowsers.DockName = "Dock Name"
2019-02-06 22:24:25 -08:00
# Auth
2019-02-12 09:34:46 -08:00
Auth.Authing.Title = "Authenticating..."
Auth.Authing.Text = "Authenticating with %1, please wait..."
2019-02-06 22:24:25 -08:00
Auth.AuthFailure.Title = "Authentication Failure"
Auth.AuthFailure.Text = "Failed to authenticate with %1:\n\n%2: %3"
Auth.InvalidScope.Title = "Authentication Required"
2019-04-08 07:02:32 -07:00
Auth.InvalidScope.Text = "The authentication requirements for %1 have changed. Some features may not be available."
2019-02-12 09:34:46 -08:00
Auth.LoadingChannel.Title = "Loading channel information..."
Auth.LoadingChannel.Text = "Loading channel information for %1, please wait..."
2019-02-06 22:24:25 -08:00
Auth.ChannelFailure.Title = "Failed to load channel"
Auth.ChannelFailure.Text = "Failed to load channel information for %1\n\n%2: %3"
2019-02-06 22:44:28 -08:00
Auth.Chat = "Chat"
2019-02-06 22:45:06 -08:00
Auth.StreamInfo = "Stream Information"
TwitchAuth.Stats = "Twitch Stats"
2019-03-06 14:26:12 -08:00
TwitchAuth.Feed = "Twitch Activity Feed"
2019-05-31 21:00:48 -07:00
TwitchAuth.TwoFactorFail.Title = "Could not query stream key"
2019-06-03 09:24:28 -07:00
TwitchAuth.TwoFactorFail.Text = "OBS was unable to connect to your Twitch account. Please make sure two-factor authentication is set up in your <a href='https://www.twitch.tv/settings/security'>Twitch security settings</a> as this is required to stream."
2019-07-16 05:14:22 -07:00
RestreamAuth.Channels = "Restream Channels"
2019-02-06 22:24:25 -08:00
2017-03-25 04:19:29 -07:00
# copy filters
Copy.Filters = "Copy Filters"
Paste.Filters = "Paste Filters"
UI: Implement transitions and preview/program mode
Implements transitions, and introduces "Studio Mode" which allows live
editing of the same or different scenes while preserving what's
currently being displayed.
Studio Mode offers a number of new features:
- The ability to edit different scenes or the same scene without
modifying what's currently being displayed (of course)
- The ability to set up "quick transitions" with a desired transition
and duration that can be assigned hotkeys
- The option to create full copies of all sources in the program scene
to allow editing of source properties of the same scene live without
modifying the output, or (by default) just use references. (Note
however that certain sources cannot be duplicated, such as capture
sources, media sources, and device sources)
- Swap Mode (enabled by default) which swaps the program scene with
the preview scene when a transition completes
Currently, only non-configurable transitions (transitions without
properties) are listed, and the only transitions available as of this
writing are fade and cut. In future versions more transitions will be
added, such as swipe, stingers, and many other various sort of
transitions, and the UI will support being able to add/configure/remove
those sort of configurable transitions.
2016-01-23 11:19:29 -08:00
2019-02-06 22:16:39 -08:00
# browser initialization dialog
2019-02-12 09:34:46 -08:00
BrowserPanelInit.Title = "Initializing Browser..."
BrowserPanelInit.Text = "Initializing browser, please wait..."
2019-02-06 22:16:39 -08:00
2017-05-06 12:13:56 -07:00
# bandwidth test
BandwidthTest.Region = "Region"
BandwidthTest.Region.US = "United States"
BandwidthTest.Region.EU = "Europe"
BandwidthTest.Region.Asia = "Asia"
BandwidthTest.Region.Other = "Other"
# first time startup
2019-04-08 07:02:32 -07:00
Basic.FirstStartup.RunWizard = "Would you like to run the auto-configuration wizard? You can also manually configure your settings by clicking the Settings button in the main window."
2017-05-06 12:13:56 -07:00
Basic.FirstStartup.RunWizard.NoClicked = "If you change your mind, you can run the auto-configuration wizard any time again from the Tools menu."
# auto config wizard
Basic.AutoConfig = "Auto-Configuration Wizard"
Basic.AutoConfig.ApplySettings = "Apply Settings"
Basic.AutoConfig.StartPage = "Usage Information"
2017-05-13 13:01:56 -07:00
Basic.AutoConfig.StartPage.SubTitle = "Specify what you want to use the program for"
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.StartPage.PrioritizeStreaming = "Optimize for streaming, recording is secondary"
Basic.AutoConfig.StartPage.PrioritizeRecording = "Optimize just for recording, I will not be streaming"
Basic.AutoConfig.VideoPage = "Video Settings"
Basic.AutoConfig.VideoPage.SubTitle = "Specify the desired video settings you would like to use"
Basic.AutoConfig.VideoPage.BaseResolution.UseCurrent = "Use Current (%1x%2)"
Basic.AutoConfig.VideoPage.BaseResolution.Display = "Display %1 (%2x%3)"
Basic.AutoConfig.VideoPage.FPS.UseCurrent = "Use Current (%1)"
Basic.AutoConfig.VideoPage.FPS.PreferHighFPS = "Either 60 or 30, but prefer 60 when possible"
Basic.AutoConfig.VideoPage.FPS.PreferHighRes = "Either 60 or 30, but prefer high resolution"
2019-04-08 07:02:32 -07:00
Basic.AutoConfig.VideoPage.CanvasExplanation = "Note: The canvas (base) resolution is not necessarily the same as the resolution you will stream or record with. Your actual stream/recording resolution may be scaled down from the canvas resolution to reduce resource usage or bitrate requirements."
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.StreamPage = "Stream Information"
Basic.AutoConfig.StreamPage.SubTitle = "Please enter your stream information"
2019-08-14 15:25:35 -07:00
Basic.AutoConfig.StreamPage.ConnectAccount = "Connect Account (recommended)"
2019-02-06 22:37:36 -08:00
Basic.AutoConfig.StreamPage.DisconnectAccount = "Disconnect Account"
Basic.AutoConfig.StreamPage.DisconnectAccount.Confirm.Title = "Disconnect Account?"
2019-04-08 07:02:32 -07:00
Basic.AutoConfig.StreamPage.DisconnectAccount.Confirm.Text = "This change will apply immediately. Are you sure you want to disconnect your account?"
2019-10-24 21:05:43 -07:00
Basic.AutoConfig.StreamPage.GetStreamKey = "Get Stream Key"
2019-02-06 22:37:36 -08:00
Basic.AutoConfig.StreamPage.UseStreamKey = "Use Stream Key"
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.StreamPage.Service = "Service"
Basic.AutoConfig.StreamPage.Service.ShowAll = "Show All..."
2019-02-06 19:19:17 -08:00
Basic.AutoConfig.StreamPage.Service.Custom = "Custom..."
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.StreamPage.Server = "Server"
Basic.AutoConfig.StreamPage.StreamKey = "Stream Key"
Basic.AutoConfig.StreamPage.StreamKey.LinkToSite = "(Link)"
Basic.AutoConfig.StreamPage.PerformBandwidthTest = "Estimate bitrate with bandwidth test (may take a few minutes)"
Basic.AutoConfig.StreamPage.PreferHardwareEncoding = "Prefer hardware encoding"
Basic.AutoConfig.StreamPage.PreferHardwareEncoding.ToolTip = "Hardware Encoding eliminates most CPU usage, but may require more bitrate to obtain the same level of quality."
Basic.AutoConfig.StreamPage.StreamWarning.Title = "Stream warning"
2019-04-08 07:02:32 -07:00
Basic.AutoConfig.StreamPage.StreamWarning.Text = "The bandwidth test is about to stream randomized video data without audio to your channel. If you're able, it's recommended to temporarily turn off saving videos of streams and set the stream to private until after the test has completed. Continue?"
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.TestPage = "Final Results"
Basic.AutoConfig.TestPage.SubTitle.Testing = "The program is now executing a set of tests to estimate the most ideal settings"
Basic.AutoConfig.TestPage.SubTitle.Complete = "Testing complete"
Basic.AutoConfig.TestPage.TestingBandwidth = "Performing bandwidth test, this may take a few minutes..."
2019-04-08 07:02:32 -07:00
Basic.AutoConfig.TestPage.TestingBandwidth.Connecting = "Connecting to: %1..."
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.TestPage.TestingBandwidth.ConnectFailed = "Failed to connect to any servers, please check your internet connection and try again."
2019-04-08 07:02:32 -07:00
Basic.AutoConfig.TestPage.TestingBandwidth.Server = "Testing bandwidth for: %1"
2017-05-06 12:13:56 -07:00
Basic.AutoConfig.TestPage.TestingStreamEncoder = "Testing stream encoder, this may take a minute..."
Basic.AutoConfig.TestPage.TestingRecordingEncoder = "Testing recording encoder, this may take a minute..."
Basic.AutoConfig.TestPage.TestingRes = "Testing resolutions, this may take a few minutes..."
Basic.AutoConfig.TestPage.TestingRes.Fail = "Failed to start up encoder"
Basic.AutoConfig.TestPage.TestingRes.Resolution = "Testing %1x%2 %3 FPS..."
Basic.AutoConfig.TestPage.Result.StreamingEncoder = "Streaming Encoder"
Basic.AutoConfig.TestPage.Result.RecordingEncoder = "Recording Encoder"
Basic.AutoConfig.TestPage.Result.Header = "The program has determined that these estimated settings are the most ideal for you:"
2019-04-08 07:02:32 -07:00
Basic.AutoConfig.TestPage.Result.Footer = "To use these settings, click Apply Settings. To reconfigure the wizard and try again, click Back. To manually configure settings yourself, click Cancel and open Settings."
2017-05-06 12:13:56 -07:00
2017-05-10 19:37:45 -07:00
# stats
Basic.Stats = "Stats"
Basic.Stats.CPUUsage = "CPU Usage"
2019-03-09 01:25:01 -08:00
Basic.Stats.HDDSpaceAvailable = "Disk space available"
2017-05-10 19:37:45 -07:00
Basic.Stats.MemoryUsage = "Memory Usage"
Basic.Stats.AverageTimeToRender = "Average time to render frame"
2017-05-13 13:01:56 -07:00
Basic.Stats.SkippedFrames = "Skipped frames due to encoding lag"
2017-05-10 19:37:45 -07:00
Basic.Stats.MissedFrames = "Frames missed due to rendering lag"
Basic.Stats.Output.Stream = "Stream"
Basic.Stats.Output.Recording = "Recording"
Basic.Stats.Status = "Status"
Basic.Stats.Status.Recording = "Recording"
Basic.Stats.Status.Live = "LIVE"
Basic.Stats.Status.Reconnecting = "Reconnecting"
Basic.Stats.Status.Inactive = "Inactive"
2019-12-27 10:59:19 -08:00
Basic.Stats.Status.Active = "Active"
2017-05-10 19:37:45 -07:00
Basic.Stats.DroppedFrames = "Dropped Frames (Network)"
Basic.Stats.MegabytesSent = "Total Data Output"
Basic.Stats.Bitrate = "Bitrate"
2019-03-13 03:27:36 -07:00
Basic.Stats.DiskFullIn = "Disk full in (approx.)"
2019-10-15 21:20:35 -07:00
Basic.Stats.ResetStats = "Reset Stats"
2017-05-10 19:37:45 -07:00
2019-02-06 13:57:59 -08:00
ResetUIWarning.Title = "Are you sure you want to reset the UI?"
2019-04-08 07:02:32 -07:00
ResetUIWarning.Text = "Resetting the UI will hide additional docks. You will need to unhide these docks from the view menu if you want them to be visible.\n\nAre you sure you want to reset the UI?"
2019-02-06 13:57:59 -08:00
2017-02-20 04:46:29 -08:00
# updater
Updater.Title = "New update available"
Updater.Text = "There is a new update available:"
Updater.UpdateNow = "Update Now"
Updater.RemindMeLater = "Remind me Later"
Updater.Skip = "Skip Version"
Updater.Running.Title = "Program currently active"
Updater.Running.Text = "Outputs are currently active, please shut down any active outputs before attempting to update"
Updater.NoUpdatesAvailable.Title = "No updates available"
Updater.NoUpdatesAvailable.Text = "No updates are currently available"
Updater.FailedToLaunch = "Failed to launch updater"
Updater.GameCaptureActive.Title = "Game capture active"
2019-04-18 20:38:21 -07:00
Updater.GameCaptureActive.Text = "Game capture hook library is currently in use. Please close any games/programs being captured (or restart Windows) and try again."
2017-02-20 04:46:29 -08:00
UI: Implement transitions and preview/program mode
Implements transitions, and introduces "Studio Mode" which allows live
editing of the same or different scenes while preserving what's
currently being displayed.
Studio Mode offers a number of new features:
- The ability to edit different scenes or the same scene without
modifying what's currently being displayed (of course)
- The ability to set up "quick transitions" with a desired transition
and duration that can be assigned hotkeys
- The option to create full copies of all sources in the program scene
to allow editing of source properties of the same scene live without
modifying the output, or (by default) just use references. (Note
however that certain sources cannot be duplicated, such as capture
sources, media sources, and device sources)
- Swap Mode (enabled by default) which swaps the program scene with
the preview scene when a transition completes
Currently, only non-configurable transitions (transitions without
properties) are listed, and the only transitions available as of this
writing are fade and cut. In future versions more transitions will be
added, such as swipe, stingers, and many other various sort of
transitions, and the UI will support being able to add/configure/remove
those sort of configurable transitions.
2016-01-23 11:19:29 -08:00
# quick transitions
QuickTransitions.SwapScenes = "Swap Preview/Output Scenes After Transitioning"
QuickTransitions.SwapScenesTT = "Swaps the preview and output scenes after transitioning (if the output's original scene still exists).\nThis will not undo any changes that may have been made to the output's original scene."
QuickTransitions.DuplicateScene = "Duplicate Scene"
QuickTransitions.DuplicateSceneTT = "When editing the same scene, allows editing transform/visibility of sources without modifying the output.\nTo edit properties of sources without modifying the output, enable 'Duplicate Sources'.\nChanging this value will reset the current output scene (if it still exists)."
QuickTransitions.EditProperties = "Duplicate Sources"
QuickTransitions.EditPropertiesTT = "When editing the same scene, allows editing properties of sources without modifying the output.\nThis can only be used if 'Duplicate Scene' is enabled.\nCertain sources (such as capture or media sources) do not support this and cannot be edited separately.\nChanging this value will reset the current output scene (if it still exists).\n\nWarning: Because sources will be duplicated, this may require extra system or video resources."
QuickTransitions.HotkeyName = "Quick Transition: %1"
# transitions
2016-02-27 02:50:04 -08:00
Basic.AddTransition = "Add Configurable Transition"
Basic.RemoveTransition = "Remove Configurable Transition"
Basic.TransitionProperties = "Transition Properties"
UI: Implement transitions and preview/program mode
Implements transitions, and introduces "Studio Mode" which allows live
editing of the same or different scenes while preserving what's
currently being displayed.
Studio Mode offers a number of new features:
- The ability to edit different scenes or the same scene without
modifying what's currently being displayed (of course)
- The ability to set up "quick transitions" with a desired transition
and duration that can be assigned hotkeys
- The option to create full copies of all sources in the program scene
to allow editing of source properties of the same scene live without
modifying the output, or (by default) just use references. (Note
however that certain sources cannot be duplicated, such as capture
sources, media sources, and device sources)
- Swap Mode (enabled by default) which swaps the program scene with
the preview scene when a transition completes
Currently, only non-configurable transitions (transitions without
properties) are listed, and the only transitions available as of this
writing are fade and cut. In future versions more transitions will be
added, such as swipe, stingers, and many other various sort of
transitions, and the UI will support being able to add/configure/remove
those sort of configurable transitions.
2016-01-23 11:19:29 -08:00
Basic.SceneTransitions = "Scene Transitions"
Basic.TransitionDuration = "Duration"
Basic.TogglePreviewProgramMode = "Studio Mode"
2014-05-10 18:47:48 -07:00
2016-02-27 02:50:04 -08:00
# transition name dialog
TransitionNameDlg.Text = "Please enter the name of the transition"
TransitionNameDlg.Title = "Transition Name"
2015-06-23 19:29:07 -07:00
# title bar strings
2015-06-23 19:38:01 -07:00
TitleBar.Profile = "Profile"
2015-06-23 19:29:07 -07:00
TitleBar.Scenes = "Scenes"
2014-05-10 18:47:48 -07:00
# "name already exists" dialog box
NameExists.Title = "Name already exists"
NameExists.Text = "The name is already in use."
2014-08-12 12:09:19 -07:00
NoNameEntered.Title = "Please enter a valid name"
NoNameEntered.Text = "You cannot use empty names."
2014-05-10 18:47:48 -07:00
2016-01-22 08:09:04 -08:00
# confirm start stream dialog box
ConfirmStart.Title = "Start Stream?"
ConfirmStart.Text = "Are you sure you want to start the stream?"
# confirm stop stream dialog box
ConfirmStop.Title = "Stop Stream?"
ConfirmStop.Text = "Are you sure you want to stop the stream?"
2019-06-17 07:14:14 -07:00
# confirm stop record dialog box
ConfirmStopRecord.Title = "Stop Recording?"
ConfirmStopRecord.Text = "Are you sure you want to stop recording?"
2019-03-08 21:38:52 -08:00
# confirm bandwidth test dialog box
ConfirmBWTest.Title = "Start Bandwidth Test?"
ConfirmBWTest.Text = "You have OBS configured in bandwidth test mode. This mode allows for network testing without your channel going live. Once you are done testing, you will need to disable it in order for viewers to be able to see your stream.\n\nDo you want to continue?"
2015-02-07 03:39:16 -08:00
# confirm exit dialog box
ConfirmExit.Title = "Exit OBS?"
2019-04-08 07:02:32 -07:00
ConfirmExit.Text = "OBS is currently active. All streams/recordings will be shut down. Are you sure you wish to exit?"
2015-02-07 03:39:16 -08:00
2014-06-30 01:13:32 -07:00
# confirm delete dialog box
ConfirmRemove.Title = "Confirm Remove"
ConfirmRemove.Text = "Are you sure you wish to remove '$1'?"
2016-07-02 15:44:24 -07:00
ConfirmRemove.TextMultiple = "Are you sure you wish to remove %1 items?"
2014-06-30 01:13:32 -07:00
2017-02-03 20:29:09 -08:00
# output start messages
Output.StartStreamFailed = "Failed to start streaming"
Output.StartRecordingFailed = "Failed to start recording"
Output.StartReplayFailed = "Failed to start replay buffer"
2019-04-08 07:02:32 -07:00
Output.StartFailedGeneric = "Starting the output failed. Please check the log for details.\n\nNote: If you are using the NVENC or AMD encoders, make sure your video drivers are up to date."
2017-02-03 20:29:09 -08:00
2019-07-07 15:47:29 -07:00
# replay buffer + pause warning message
Output.ReplayBuffer.PauseWarning.Title = "Cannot save replays while paused"
Output.ReplayBuffer.PauseWarning.Text = "Warning: Replays cannot be saved while recording is paused."
2019-05-17 01:19:36 -07:00
2014-05-12 15:30:36 -07:00
# output connect messages
Output.ConnectFail.Title = "Failed to connect"
2019-04-08 07:02:32 -07:00
Output.ConnectFail.BadPath = "Invalid Path or Connection URL. Please check your settings to confirm that they are valid."
2014-05-12 15:30:36 -07:00
Output.ConnectFail.ConnectFailed = "Failed to connect to server"
2019-04-08 07:02:32 -07:00
Output.ConnectFail.InvalidStream = "Could not access the specified channel or stream key, please double-check your stream key. If it is correct, there may be a problem connecting to the server."
Output.ConnectFail.Error = "An unexpected error occurred when trying to connect to the server. More information in the log file."
2014-05-12 15:30:36 -07:00
Output.ConnectFail.Disconnected = "Disconnected from server."
2019-05-17 01:19:36 -07:00
# output streaming-related messages
Output.StreamEncodeError.Title = "Encoding error"
Output.StreamEncodeError.Msg = "An encoder error occurred while streaming."
2015-06-09 21:00:22 -07:00
# output recording-related messages
Output.RecordFail.Title = "Failed to start recording"
2019-04-08 07:02:32 -07:00
Output.RecordFail.Unsupported = "The output format is either unsupported or does not support more than one audio track. Please check your settings and try again."
2015-09-18 22:20:55 -07:00
Output.RecordNoSpace.Title = "Insufficient disk space"
Output.RecordNoSpace.Msg = "There is not sufficient disk space to continue recording."
Output.RecordError.Title = "Recording error"
Output.RecordError.Msg = "An unspecified error occurred while recording."
2019-05-17 01:19:36 -07:00
Output.RecordError.EncodeErrorMsg = "An encoder error occurred while recording."
2016-12-07 05:21:44 -08:00
Output.ReplayBuffer.NoHotkey.Title = "No hotkey set!"
2019-04-08 07:02:32 -07:00
Output.ReplayBuffer.NoHotkey.Msg = "No save hotkey set for replay buffer. Please set the \"Save\" hotkey to use for saving replay recordings."
2015-06-09 21:00:22 -07:00
2014-05-20 23:27:27 -07:00
# output recording messages
Output.BadPath.Title = "Bad File Path"
2019-04-08 07:02:32 -07:00
Output.BadPath.Text = "The configured file output path is invalid. Please check your settings to confirm that a valid file path has been set."
2014-05-20 23:27:27 -07:00
2014-05-18 17:44:10 -07:00
# log upload dialog text and messages
LogReturnDialog = "Log Upload Successful"
LogReturnDialog.CopyURL = "Copy URL"
LogReturnDialog.ErrorUploadingLog = "Error uploading log file"
2014-09-02 19:11:55 -07:00
# remux dialog
Remux.SourceFile = "OBS Recording"
Remux.TargetFile = "Target File"
Remux.Remux = "Remux"
2019-02-11 08:48:36 -08:00
Remux.Stop = "Stop Remuxing"
2018-01-15 16:26:49 -08:00
Remux.ClearFinished = "Clear Finished Items"
Remux.ClearAll = "Clear All Items"
2016-05-09 14:14:43 -07:00
Remux.OBSRecording = "OBS Recording"
2014-09-02 19:11:55 -07:00
Remux.FinishedTitle = "Remuxing finished"
Remux.Finished = "Recording remuxed"
Remux.FinishedError = "Recording remuxed, but the file may be incomplete"
2019-02-12 09:34:46 -08:00
Remux.SelectRecording = "Select OBS Recording..."
Remux.SelectTarget = "Select target file..."
2018-01-15 16:26:49 -08:00
Remux.FileExistsTitle = "Target files exist"
Remux.FileExists = "The following target files already exist. Do you want to replace them?"
2014-09-02 19:11:55 -07:00
Remux.ExitUnfinishedTitle = "Remuxing in progress"
Remux.ExitUnfinished = "Remuxing is not finished, stopping now may render the target file unusable.\nAre you sure you want to stop remuxing?"
2018-01-15 16:26:49 -08:00
Remux.HelpText = "Drop files in this window to remux, or select an empty \"OBS Recording\" cell to browse for a file."
2014-09-02 19:11:55 -07:00
2014-07-13 23:56:28 -07:00
# update dialog
UpdateAvailable = "New Update Available"
2019-04-08 07:02:32 -07:00
UpdateAvailable.Text = "Version %1.%2.%3 is now available. <a href='%4'>Click here to download</a>"
2014-07-13 23:56:28 -07:00
2014-05-10 18:47:48 -07:00
# audio device names
Basic.DesktopDevice1 = "Desktop Audio"
Basic.DesktopDevice2 = "Desktop Audio 2"
Basic.AuxDevice1 = "Mic/Aux"
Basic.AuxDevice2 = "Mic/Aux 2"
Basic.AuxDevice3 = "Mic/Aux 3"
Basic.AuxDevice4 = "Mic/Aux 4"
# startup scene/capture
Basic.Scene = "Scene"
Basic.DisplayCapture = "Display Capture"
2015-04-02 21:35:46 -07:00
# display context menu
Basic.Main.PreviewConextMenu.Enable = "Enable Preview"
2019-03-04 15:29:37 -08:00
# disable preview
Basic.Main.Preview.Disable = "Disable Preview"
2016-06-29 07:08:02 -07:00
# scale filtering
ScaleFiltering = "Scale Filtering"
ScaleFiltering.Point = "Point"
ScaleFiltering.Bilinear = "Bilinear"
ScaleFiltering.Bicubic = "Bicubic"
ScaleFiltering.Lanczos = "Lanczos"
2019-03-06 20:53:15 -08:00
ScaleFiltering.Area = "Area"
2016-06-29 07:08:02 -07:00
2016-03-15 20:55:40 -07:00
# deinterlacing
Deinterlacing = "Deinterlacing"
Deinterlacing.Discard = "Discard"
Deinterlacing.Retro = "Retro"
Deinterlacing.Blend = "Blend"
Deinterlacing.Blend2x = "Blend 2x"
Deinterlacing.Linear = "Linear"
Deinterlacing.Linear2x = "Linear 2x"
Deinterlacing.Yadif = "Yadif"
Deinterlacing.Yadif2x = "Yadif 2x"
Deinterlacing.TopFieldFirst = "Top Field First"
Deinterlacing.BottomFieldFirst = "Bottom Field First"
2017-02-24 03:37:28 -08:00
# volume control accessibility text
2019-09-12 13:55:31 -07:00
VolControl.SliderUnmuted = "Volume slider for '%1': %2"
VolControl.SliderMuted = "Volume slider for '%1': %2 (currently muted)"
2017-02-24 03:37:28 -08:00
VolControl.Mute = "Mute '%1'"
VolControl.Properties = "Properties for '%1'"
2014-05-10 18:47:48 -07:00
# add scene dialog
Basic.Main.AddSceneDlg.Title = "Add Scene"
Basic.Main.AddSceneDlg.Text = "Please enter the name of the scene"
2014-05-09 15:09:17 -07:00
# add scene suggested name
Basic.Main.DefaultSceneName.Text = "Scene %1"
2015-06-23 19:29:07 -07:00
# add scene collection dialog
Basic.Main.AddSceneCollection.Title = "Add Scene Collection"
Basic.Main.AddSceneCollection.Text = "Please enter the name of the scene collection"
# rename scene collection dialog
Basic.Main.RenameSceneCollection.Title = "Rename Scene Collection"
2015-06-23 19:38:01 -07:00
# add profile dialog
AddProfile.Title = "Add Profile"
AddProfile.Text = "Please enter the name of the profile"
# rename profile dialog
RenameProfile.Title = "Rename Profile"
2017-10-20 12:23:07 -07:00
# rename audio source in mixer
Basic.Main.MixerRename.Title = "Rename Audio Source"
Basic.Main.MixerRename.Text = "Please enter the name of the audio source"
2015-04-02 21:35:46 -07:00
# preview window disabled
Basic.Main.PreviewDisabled = "Preview is currently disabled"
2014-05-10 18:47:48 -07:00
# add source dialog
2014-07-13 13:09:56 -07:00
Basic.SourceSelect = "Create/Select Source"
2014-05-10 18:47:48 -07:00
Basic.SourceSelect.CreateNew = "Create new"
Basic.SourceSelect.AddExisting = "Add Existing"
2015-09-19 03:49:37 -07:00
Basic.SourceSelect.AddVisible = "Make source visible"
2014-05-10 18:47:48 -07:00
2014-06-14 22:05:50 -07:00
# properties window
2014-07-12 02:08:51 -07:00
Basic.PropertiesWindow = "Properties for '%1'"
2015-10-19 06:37:41 -07:00
Basic.PropertiesWindow.AutoSelectFormat = "%1 (autoselect: %2)"
2014-07-19 12:00:14 -07:00
Basic.PropertiesWindow.SelectColor = "Select color"
2014-08-17 05:50:30 -07:00
Basic.PropertiesWindow.SelectFont = "Select font"
2015-01-13 18:03:52 -08:00
Basic.PropertiesWindow.ConfirmTitle = "Settings Changed"
2019-04-08 07:02:32 -07:00
Basic.PropertiesWindow.Confirm = "There are unsaved changes. Do you want to keep them?"
2015-02-16 09:31:00 -08:00
Basic.PropertiesWindow.NoProperties = "No properties available"
2015-04-13 11:23:54 -07:00
Basic.PropertiesWindow.AddFiles = "Add Files"
2016-06-15 16:19:25 -07:00
Basic.PropertiesWindow.AddDir = "Add Directory"
2015-04-13 11:23:54 -07:00
Basic.PropertiesWindow.AddURL = "Add Path/URL"
2016-06-15 16:19:25 -07:00
Basic.PropertiesWindow.AddEditableListDir = "Add directory to '%1'"
2015-04-13 11:23:54 -07:00
Basic.PropertiesWindow.AddEditableListFiles = "Add files to '%1'"
Basic.PropertiesWindow.AddEditableListEntry = "Add entry to '%1'"
Basic.PropertiesWindow.EditEditableListEntry = "Edit entry from '%1'"
2014-06-14 22:05:50 -07:00
2015-08-18 05:57:36 -07:00
# properties view
Basic.PropertiesView.FPS.Simple = "Simple FPS Values"
Basic.PropertiesView.FPS.Rational = "Rational FPS Values"
Basic.PropertiesView.FPS.ValidFPSRanges = "Valid FPS Ranges:"
2014-09-15 16:16:16 -07:00
# interaction window
Basic.InteractionWindow = "Interacting with '%1'"
2014-07-06 16:19:27 -07:00
# status bar
2015-05-10 16:18:11 -07:00
Basic.StatusBar.Reconnecting = "Disconnected, reconnecting in %2 second(s) (attempt %1)"
Basic.StatusBar.AttemptingReconnect = "Attempting to reconnect... (attempt %1)"
2014-07-06 16:19:27 -07:00
Basic.StatusBar.ReconnectSuccessful = "Reconnection successful"
2015-09-06 16:19:53 -07:00
Basic.StatusBar.Delay = "Delay (%1 sec)"
Basic.StatusBar.DelayStartingIn = "Delay (starting in %1 sec)"
Basic.StatusBar.DelayStoppingIn = "Delay (stopping in %1 sec)"
Basic.StatusBar.DelayStartingStoppingIn = "Delay (stopping in %1 sec, starting in %2 sec)"
2014-07-06 16:19:27 -07:00
2015-02-25 21:23:57 -08:00
# filters window
Basic.Filters = "Filters"
Basic.Filters.AsyncFilters = "Audio/Video Filters"
Basic.Filters.AudioFilters = "Audio Filters"
Basic.Filters.EffectFilters = "Effect Filters"
Basic.Filters.Title = "Filters for '%1'"
Basic.Filters.AddFilter.Title = "Filter name"
Basic.Filters.AddFilter.Text = "Please specify the name of the filter"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
# transform window
Basic.TransformWindow = "Scene Item Transform"
Basic.TransformWindow.Position = "Position"
Basic.TransformWindow.Rotation = "Rotation"
2014-06-22 17:37:06 -07:00
Basic.TransformWindow.Size = "Size"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
Basic.TransformWindow.Alignment = "Positional Alignment"
Basic.TransformWindow.BoundsType = "Bounding Box Type"
Basic.TransformWindow.BoundsAlignment = "Alignment in Bounding Box"
Basic.TransformWindow.Bounds = "Bounding Box Size"
2016-03-31 10:12:13 -07:00
Basic.TransformWindow.Crop = "Crop"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
Basic.TransformWindow.Alignment.TopLeft = "Top Left"
Basic.TransformWindow.Alignment.TopCenter = "Top Center"
Basic.TransformWindow.Alignment.TopRight = "Top Right"
Basic.TransformWindow.Alignment.CenterLeft = "Center Left"
Basic.TransformWindow.Alignment.Center = "Center"
Basic.TransformWindow.Alignment.CenterRight = "Center Right"
Basic.TransformWindow.Alignment.BottomLeft = "Bottom Left"
Basic.TransformWindow.Alignment.BottomCenter = "Bottom Center"
Basic.TransformWindow.Alignment.BottomRight = "Bottom Right"
Basic.TransformWindow.BoundsType.None = "No bounds"
Basic.TransformWindow.BoundsType.MaxOnly = "Maximum size only"
Basic.TransformWindow.BoundsType.ScaleInner = "Scale to inner bounds"
Basic.TransformWindow.BoundsType.ScaleOuter = "Scale to outer bounds"
Basic.TransformWindow.BoundsType.ScaleToWidth = "Scale to width of bounds"
Basic.TransformWindow.BoundsType.ScaleToHeight = "Scale to height of bounds"
Basic.TransformWindow.BoundsType.Stretch = "Stretch to bounds"
2014-05-09 15:08:23 -07:00
# no scene warning
Basic.Main.AddSourceHelp.Title = "Cannot Add Source"
Basic.Main.AddSourceHelp.Text = "You need to have at least 1 scene to add a source."
2014-05-10 18:47:48 -07:00
# basic mode main window
Basic.Main.Scenes = "Scenes"
Basic.Main.Sources = "Sources"
2017-07-27 02:40:41 -07:00
Basic.Main.Controls = "Controls"
2014-05-15 14:04:18 -07:00
Basic.Main.Connecting = "Connecting..."
2014-05-10 18:47:48 -07:00
Basic.Main.StartRecording = "Start Recording"
2016-12-07 05:21:44 -08:00
Basic.Main.StartReplayBuffer = "Start Replay Buffer"
2019-12-12 17:07:26 -08:00
Basic.Main.SaveReplay = "Save Replay"
2014-05-10 18:47:48 -07:00
Basic.Main.StartStreaming = "Start Streaming"
Basic.Main.StopRecording = "Stop Recording"
2019-07-07 15:47:29 -07:00
Basic.Main.PauseRecording = "Pause Recording"
Basic.Main.UnpauseRecording = "Unpause Recording"
2016-06-22 01:47:08 -07:00
Basic.Main.StoppingRecording = "Stopping Recording..."
2016-12-07 05:21:44 -08:00
Basic.Main.StopReplayBuffer = "Stop Replay Buffer"
Basic.Main.StoppingReplayBuffer = "Stopping Replay Buffer..."
2014-05-10 18:47:48 -07:00
Basic.Main.StopStreaming = "Stop Streaming"
2016-06-22 01:47:08 -07:00
Basic.Main.StoppingStreaming = "Stopping Stream..."
2015-09-06 16:19:53 -07:00
Basic.Main.ForceStopStreaming = "Stop Streaming (discard delay)"
2018-06-02 09:45:01 -07:00
Basic.Main.Group = "Group %1"
Basic.Main.GroupItems = "Group Selected Items"
Basic.Main.Ungroup = "Ungroup"
2019-08-27 01:08:43 -07:00
Basic.Main.GridMode = "Grid Mode"
Basic.Main.ListMode = "List Mode"
2014-05-10 18:47:48 -07:00
2014-05-18 17:44:10 -07:00
# basic mode file menu
2014-05-10 18:47:48 -07:00
Basic.MainMenu.File = "&File"
Basic.MainMenu.File.Export = "&Export"
Basic.MainMenu.File.Import = "&Import"
2014-08-21 18:18:42 -07:00
Basic.MainMenu.File.ShowRecordings = "Show &Recordings"
2014-10-13 09:38:06 -07:00
Basic.MainMenu.File.Remux = "Re&mux Recordings"
2014-05-10 18:47:48 -07:00
Basic.MainMenu.File.Settings = "&Settings"
2015-07-02 20:41:19 -07:00
Basic.MainMenu.File.ShowSettingsFolder = "Show Settings Folder"
Basic.MainMenu.File.ShowProfileFolder = "Show Profile Folder"
2016-01-22 07:33:29 -08:00
Basic.MainMenu.AlwaysOnTop = "&Always On Top"
2014-05-10 18:47:48 -07:00
Basic.MainMenu.File.Exit = "E&xit"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
# basic mode edit menu
Basic.MainMenu.Edit = "&Edit"
Basic.MainMenu.Edit.Undo = "&Undo"
Basic.MainMenu.Edit.Redo = "&Redo"
Basic.MainMenu.Edit.UndoAction = "&Undo $1"
Basic.MainMenu.Edit.RedoAction = "&Redo $1"
2016-07-26 01:32:43 -07:00
Basic.MainMenu.Edit.LockPreview = "&Lock Preview"
2016-11-05 09:48:46 -07:00
Basic.MainMenu.Edit.Scale = "Preview &Scaling"
Basic.MainMenu.Edit.Scale.Window = "Scale to Window"
Basic.MainMenu.Edit.Scale.Canvas = "Canvas (%1x%2)"
Basic.MainMenu.Edit.Scale.Output = "Output (%1x%2)"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
Basic.MainMenu.Edit.Transform = "&Transform"
Basic.MainMenu.Edit.Transform.EditTransform = "&Edit Transform..."
2016-12-06 23:43:23 -08:00
Basic.MainMenu.Edit.Transform.CopyTransform = "Copy Transform"
Basic.MainMenu.Edit.Transform.PasteTransform = "Paste Transform"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
Basic.MainMenu.Edit.Transform.ResetTransform = "&Reset Transform"
Basic.MainMenu.Edit.Transform.Rotate90CW = "Rotate 90 degrees CW"
Basic.MainMenu.Edit.Transform.Rotate90CCW = "Rotate 90 degrees CCW"
Basic.MainMenu.Edit.Transform.Rotate180 = "Rotate 180 degrees"
Basic.MainMenu.Edit.Transform.FlipHorizontal = "Flip &Horizontal"
Basic.MainMenu.Edit.Transform.FlipVertical = "Flip &Vertical"
Basic.MainMenu.Edit.Transform.FitToScreen = "&Fit to screen"
Basic.MainMenu.Edit.Transform.StretchToScreen = "&Stretch to screen"
Basic.MainMenu.Edit.Transform.CenterToScreen = "&Center to screen"
2019-03-27 22:00:12 -07:00
Basic.MainMenu.Edit.Transform.VerticalCenter = "Center Vertically"
Basic.MainMenu.Edit.Transform.HorizontalCenter = "Center Horizontally"
2014-06-30 19:47:06 -07:00
Basic.MainMenu.Edit.Order = "&Order"
Basic.MainMenu.Edit.Order.MoveUp = "Move &Up"
Basic.MainMenu.Edit.Order.MoveDown = "Move &Down"
Basic.MainMenu.Edit.Order.MoveToTop = "Move to &Top"
Basic.MainMenu.Edit.Order.MoveToBottom = "Move to &Bottom"
2014-12-28 00:38:00 -08:00
Basic.MainMenu.Edit.AdvAudio = "&Advanced Audio Properties"
UI: Add scene editing
So, scene editing was interesting (and by interesting I mean
excruciating). I almost implemented 'manipulator' visuals (ala 3dsmax
for example), and used 3 modes for controlling position/rotation/size,
but in a 2D editing, it felt clunky, so I defaulted back to simply
click-and-drag for movement, and then took a similar though slightly
different looking approach for handling scaling and reszing.
I also added a number of menu item helpers related to positioning,
scaling, rotating, flipping, and resetting the transform back to
default.
There is also a new 'transform' dialog (accessible via menu) which will
allow you to manually edit every single transform variable of a scene
item directly if desired.
If a scene item does not have bounds active, pulling on the sides of a
source will cause it to resize it via base scale rather than by the
bounding box system (if the source resizes that scale will apply). If
bounds are active, it will modify the bounding box only instead.
How a source scales when a bounding box is active depends on the type of
bounds being used. You can set it to scale to the inner bounds, the
outer bounds, scale to bounds width only, scale to bounds height only,
and a setting to stretch to bounds (which forces a source to always draw
at the bounding box size rather than be affected by its internal size).
You can also set it to be used as a 'maximum' size, so that the source
doesn't necessarily get scaled unless it extends beyond the bounds.
Like in OBS1, objects will snap to the edges unless the control key is
pressed. However, this will now happen even if the object is rotated or
oriented in any strange way. Snapping will also occur when stretching
or changing the bounding box size.
2014-06-15 00:54:48 -07:00
2016-06-30 14:52:56 -07:00
# basic mode view menu
2016-06-30 15:31:19 -07:00
Basic.MainMenu.View = "&View"
2016-06-30 14:52:56 -07:00
Basic.MainMenu.View.Toolbars = "&Toolbars"
2017-07-27 02:40:41 -07:00
Basic.MainMenu.View.Docks = "Docks"
Basic.MainMenu.View.Docks.ResetUI = "Reset UI"
Basic.MainMenu.View.Docks.LockUI = "Lock UI"
2019-08-08 03:27:45 -07:00
Basic.MainMenu.View.Docks.CustomBrowserDocks = "Custom Browser Docks..."
2016-06-30 14:52:56 -07:00
Basic.MainMenu.View.Toolbars.Listboxes = "&Listboxes"
Basic.MainMenu.View.SceneTransitions = "S&cene Transitions"
Basic.MainMenu.View.StatusBar = "&Status Bar"
2017-03-04 06:21:43 -08:00
Basic.MainMenu.View.Fullscreen.Interface = "Fullscreen Interface"
2016-06-30 14:52:56 -07:00
2015-06-23 19:29:07 -07:00
# basic mode profile/scene collection menus
Basic.MainMenu.SceneCollection = "&Scene Collection"
2015-06-23 19:38:01 -07:00
Basic.MainMenu.Profile = "&Profile"
2016-12-08 15:09:22 -08:00
Basic.MainMenu.Profile.Import = "Import Profile"
Basic.MainMenu.Profile.Export = "Export Profile"
Basic.MainMenu.SceneCollection.Import = "Import Scene Collection"
Basic.MainMenu.SceneCollection.Export = "Export Scene Collection"
Basic.MainMenu.Profile.Exists = "The profile already exists"
Basic.MainMenu.SceneCollection.Exists = "The scene collection already exists"
2015-06-23 19:29:07 -07:00
2016-08-28 14:24:14 -07:00
# basic mode help menu
Basic.MainMenu.Tools = "&Tools"
2014-05-18 17:44:10 -07:00
# basic mode help menu
Basic.MainMenu.Help = "&Help"
2018-01-05 13:20:39 -08:00
Basic.MainMenu.Help.HelpPortal = "Help &Portal"
2015-06-25 01:02:47 -07:00
Basic.MainMenu.Help.Website = "Visit &Website"
2018-08-01 18:41:57 -07:00
Basic.MainMenu.Help.Discord = "Join &Discord Server"
2014-05-18 17:44:10 -07:00
Basic.MainMenu.Help.Logs = "&Log Files"
2014-08-21 18:19:19 -07:00
Basic.MainMenu.Help.Logs.ShowLogs = "&Show Log Files"
2014-05-18 17:44:10 -07:00
Basic.MainMenu.Help.Logs.UploadCurrentLog = "Upload &Current Log File"
Basic.MainMenu.Help.Logs.UploadLastLog = "Upload &Last Log File"
2015-02-23 22:04:19 -08:00
Basic.MainMenu.Help.Logs.ViewCurrentLog = "&View Current Log"
2014-07-13 23:56:28 -07:00
Basic.MainMenu.Help.CheckForUpdates = "Check For Updates"
2018-03-16 16:27:49 -07:00
Basic.MainMenu.Help.CrashLogs = "Crash &Reports"
Basic.MainMenu.Help.CrashLogs.ShowLogs = "&Show Crash Reports"
Basic.MainMenu.Help.CrashLogs.UploadLastLog = "Upload &Last Crash Report"
2018-08-17 23:13:20 -07:00
Basic.MainMenu.Help.About = "&About"
2014-05-18 17:44:10 -07:00
2014-05-10 18:47:48 -07:00
# basic mode settings dialog
Basic.Settings.ProgramRestart = "The program must be restarted for these settings to take effect."
Basic.Settings.ConfirmTitle = "Confirm Changes"
2019-04-08 07:02:32 -07:00
Basic.Settings.Confirm = "You have unsaved changes. Save changes?"
2014-05-10 18:47:48 -07:00
# basic mode 'general' settings
Basic.Settings.General = "General"
2015-02-16 23:45:34 -08:00
Basic.Settings.General.Theme = "Theme"
2015-03-12 09:09:46 -07:00
Basic.Settings.General.Language = "Language"
2017-02-20 04:46:29 -08:00
Basic.Settings.General.EnableAutoUpdates = "Automatically check for updates on startup"
2017-05-13 20:47:47 -07:00
Basic.Settings.General.OpenStatsOnStartup = "Open stats dialog on startup"
2016-01-22 08:09:04 -08:00
Basic.Settings.General.WarnBeforeStartingStream = "Show confirmation dialog when starting streams"
Basic.Settings.General.WarnBeforeStoppingStream = "Show confirmation dialog when stopping streams"
2019-06-17 07:14:14 -07:00
Basic.Settings.General.WarnBeforeStoppingRecord = "Show confirmation dialog when stopping recording"
2017-02-20 03:53:34 -08:00
Basic.Settings.General.Projectors = "Projectors"
2016-06-27 14:47:42 -07:00
Basic.Settings.General.HideProjectorCursor = "Hide cursor over projectors"
2016-08-21 16:11:32 -07:00
Basic.Settings.General.ProjectorAlwaysOnTop = "Make projectors always on top"
2016-04-06 18:03:29 -07:00
Basic.Settings.General.Snapping = "Source Alignment Snapping"
Basic.Settings.General.ScreenSnapping = "Snap Sources to edge of screen"
2016-04-06 18:10:39 -07:00
Basic.Settings.General.CenterSnapping = "Snap Sources to horizontal and vertical center"
2016-04-06 18:13:56 -07:00
Basic.Settings.General.SourceSnapping = "Snap Sources to other sources"
2016-04-06 18:03:29 -07:00
Basic.Settings.General.SnapDistance = "Snap Sensitivity"
2016-06-16 10:59:36 -07:00
Basic.Settings.General.RecordWhenStreaming = "Automatically record when streaming"
Basic.Settings.General.KeepRecordingWhenStreamStops = "Keep recording when stream stops"
2017-01-04 13:11:52 -08:00
Basic.Settings.General.ReplayBufferWhileStreaming = "Automatically start replay buffer when streaming"
Basic.Settings.General.KeepReplayBufferStreamStops = "Keep replay buffer active when stream stops"
2017-02-25 11:26:28 -08:00
Basic.Settings.General.SysTray = "System Tray"
2016-08-13 07:36:17 -07:00
Basic.Settings.General.SysTrayWhenStarted = "Minimize to system tray when started"
2017-01-30 18:38:21 -08:00
Basic.Settings.General.SystemTrayHideMinimize = "Always minimize to system tray instead of task bar"
2016-12-29 07:21:53 -08:00
Basic.Settings.General.SaveProjectors = "Save projectors on exit"
2019-01-14 17:58:20 -08:00
Basic.Settings.General.Preview = "Preview"
Basic.Settings.General.OverflowHidden = "Hide overflow"
Basic.Settings.General.OverflowAlwaysVisible = "Overflow always visible"
Basic.Settings.General.OverflowSelectionHidden = "Show overflow even when source is invisible"
2017-09-21 13:37:01 -07:00
Basic.Settings.General.SwitchOnDoubleClick = "Transition to scene when double-clicked"
2017-11-08 20:44:22 -08:00
Basic.Settings.General.StudioPortraitLayout = "Enable portrait/vertical layout"
2019-02-28 13:29:41 -08:00
Basic.Settings.General.TogglePreviewProgramLabels = "Show preview/program labels"
2018-03-16 12:20:18 -07:00
Basic.Settings.General.Multiview = "Multiview"
2018-03-16 14:55:56 -07:00
Basic.Settings.General.Multiview.MouseSwitch = "Click to switch between scenes"
2018-03-16 19:00:32 -07:00
Basic.Settings.General.Multiview.DrawSourceNames = "Show scene names"
2018-03-18 19:02:27 -07:00
Basic.Settings.General.Multiview.DrawSafeAreas = "Draw safe areas (EBU R 95)"
2017-12-13 13:42:19 -08:00
Basic.Settings.General.MultiviewLayout = "Multiview Layout"
2018-03-20 17:41:39 -07:00
Basic.Settings.General.MultiviewLayout.Horizontal.Top = "Horizontal, Top (8 Scenes)"
Basic.Settings.General.MultiviewLayout.Horizontal.Bottom = "Horizontal, Bottom (8 Scenes)"
Basic.Settings.General.MultiviewLayout.Vertical.Left = "Vertical, Left (8 Scenes)"
Basic.Settings.General.MultiviewLayout.Vertical.Right = "Vertical, Right (8 Scenes)"
2018-03-22 20:57:15 -07:00
Basic.Settings.General.MultiviewLayout.Horizontal.Extended.Top = "Horizontal, Top (24 Scenes)"
2014-05-10 18:47:48 -07:00
# basic mode 'stream' settings
Basic.Settings.Stream = "Stream"
Basic.Settings.Stream.StreamType = "Stream Type"
2019-02-14 23:09:43 -08:00
Basic.Settings.Stream.Custom.UseAuthentication = "Use authentication"
Basic.Settings.Stream.Custom.Username = "Username"
Basic.Settings.Stream.Custom.Password = "Password"
2019-03-08 17:54:41 -08:00
Basic.Settings.Stream.BandwidthTestMode = "Enable Bandwidth Test Mode"
2019-10-09 18:29:09 -07:00
Basic.Settings.Stream.TTVAddon = "Twitch Chat Add-Ons"
Basic.Settings.Stream.TTVAddon.None = "None"
Basic.Settings.Stream.TTVAddon.BTTV = "BetterTTV"
Basic.Settings.Stream.TTVAddon.FFZ = "FrankerFaceZ"
Basic.Settings.Stream.TTVAddon.Both = "BetterTTV and FrankerFaceZ"
2019-11-26 14:55:46 -08:00
Basic.Settings.Stream.MissingSettingAlert = "Missing Stream Setup"
Basic.Settings.Stream.StreamSettingsWarning = "Open Settings"
Basic.Settings.Stream.MissingUrlAndApiKey = "URL and Stream Key are missing.\n\nOpen settings to enter the URL and Stream Key in the 'stream' tab."
Basic.Settings.Stream.MissingUrl = "Stream URL is missing.\n\nOpen settings to enter the URL in the 'Stream' tab."
Basic.Settings.Stream.MissingStreamKey = "Stream key is missing.\n\nOpen settings to enter the stream key in the 'Stream' tab."
2014-05-10 18:47:48 -07:00
# basic mode 'output' settings
Basic.Settings.Output = "Output"
2015-05-29 09:45:54 -07:00
Basic.Settings.Output.Format = "Recording Format"
2015-01-26 13:41:22 -08:00
Basic.Settings.Output.Encoder = "Encoder"
Basic.Settings.Output.SelectDirectory = "Select Recording Directory"
Basic.Settings.Output.SelectFile = "Select Recording File"
2016-04-10 03:10:36 -07:00
Basic.Settings.Output.EnforceBitrate = "Enforce streaming service bitrate limits"
2019-08-15 08:50:09 -07:00
Basic.Settings.Output.DynamicBitrate = "Dynamically change bitrate to manage congestion"
Basic.Settings.Output.DynamicBitrate.Beta = "Dynamically change bitrate to manage congestion (Beta)"
2019-08-22 16:26:34 -07:00
Basic.Settings.Output.DynamicBitrate.TT = "Instead of dropping frames to reduce congestion, dynamically changes bitrate on the fly.\n\nNote that this can increase delay to viewers if there is significant sudden congestion.\nWhen the bitrate drops, it can take up to a few minutes to restore.\n\nCurrently only supported for RTMP."
2014-05-10 18:47:48 -07:00
Basic.Settings.Output.Mode = "Output Mode"
2015-02-06 13:47:04 -08:00
Basic.Settings.Output.Mode.Simple = "Simple"
2015-01-26 13:41:22 -08:00
Basic.Settings.Output.Mode.Adv = "Advanced"
Basic.Settings.Output.Mode.FFmpeg = "FFmpeg Output"
2016-12-09 14:40:04 -08:00
Basic.Settings.Output.UseReplayBuffer = "Enable Replay Buffer"
2019-07-18 00:38:50 -07:00
Basic.Settings.Output.ReplayBuffer.SecondsMax = "Maximum Replay Time"
2016-12-07 05:21:44 -08:00
Basic.Settings.Output.ReplayBuffer.MegabytesMax = "Maximum Memory (Megabytes)"
Basic.Settings.Output.ReplayBuffer.Estimate = "Estimated memory usage: %1 MB"
2019-04-08 07:02:32 -07:00
Basic.Settings.Output.ReplayBuffer.EstimateUnknown = "Cannot estimate memory usage. Please set maximum memory limit."
2016-12-07 05:21:44 -08:00
Basic.Settings.Output.ReplayBuffer.HotkeyMessage = "(Note: Make sure to set a hotkey for the replay buffer in the hotkeys section)"
2016-12-09 14:40:04 -08:00
Basic.Settings.Output.ReplayBuffer.Prefix = "Replay Buffer Filename Prefix"
Basic.Settings.Output.ReplayBuffer.Suffix = "Suffix"
2015-05-31 18:19:34 -07:00
Basic.Settings.Output.Simple.SavePath = "Recording Path"
UI: Add recording presets to simple output
So certain high-profile individuals were complaining that it was
difficult to configure recording settings for quality in OBS. So, I
decided to add a very easy-to-use auto-configuration for high quality
encoding -- including lossless encoding. This feature will
automatically configure ideal recording settings based upon a specified
quality level.
Recording quality presets added to simple output:
- Same as stream: Copies the encoded streaming data with no extra usage
hit.
- High quality: uses a higher CRF value (starting at 23) if using x264.
- Indistinguishable quality: uses a low CRF value (starting at 16) if
using x264.
- Lossless will spawn an FFmpeg output that uses huffyuv encoding. If a
user tries to select lossless, they will be warned both via a dialog
prompt and a warning message in the settings window to ensure they
understand that it requires tremendous amounts of free space. It will
always use the AVI file format.
Extra Notes:
- When High/Indistinguishable quality is set, it will allow you to
select the recording encoder. Currently, it just allows you to select
x264 (at either veryfast or ultrafast). Later on, it'll be useful to
be able to set up pre-configured presets for hardware encoders once
more are implemented and tested.
- I decided to allow the use of x264 at both veryfast or ultrafast
presets. The reasoning is two-fold:
1.) ultrafast is perfectly viable even for near indistinguishable
quality as long as it has the appropriate CRF value. It's nice if you
want to record but would like to or need to reduce the impact of
encoding on the CPU. It will automatically compensate for the preset at
the cost of larger file size.
2.) It was suggested to just always use ultrafast, but ultrafast
requires 2-4x as much disk space for the same CRF (most likely due to
x264 compensating for the preset). Providing veryfast is important if
you really want to reduce file size and/or reduce blocking at lower
quality levels.
- When a recording preset is used, a secondary audio encoder is also
spawned at 192 bitrate to ensure high quality audio. I chose 192
because that's the limit of the media foundation aac encoder on
windows, which I want to make sure is used if available due to its
high performance.
- The CRF calculation is based upon resolution, quality, and whether
it's set to ultrafast. First, quality sets the base CRF, 23 for
"good" quality, 16 for "very high" quality. If set to ultrafast,
it'll subtract 2 points from the CRF value to help compensate. Lower
resolutions will also lower the CRF value to help improve higher
details with a smaller pixel ratio.
2015-09-18 22:29:36 -07:00
Basic.Settings.Output.Simple.RecordingQuality = "Recording Quality"
Basic.Settings.Output.Simple.RecordingQuality.Stream = "Same as stream"
Basic.Settings.Output.Simple.RecordingQuality.Small = "High Quality, Medium File Size"
Basic.Settings.Output.Simple.RecordingQuality.HQ = "Indistinguishable Quality, Large File Size"
Basic.Settings.Output.Simple.RecordingQuality.Lossless = "Lossless Quality, Tremendously Large File Size"
2019-04-08 07:02:32 -07:00
Basic.Settings.Output.Simple.Warn.VideoBitrate = "Warning: The streaming video bitrate will be set to %1, which is the upper limit for the current streaming service. If you're sure you want to go above %1, enable advanced encoder options and uncheck \"Enforce streaming service bitrate limits\"."
Basic.Settings.Output.Simple.Warn.AudioBitrate = "Warning: The streaming audio bitrate will be set to %1, which is the upper limit for the current streaming service. If you're sure you want to go above %1, enable advanced encoder options and uncheck \"Enforce streaming service bitrate limits\"."
2019-07-07 15:47:29 -07:00
Basic.Settings.Output.Simple.Warn.CannotPause = "Warning: Recordings cannot be paused if the recording quality is set to \"Same as stream\"."
UI: Add recording presets to simple output
So certain high-profile individuals were complaining that it was
difficult to configure recording settings for quality in OBS. So, I
decided to add a very easy-to-use auto-configuration for high quality
encoding -- including lossless encoding. This feature will
automatically configure ideal recording settings based upon a specified
quality level.
Recording quality presets added to simple output:
- Same as stream: Copies the encoded streaming data with no extra usage
hit.
- High quality: uses a higher CRF value (starting at 23) if using x264.
- Indistinguishable quality: uses a low CRF value (starting at 16) if
using x264.
- Lossless will spawn an FFmpeg output that uses huffyuv encoding. If a
user tries to select lossless, they will be warned both via a dialog
prompt and a warning message in the settings window to ensure they
understand that it requires tremendous amounts of free space. It will
always use the AVI file format.
Extra Notes:
- When High/Indistinguishable quality is set, it will allow you to
select the recording encoder. Currently, it just allows you to select
x264 (at either veryfast or ultrafast). Later on, it'll be useful to
be able to set up pre-configured presets for hardware encoders once
more are implemented and tested.
- I decided to allow the use of x264 at both veryfast or ultrafast
presets. The reasoning is two-fold:
1.) ultrafast is perfectly viable even for near indistinguishable
quality as long as it has the appropriate CRF value. It's nice if you
want to record but would like to or need to reduce the impact of
encoding on the CPU. It will automatically compensate for the preset at
the cost of larger file size.
2.) It was suggested to just always use ultrafast, but ultrafast
requires 2-4x as much disk space for the same CRF (most likely due to
x264 compensating for the preset). Providing veryfast is important if
you really want to reduce file size and/or reduce blocking at lower
quality levels.
- When a recording preset is used, a secondary audio encoder is also
spawned at 192 bitrate to ensure high quality audio. I chose 192
because that's the limit of the media foundation aac encoder on
windows, which I want to make sure is used if available due to its
high performance.
- The CRF calculation is based upon resolution, quality, and whether
it's set to ultrafast. First, quality sets the base CRF, 23 for
"good" quality, 16 for "very high" quality. If set to ultrafast,
it'll subtract 2 points from the CRF value to help compensate. Lower
resolutions will also lower the CRF value to help improve higher
details with a smaller pixel ratio.
2015-09-18 22:29:36 -07:00
Basic.Settings.Output.Simple.Warn.Encoder = "Warning: Recording with a software encoder at a different quality than the stream will require extra CPU usage if you stream and record at the same time."
2019-04-08 07:02:32 -07:00
Basic.Settings.Output.Simple.Warn.Lossless = "Warning: Lossless quality generates tremendously large file sizes! Lossless quality can use upward of 7 gigabytes of disk space per minute at high resolutions and framerates. Lossless is not recommended for long recordings unless you have a very large amount of disk space available."
UI: Add recording presets to simple output
So certain high-profile individuals were complaining that it was
difficult to configure recording settings for quality in OBS. So, I
decided to add a very easy-to-use auto-configuration for high quality
encoding -- including lossless encoding. This feature will
automatically configure ideal recording settings based upon a specified
quality level.
Recording quality presets added to simple output:
- Same as stream: Copies the encoded streaming data with no extra usage
hit.
- High quality: uses a higher CRF value (starting at 23) if using x264.
- Indistinguishable quality: uses a low CRF value (starting at 16) if
using x264.
- Lossless will spawn an FFmpeg output that uses huffyuv encoding. If a
user tries to select lossless, they will be warned both via a dialog
prompt and a warning message in the settings window to ensure they
understand that it requires tremendous amounts of free space. It will
always use the AVI file format.
Extra Notes:
- When High/Indistinguishable quality is set, it will allow you to
select the recording encoder. Currently, it just allows you to select
x264 (at either veryfast or ultrafast). Later on, it'll be useful to
be able to set up pre-configured presets for hardware encoders once
more are implemented and tested.
- I decided to allow the use of x264 at both veryfast or ultrafast
presets. The reasoning is two-fold:
1.) ultrafast is perfectly viable even for near indistinguishable
quality as long as it has the appropriate CRF value. It's nice if you
want to record but would like to or need to reduce the impact of
encoding on the CPU. It will automatically compensate for the preset at
the cost of larger file size.
2.) It was suggested to just always use ultrafast, but ultrafast
requires 2-4x as much disk space for the same CRF (most likely due to
x264 compensating for the preset). Providing veryfast is important if
you really want to reduce file size and/or reduce blocking at lower
quality levels.
- When a recording preset is used, a secondary audio encoder is also
spawned at 192 bitrate to ensure high quality audio. I chose 192
because that's the limit of the media foundation aac encoder on
windows, which I want to make sure is used if available due to its
high performance.
- The CRF calculation is based upon resolution, quality, and whether
it's set to ultrafast. First, quality sets the base CRF, 23 for
"good" quality, 16 for "very high" quality. If set to ultrafast,
it'll subtract 2 points from the CRF value to help compensate. Lower
resolutions will also lower the CRF value to help improve higher
details with a smaller pixel ratio.
2015-09-18 22:29:36 -07:00
Basic.Settings.Output.Simple.Warn.Lossless.Msg = "Are you sure you want to use lossless quality?"
Basic.Settings.Output.Simple.Warn.Lossless.Title = "Lossless quality warning!"
Basic.Settings.Output.Simple.Encoder.Software = "Software (x264)"
2016-04-18 00:56:51 -07:00
Basic.Settings.Output.Simple.Encoder.Hardware.QSV = "Hardware (QSV)"
2016-09-26 16:29:33 -07:00
Basic.Settings.Output.Simple.Encoder.Hardware.AMD = "Hardware (AMD)"
2016-04-18 16:12:59 -07:00
Basic.Settings.Output.Simple.Encoder.Hardware.NVENC = "Hardware (NVENC)"
UI: Add recording presets to simple output
So certain high-profile individuals were complaining that it was
difficult to configure recording settings for quality in OBS. So, I
decided to add a very easy-to-use auto-configuration for high quality
encoding -- including lossless encoding. This feature will
automatically configure ideal recording settings based upon a specified
quality level.
Recording quality presets added to simple output:
- Same as stream: Copies the encoded streaming data with no extra usage
hit.
- High quality: uses a higher CRF value (starting at 23) if using x264.
- Indistinguishable quality: uses a low CRF value (starting at 16) if
using x264.
- Lossless will spawn an FFmpeg output that uses huffyuv encoding. If a
user tries to select lossless, they will be warned both via a dialog
prompt and a warning message in the settings window to ensure they
understand that it requires tremendous amounts of free space. It will
always use the AVI file format.
Extra Notes:
- When High/Indistinguishable quality is set, it will allow you to
select the recording encoder. Currently, it just allows you to select
x264 (at either veryfast or ultrafast). Later on, it'll be useful to
be able to set up pre-configured presets for hardware encoders once
more are implemented and tested.
- I decided to allow the use of x264 at both veryfast or ultrafast
presets. The reasoning is two-fold:
1.) ultrafast is perfectly viable even for near indistinguishable
quality as long as it has the appropriate CRF value. It's nice if you
want to record but would like to or need to reduce the impact of
encoding on the CPU. It will automatically compensate for the preset at
the cost of larger file size.
2.) It was suggested to just always use ultrafast, but ultrafast
requires 2-4x as much disk space for the same CRF (most likely due to
x264 compensating for the preset). Providing veryfast is important if
you really want to reduce file size and/or reduce blocking at lower
quality levels.
- When a recording preset is used, a secondary audio encoder is also
spawned at 192 bitrate to ensure high quality audio. I chose 192
because that's the limit of the media foundation aac encoder on
windows, which I want to make sure is used if available due to its
high performance.
- The CRF calculation is based upon resolution, quality, and whether
it's set to ultrafast. First, quality sets the base CRF, 23 for
"good" quality, 16 for "very high" quality. If set to ultrafast,
it'll subtract 2 points from the CRF value to help compensate. Lower
resolutions will also lower the CRF value to help improve higher
details with a smaller pixel ratio.
2015-09-18 22:29:36 -07:00
Basic.Settings.Output.Simple.Encoder.SoftwareLowCPU = "Software (x264 low CPU usage preset, increases file size)"
2014-07-03 18:07:33 -07:00
Basic.Settings.Output.VideoBitrate = "Video Bitrate"
Basic.Settings.Output.AudioBitrate = "Audio Bitrate"
Basic.Settings.Output.Reconnect = "Automatically Reconnect"
2019-07-18 00:38:50 -07:00
Basic.Settings.Output.RetryDelay = "Retry Delay"
2014-07-03 18:07:33 -07:00
Basic.Settings.Output.MaxRetries = "Maximum Retries"
2014-09-24 19:29:41 -07:00
Basic.Settings.Output.Advanced = "Enable Advanced Encoder Settings"
2019-02-11 16:58:45 -08:00
Basic.Settings.Output.EncoderPreset = "Encoder Preset"
2015-01-18 06:29:24 -08:00
Basic.Settings.Output.CustomEncoderSettings = "Custom Encoder Settings"
2015-11-23 06:36:06 -08:00
Basic.Settings.Output.CustomMuxerSettings = "Custom Muxer Settings"
2015-11-27 03:14:18 -08:00
Basic.Settings.Output.NoSpaceFileName = "Generate File Name without Space"
2015-01-26 13:41:22 -08:00
# basic mode 'output' settings - advanced section
Basic.Settings.Output.Adv.Rescale = "Rescale Output"
Basic.Settings.Output.Adv.AudioTrack = "Audio Track"
Basic.Settings.Output.Adv.Streaming = "Streaming"
2015-02-10 20:06:00 -08:00
Basic.Settings.Output.Adv.ApplyServiceSettings = "Enforce streaming service encoder settings"
2015-01-26 13:41:22 -08:00
Basic.Settings.Output.Adv.Audio.Track1 = "Track 1"
Basic.Settings.Output.Adv.Audio.Track2 = "Track 2"
Basic.Settings.Output.Adv.Audio.Track3 = "Track 3"
Basic.Settings.Output.Adv.Audio.Track4 = "Track 4"
2016-12-21 17:41:59 -08:00
Basic.Settings.Output.Adv.Audio.Track5 = "Track 5"
Basic.Settings.Output.Adv.Audio.Track6 = "Track 6"
2015-01-26 13:41:22 -08:00
# basic mode 'output' settings - advanced section - recording subsection
Basic.Settings.Output.Adv.Recording = "Recording"
Basic.Settings.Output.Adv.Recording.Type = "Type"
Basic.Settings.Output.Adv.Recording.Type.Standard = "Standard"
Basic.Settings.Output.Adv.Recording.Type.FFmpegOutput = "Custom Output (FFmpeg)"
Basic.Settings.Output.Adv.Recording.UseStreamEncoder = "(Use stream encoder)"
2016-03-25 02:43:38 -07:00
Basic.Settings.Output.Adv.Recording.Filename = "Filename Formatting"
Basic.Settings.Output.Adv.Recording.OverwriteIfExists = "Overwrite if file exists"
2015-08-18 20:58:24 -07:00
Basic.Settings.Output.Adv.FFmpeg.Type = "FFmpeg Output Type"
Basic.Settings.Output.Adv.FFmpeg.Type.URL = "Output to URL"
Basic.Settings.Output.Adv.FFmpeg.Type.RecordToFile = "Output to File"
2015-02-07 12:12:12 -08:00
Basic.Settings.Output.Adv.FFmpeg.SaveFilter.Common = "Common recording formats"
Basic.Settings.Output.Adv.FFmpeg.SaveFilter.All = "All Files"
2015-01-26 13:41:22 -08:00
Basic.Settings.Output.Adv.FFmpeg.SavePathURL = "File path or URL"
2015-03-28 00:21:16 -07:00
Basic.Settings.Output.Adv.FFmpeg.Format = "Container Format"
Basic.Settings.Output.Adv.FFmpeg.FormatAudio = "Audio"
Basic.Settings.Output.Adv.FFmpeg.FormatVideo = "Video"
Basic.Settings.Output.Adv.FFmpeg.FormatDefault = "Default Format"
Basic.Settings.Output.Adv.FFmpeg.FormatDesc = "Container Format Description"
Basic.Settings.Output.Adv.FFmpeg.FormatDescDef = "Audio/Video Codec guessed from File path or URL"
Basic.Settings.Output.Adv.FFmpeg.AVEncoderDefault = "Default Encoder"
Basic.Settings.Output.Adv.FFmpeg.AVEncoderDisable = "Disable Encoder"
Basic.Settings.Output.Adv.FFmpeg.VEncoder = "Video Encoder"
2015-01-26 13:41:22 -08:00
Basic.Settings.Output.Adv.FFmpeg.VEncoderSettings = "Video Encoder Settings (if any)"
2015-03-28 00:21:16 -07:00
Basic.Settings.Output.Adv.FFmpeg.AEncoder = "Audio Encoder"
2015-01-26 13:41:22 -08:00
Basic.Settings.Output.Adv.FFmpeg.AEncoderSettings = "Audio Encoder Settings (if any)"
2015-09-16 01:26:48 -07:00
Basic.Settings.Output.Adv.FFmpeg.MuxerSettings = "Muxer Settings (if any)"
2017-02-17 08:25:21 -08:00
Basic.Settings.Output.Adv.FFmpeg.GOPSize = "Keyframe interval (frames)"
2017-02-17 09:07:32 -08:00
Basic.Settings.Output.Adv.FFmpeg.IgnoreCodecCompat = "Show all codecs (even if potentially incompatible)"
2014-05-10 18:47:48 -07:00
2016-03-25 02:43:38 -07:00
# basic mode 'output' settings - advanced section - recording subsection - completer
2019-05-29 12:34:29 -07:00
FilenameFormatting.completer = "%CCYY-%MM-%DD %hh-%mm-%ss\n%YY-%MM-%DD %hh-%mm-%ss\n%Y-%m-%d %H-%M-%S\n%y-%m-%d %H-%M-%S\n%a %Y-%m-%d %H-%M-%S\n%A %Y-%m-%d %H-%M-%S\n%Y-%b-%d %H-%M-%S\n%Y-%B-%d %H-%M-%S\n%Y-%m-%d %I-%M-%S-%p\n%Y-%m-%d %H-%M-%S-%z\n%Y-%m-%d %H-%M-%S-%Z\n%FPS\n%CRES\n%ORES\n%VF"
2016-03-25 02:43:38 -07:00
# basic mode 'output' settings - advanced section - recording subsection - TT
2019-05-29 12:34:29 -07:00
FilenameFormatting.TT = "%CCYY Year, four digits\n%YY Year, last two digits (00-99)\n%MM Month as a decimal number (01-12)\n%DD Day of the month, zero-padded (01-31)\n%hh Hour in 24h format (00-23)\n%mm Minute (00-59)\n%ss Second (00-61)\n%% A % sign\n%a Abbreviated weekday name\n%A Full weekday name\n%b Abbreviated month name\n%B Full month name\n%d Day of the month, zero-padded (01-31)\n%H Hour in 24h format (00-23)\n%I Hour in 12h format (01-12)\n%m Month as a decimal number (01-12)\n%M Minute (00-59)\n%p AM or PM designation\n%S Second (00-61)\n%y Year, last two digits (00-99)\n%Y Year\n%z ISO 8601 offset from UTC in timezone\n%Z Timezone name or abbreviation\n%FPS Frames per second\n%CRES Base (canvas) resolution\n%ORES Output (scaled) resolution\n%VF Video format"
2016-03-25 02:43:38 -07:00
2014-05-10 18:47:48 -07:00
# basic mode 'video' settings
Basic.Settings.Video = "Video"
2017-05-06 12:12:37 -07:00
Basic.Settings.Video.Adapter = "Video Adapter"
Basic.Settings.Video.BaseResolution = "Base (Canvas) Resolution"
Basic.Settings.Video.ScaledResolution = "Output (Scaled) Resolution"
Basic.Settings.Video.DownscaleFilter = "Downscale Filter"
2014-05-10 18:47:48 -07:00
Basic.Settings.Video.DisableAeroWindows = "Disable Aero (Windows only)"
2017-05-06 12:12:37 -07:00
Basic.Settings.Video.FPS = "FPS"
2014-05-10 18:47:48 -07:00
Basic.Settings.Video.FPSCommon = "Common FPS Values"
Basic.Settings.Video.FPSInteger = "Integer FPS Value"
Basic.Settings.Video.FPSFraction = "Fractional FPS Value"
2017-05-06 12:12:37 -07:00
Basic.Settings.Video.Numerator = "Numerator"
Basic.Settings.Video.Denominator = "Denominator"
Basic.Settings.Video.Renderer = "Renderer"
2019-04-08 07:02:32 -07:00
Basic.Settings.Video.InvalidResolution = "Invalid resolution value. Must be [width]x[height] (i.e. 1920x1080)"
Basic.Settings.Video.CurrentlyActive = "Video output is currently active. Please turn off any outputs to change video settings."
2015-05-25 01:37:13 -07:00
Basic.Settings.Video.DisableAero = "Disable Aero"
2014-05-10 18:47:48 -07:00
2014-12-15 01:08:46 -08:00
# scale filters
Basic.Settings.Video.DownscaleFilter.Bilinear = "Bilinear (Fastest, but blurry if scaling)"
Basic.Settings.Video.DownscaleFilter.Bicubic = "Bicubic (Sharpened scaling, 16 samples)"
2019-07-27 08:39:00 -07:00
Basic.Settings.Video.DownscaleFilter.Lanczos = "Lanczos (Sharpened scaling, 36 samples)"
2019-08-15 21:38:55 -07:00
Basic.Settings.Video.DownscaleFilter.Area = "Area (Weighted sum, 4/6/9 samples)"
2014-12-15 01:08:46 -08:00
2014-05-10 18:47:48 -07:00
# basic mode 'audio' settings
Basic.Settings.Audio = "Audio"
Basic.Settings.Audio.SampleRate = "Sample Rate"
Basic.Settings.Audio.Channels = "Channels"
2019-02-02 03:09:47 -08:00
Basic.Settings.Audio.Meters = "Meters"
Basic.Settings.Audio.MeterDecayRate = "Decay Rate"
2018-01-09 12:45:20 -08:00
Basic.Settings.Audio.MeterDecayRate.Fast = "Fast"
Basic.Settings.Audio.MeterDecayRate.Medium = "Medium (Type I PPM)"
Basic.Settings.Audio.MeterDecayRate.Slow = "Slow (Type II PPM)"
2018-01-19 13:57:36 -08:00
Basic.Settings.Audio.PeakMeterType = "Peak Meter Type"
Basic.Settings.Audio.PeakMeterType.SamplePeak = "Sample Peak"
Basic.Settings.Audio.PeakMeterType.TruePeak = "True Peak (Higher CPU usage)"
libobs: Add surround sound audio support
(This commit also modifies the following modules: UI,
deps/media-playback, coreaudio-encoder, decklink, linux-alsa,
linux-pulseaudio, mac-capture, obs-ffmpeg, obs-filters, obs-libfdk,
obs-outputs, win-dshow, and win-wasapi)
Adds surround sound audio support to the core, core plugins, and user
interface.
Compatible streaming services: Twitch, FB 360 live
Compatible protocols: rtmp / mpeg-ts tcp udp
Compatible file formats: mkv mp4 ts (others untested)
Compatible codecs: ffmpeg aac, fdk_aac, CoreAudio aac,
opus, vorbis, pcm (others untested).
Tested streaming servers: wowza, nginx
HLS, mpeg-dash : surround passthrough
Html5 players tested with live surround:
videojs, mediaelement, viblast (hls+dash), hls.js
Decklink: on win32, swap channels order for 5.1 7.1
(due to different channel mapping on wav, mpeg, ffmpeg)
Audio filters: surround working.
Monitoring: surround working (win macOs linux (pulse-audio)).
VST: stereo plugins keep in general only the first two channels.
surround plugins should work (e.g. mcfx does).
OS: win, macOs, linux (alsa, pulse-audio).
Misc: larger audio bitrates unlocked to accommodate more channels
NB: mf-aac only supports mono and stereo + 5.1 on win 10
(not implemented due to lack of usefulness)
Closes jp9000/obs-studio#968
2017-05-26 17:15:54 -07:00
Basic.Settings.Audio.MultiChannelWarning.Enabled = "WARNING: Surround sound audio is enabled."
2019-08-03 14:08:15 -07:00
Basic.Settings.Audio.MultichannelWarning = "If streaming, check to see if your streaming service supports both surround sound ingest and surround sound playback. Facebook 360 Live, Mixer RTMP, Smashcast are examples where surround sound is fully supported. Although Facebook Live and YouTube Live both accept surround ingest, Facebook Live downmixes to stereo, and YouTube Live plays only two channels.\n\nOBS audio filters are compatible with surround sound, though VST plugin support isn't guaranteed."
libobs: Add surround sound audio support
(This commit also modifies the following modules: UI,
deps/media-playback, coreaudio-encoder, decklink, linux-alsa,
linux-pulseaudio, mac-capture, obs-ffmpeg, obs-filters, obs-libfdk,
obs-outputs, win-dshow, and win-wasapi)
Adds surround sound audio support to the core, core plugins, and user
interface.
Compatible streaming services: Twitch, FB 360 live
Compatible protocols: rtmp / mpeg-ts tcp udp
Compatible file formats: mkv mp4 ts (others untested)
Compatible codecs: ffmpeg aac, fdk_aac, CoreAudio aac,
opus, vorbis, pcm (others untested).
Tested streaming servers: wowza, nginx
HLS, mpeg-dash : surround passthrough
Html5 players tested with live surround:
videojs, mediaelement, viblast (hls+dash), hls.js
Decklink: on win32, swap channels order for 5.1 7.1
(due to different channel mapping on wav, mpeg, ffmpeg)
Audio filters: surround working.
Monitoring: surround working (win macOs linux (pulse-audio)).
VST: stereo plugins keep in general only the first two channels.
surround plugins should work (e.g. mcfx does).
OS: win, macOs, linux (alsa, pulse-audio).
Misc: larger audio bitrates unlocked to accommodate more channels
NB: mf-aac only supports mono and stereo + 5.1 on win 10
(not implemented due to lack of usefulness)
Closes jp9000/obs-studio#968
2017-05-26 17:15:54 -07:00
Basic.Settings.Audio.MultichannelWarning.Title = "Enable surround sound audio?"
Basic.Settings.Audio.MultichannelWarning.Confirm = "Are you sure you want to enable surround sound audio?"
2019-02-02 03:09:47 -08:00
Basic.Settings.Audio.Devices = "Devices"
Basic.Settings.Audio.DesktopDevice = "Desktop Audio"
Basic.Settings.Audio.DesktopDevice2 = "Desktop Audio 2"
Basic.Settings.Audio.AuxDevice = "Mic/Auxiliary Audio"
Basic.Settings.Audio.AuxDevice2 = "Mic/Auxiliary Audio 2"
Basic.Settings.Audio.AuxDevice3 = "Mic/Auxiliary Audio 3"
Basic.Settings.Audio.AuxDevice4 = "Mic/Auxiliary Audio 4"
2015-04-30 22:07:42 -07:00
Basic.Settings.Audio.EnablePushToMute = "Enable Push-to-mute"
Basic.Settings.Audio.PushToMuteDelay = "Push-to-mute delay"
Basic.Settings.Audio.EnablePushToTalk = "Enable Push-to-talk"
Basic.Settings.Audio.PushToTalkDelay = "Push-to-talk delay"
2016-01-23 01:20:57 -08:00
Basic.Settings.Audio.UnknownAudioDevice = "[Device not connected or not available]"
2019-02-25 14:06:10 -08:00
Basic.Settings.Audio.Disabled = "Disabled"
2014-12-28 00:38:00 -08:00
2015-02-11 12:55:06 -08:00
# basic mode 'advanced' settings
Basic.Settings.Advanced = "Advanced"
2016-07-01 10:27:27 -07:00
Basic.Settings.Advanced.General.ProcessPriority = "Process Priority"
Basic.Settings.Advanced.General.ProcessPriority.High = "High"
Basic.Settings.Advanced.General.ProcessPriority.AboveNormal = "Above Normal"
Basic.Settings.Advanced.General.ProcessPriority.Normal = "Normal"
2017-07-26 14:44:58 -07:00
Basic.Settings.Advanced.General.ProcessPriority.BelowNormal = "Below Normal"
2016-07-01 10:27:27 -07:00
Basic.Settings.Advanced.General.ProcessPriority.Idle = "Idle"
2019-04-08 07:02:32 -07:00
Basic.Settings.Advanced.FormatWarning = "Warning: Color formats other than NV12 are primarily intended for recording, and are not recommended when streaming. Streaming may incur increased CPU usage due to color format conversion."
2015-02-11 12:55:06 -08:00
Basic.Settings.Advanced.Audio.BufferingTime = "Audio Buffering Time"
Basic.Settings.Advanced.Video.ColorFormat = "Color Format"
2019-04-22 23:38:26 -07:00
Basic.Settings.Advanced.Video.ColorSpace = "Color Space"
Basic.Settings.Advanced.Video.ColorRange = "Color Range"
2015-02-11 12:55:06 -08:00
Basic.Settings.Advanced.Video.ColorRange.Partial = "Partial"
Basic.Settings.Advanced.Video.ColorRange.Full = "Full"
2019-02-02 03:09:47 -08:00
Basic.Settings.Advanced.Audio.MonitoringDevice = "Monitoring Device"
2017-02-05 21:51:50 -08:00
Basic.Settings.Advanced.Audio.MonitoringDevice.Default = "Default"
2017-04-17 06:38:16 -07:00
Basic.Settings.Advanced.Audio.DisableAudioDucking = "Disable Windows audio ducking"
2015-09-06 16:12:03 -07:00
Basic.Settings.Advanced.StreamDelay = "Stream Delay"
2019-07-18 00:38:50 -07:00
Basic.Settings.Advanced.StreamDelay.Duration = "Duration"
2015-09-06 16:12:03 -07:00
Basic.Settings.Advanced.StreamDelay.Preserve = "Preserve cutoff point (increase delay) when reconnecting"
Basic.Settings.Advanced.StreamDelay.MemoryUsage = "Estimated Memory Usage: %1 MB"
2016-07-29 08:30:54 -07:00
Basic.Settings.Advanced.Network = "Network"
Basic.Settings.Advanced.Network.BindToIP = "Bind to IP"
2019-10-08 02:21:19 -07:00
Basic.Settings.Advanced.Network.EnableNewSocketLoop = "Enable network optimizations"
Basic.Settings.Advanced.Network.EnableLowLatencyMode = "Enable TCP pacing"
Basic.Settings.Advanced.Network.TCPPacing.Tooltip = "Attempts to make RTMP output friendlier to other latency sensitive applications on the network by regulating the rate of transmission.\nIt may increase the risk of dropped frames on unstable connections."
2019-07-22 01:20:12 -07:00
Basic.Settings.Advanced.Hotkeys.HotkeyFocusBehavior = "Hotkey Focus Behavior"
Basic.Settings.Advanced.Hotkeys.NeverDisableHotkeys = "Never disable hotkeys"
2018-05-06 16:48:27 -07:00
Basic.Settings.Advanced.Hotkeys.DisableHotkeysInFocus = "Disable hotkeys when main window is in focus"
2019-07-22 01:20:12 -07:00
Basic.Settings.Advanced.Hotkeys.DisableHotkeysOutOfFocus = "Disable hotkeys when main window is not in focus"
2017-05-08 04:53:35 -07:00
Basic.Settings.Advanced.AutoRemux = "Automatically remux to mp4"
Basic.Settings.Advanced.AutoRemux.MP4 = "(record as mkv)"
2015-02-11 12:55:06 -08:00
2014-12-28 00:38:00 -08:00
# advanced audio properties
Basic.AdvAudio = "Advanced Audio Properties"
2019-12-26 10:20:12 -08:00
Basic.AdvAudio.ActiveOnly = "Active Sources Only"
2014-12-28 00:38:00 -08:00
Basic.AdvAudio.Name = "Name"
2019-04-27 22:21:19 -07:00
Basic.AdvAudio.Volume = "Volume"
2019-07-17 10:21:50 -07:00
Basic.AdvAudio.Mono = "Mono"
2017-10-08 03:15:28 -07:00
Basic.AdvAudio.Balance = "Balance"
2019-07-18 00:38:50 -07:00
Basic.AdvAudio.SyncOffset = "Sync Offset"
2017-02-05 21:51:50 -08:00
Basic.AdvAudio.Monitoring = "Audio Monitoring"
Basic.AdvAudio.Monitoring.None = "Monitor Off"
Basic.AdvAudio.Monitoring.MonitorOnly = "Monitor Only (mute output)"
Basic.AdvAudio.Monitoring.Both = "Monitor and Output"
2015-01-16 07:58:13 -08:00
Basic.AdvAudio.AudioTracks = "Tracks"
2014-11-01 13:48:58 -07:00
2014-11-01 13:50:36 -07:00
# basic mode 'hotkeys' settings
Basic.Settings.Hotkeys = "Hotkeys"
Basic.Settings.Hotkeys.Pair = "Key combinations shared with '%1' act as toggles"
2018-09-09 14:31:04 -07:00
Basic.Settings.Hotkeys.Filter = "Filter"
2014-11-01 13:50:36 -07:00
2014-11-01 13:53:05 -07:00
# basic mode hotkeys
Basic.Hotkeys.SelectScene = "Switch to scene"
2016-08-13 07:36:17 -07:00
# system tray
Basic.SystemTray.Show = "Show"
Basic.SystemTray.Hide = "Hide"
# system tray messages
2019-04-08 07:02:32 -07:00
Basic.SystemTray.Message.Reconnecting = "Disconnected. Reconnecting..."
2016-08-13 07:36:17 -07:00
2014-11-01 13:48:58 -07:00
# hotkeys that may lack translation on certain operating systems
Hotkeys.Insert = "Insert"
Hotkeys.Delete = "Delete"
Hotkeys.Home = "Home"
Hotkeys.End = "End"
Hotkeys.PageUp = "Page Up"
Hotkeys.PageDown = "Page Down"
Hotkeys.NumLock = "Num Lock"
Hotkeys.ScrollLock = "Scroll Lock"
Hotkeys.CapsLock = "Caps Lock"
Hotkeys.Backspace = "Backspace"
Hotkeys.Tab = "Tab"
Hotkeys.Print = "Print"
Hotkeys.Pause = "Pause"
Hotkeys.Left = "Left"
Hotkeys.Right = "Right"
Hotkeys.Up = "Up"
Hotkeys.Down = "Down"
Hotkeys.Windows = "Windows"
Hotkeys.Super = "Super"
Hotkeys.Menu = "Menu"
Hotkeys.Space = "Space"
Hotkeys.NumpadNum = "Numpad %1"
Hotkeys.NumpadMultiply = "Numpad Multiply"
Hotkeys.NumpadDivide = "Numpad Divide"
Hotkeys.NumpadAdd = "Numpad Add"
Hotkeys.NumpadSubtract = "Numpad Subtract"
Hotkeys.NumpadDecimal = "Numpad Decimal"
Hotkeys.AppleKeypadNum = "%1 (Keypad)"
Hotkeys.AppleKeypadMultiply = "* (Keypad)"
Hotkeys.AppleKeypadDivide = "/ (Keypad)"
Hotkeys.AppleKeypadAdd = "+ (Keypad)"
Hotkeys.AppleKeypadSubtract = "- (Keypad)"
Hotkeys.AppleKeypadDecimal = ". (Keypad)"
Hotkeys.AppleKeypadEqual = "= (Keypad)"
Hotkeys.MouseButton = "Mouse %1"
2019-03-31 03:09:43 -07:00
Hotkeys.Escape = "Esc"
2014-11-01 13:48:58 -07:00
# audio hotkeys
Mute = "Mute"
Unmute = "Unmute"
2015-04-30 22:07:42 -07:00
Push-to-mute = "Push-to-mute"
2014-11-01 13:48:58 -07:00
Push-to-talk = "Push-to-talk"
# scene item hotkeys
SceneItemShow = "Show '%1'"
SceneItemHide = "Hide '%1'"
2015-06-17 12:07:55 -07:00
# Output warnings
OutputWarnings.NoTracksSelected = "You must select at least one track"
2019-03-11 22:23:41 -07:00
OutputWarnings.MP4Recording = "Warning: Recordings saved to MP4/MOV will be unrecoverable if the file cannot be finalized (e.g. as a result of BSODs, power losses, etc.). If you want to record multiple audio tracks consider using MKV and remux the recording to MP4/MOV after it is finished (File → Remux Recordings)"
2019-07-07 15:47:29 -07:00
OutputWarnings.CannotPause = "Warning: Recordings cannot be paused if the recording encoder is set to \"(Use stream encoder)\""
2017-03-13 10:17:01 -07:00
# deleting final scene
FinalScene.Title = "Delete Scene"
FinalScene.Text = "There needs to be at least one scene."
2018-06-26 17:37:21 -07:00
# no sources
NoSources.Title = "No Sources"
NoSources.Text = "It looks like you haven't added any video sources yet, so you will only be outputting a blank screen. Are you sure you want to do this?"
NoSources.Text.AddSource = "You can add sources by clicking the + icon under the Sources box in the main window at any time."
2019-03-20 21:29:04 -07:00
NoSources.Label = "You don't have any sources.\nClick the + button below,\nor right click here to add one."
2018-08-01 13:23:12 -07:00
# Scene item color selection
ChangeBG = "Set Color"
CustomColor = "Custom Color"
2018-08-10 06:12:16 -07:00
# Global settings for the browser source
BrowserSource.EnableHardwareAcceleration = "Enable Browser Source Hardware Acceleration"
2018-08-17 23:13:20 -07:00
# about dialog
About = "About"
About.Info = "OBS Studio is a free and open source video recording and live streaming software."
2019-02-24 15:28:08 -08:00
About.Donate = "Make a Contribution"
2018-08-17 23:13:20 -07:00
About.GetInvolved = "Get Involved"
About.Authors = "Authors"
About.License = "License"
2019-02-24 15:28:08 -08:00
About.Contribute = "Support the OBS Project"
2018-08-29 15:45:59 -07:00
2019-03-04 15:42:02 -08:00
# Drag-drop URL
AddUrl.Title = "Add Source via URL"
AddUrl.Text = "You have dragged a URL into OBS. This will automatically add the link as a source. Continue?"
AddUrl.Text.Url = "URL: %1"
2018-08-29 15:45:59 -07:00
# Dynamic output size
ResizeOutputSizeOfSource = "Resize output (source size)"
2018-09-27 16:46:41 -07:00
ResizeOutputSizeOfSource.Text = "The base and output resolutions will be resized to the size of the current source."
2018-08-29 15:45:59 -07:00
ResizeOutputSizeOfSource.Continue = "Do you want to continue?"
2019-05-11 22:13:38 -07:00
PreviewTransition = "Preview Transition"
