obs-studio/libobs/obs-encoder.c

659 lines
17 KiB
C
Raw Normal View History

/******************************************************************************
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
Copyright (C) 2013-2014 by Hugh Bailey <obs.jim@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
******************************************************************************/
#include "obs.h"
#include "obs-internal.h"
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
static inline struct obs_encoder_info *get_encoder_info(const char *id)
{
for (size_t i = 0; i < obs->encoder_types.num; i++) {
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
struct obs_encoder_info *info = obs->encoder_types.array+i;
if (strcmp(info->id, id) == 0)
return info;
}
return NULL;
}
const char *obs_encoder_getdisplayname(const char *id, const char *locale)
{
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
struct obs_encoder_info *ei = get_encoder_info(id);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
return ei ? ei->getname(locale) : NULL;
}
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
static bool init_encoder(struct obs_encoder *encoder, const char *name,
obs_data_t settings)
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
{
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
pthread_mutex_init_value(&encoder->callbacks_mutex);
pthread_mutex_init_value(&encoder->outputs_mutex);
if (!obs_context_data_init(&encoder->context, settings, name))
return false;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
if (pthread_mutex_init(&encoder->callbacks_mutex, NULL) != 0)
return false;
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
if (pthread_mutex_init(&encoder->outputs_mutex, NULL) != 0)
return false;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
if (encoder->info.defaults)
encoder->info.defaults(encoder->context.settings);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
return true;
}
static struct obs_encoder *create_encoder(const char *id,
enum obs_encoder_type type, const char *name,
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
obs_data_t settings, void *media,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
uint32_t timebase_num, uint32_t timebase_den)
{
struct obs_encoder *encoder;
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
struct obs_encoder_info *ei = get_encoder_info(id);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
bool success;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
if (!ei || ei->type != type)
return NULL;
encoder = bzalloc(sizeof(struct obs_encoder));
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder->info = *ei;
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
encoder->media = media;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder->timebase_num = timebase_num;
encoder->timebase_den = timebase_den;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
success = init_encoder(encoder, name, settings);
if (!success) {
obs_encoder_destroy(encoder);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder = NULL;
}
obs_context_data_insert(&encoder->context,
&obs->data.encoders_mutex,
&obs->data.first_encoder);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
return encoder;
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
obs_encoder_t obs_video_encoder_create(const char *id, const char *name,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
obs_data_t settings, video_t video)
{
const struct video_output_info *voi;
if (!name || !id || !video)
return NULL;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
voi = video_output_getinfo(video);
return create_encoder(id, OBS_ENCODER_VIDEO, name, settings, video,
voi->fps_den, voi->fps_num);
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
obs_encoder_t obs_audio_encoder_create(const char *id, const char *name,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
obs_data_t settings, audio_t audio)
{
const struct audio_output_info *aoi;
if (!name || !id || !audio)
return NULL;
aoi = audio_output_getinfo(audio);
return create_encoder(id, OBS_ENCODER_AUDIO, name, settings, audio,
1, aoi->samples_per_sec);
}
static void receive_video(void *param, struct video_data *frame);
static void receive_audio(void *param, struct audio_data *data);
static inline struct audio_convert_info *get_audio_info(
struct obs_encoder *encoder, struct audio_convert_info *info)
{
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
const struct audio_output_info *aoi;
aoi = audio_output_getinfo(encoder->media);
memset(info, 0, sizeof(struct audio_convert_info));
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
if (encoder->info.audio_info)
encoder->info.audio_info(encoder->context.data, info);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
if (info->format == AUDIO_FORMAT_UNKNOWN)
info->format = aoi->format;
if (!info->samples_per_sec)
info->samples_per_sec = aoi->samples_per_sec;
if (info->speakers == SPEAKERS_UNKNOWN)
info->speakers = aoi->speakers;
return info;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
static inline struct video_scale_info *get_video_info(
struct obs_encoder *encoder, struct video_scale_info *info)
{
if (encoder->info.video_info)
if (encoder->info.video_info(encoder->context.data, info))
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
return info;
return NULL;
}
static void add_connection(struct obs_encoder *encoder)
{
struct audio_convert_info audio_info = {0};
struct video_scale_info video_info = {0};
if (encoder->info.type == OBS_ENCODER_AUDIO) {
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
get_audio_info(encoder, &audio_info);
audio_output_connect(encoder->media, &audio_info, receive_audio,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder);
} else {
struct video_scale_info *info = NULL;
info = get_video_info(encoder, &video_info);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
video_output_connect(encoder->media, info, receive_video,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder);
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
encoder->active = true;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
static void remove_connection(struct obs_encoder *encoder)
{
if (encoder->info.type == OBS_ENCODER_AUDIO)
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
audio_output_disconnect(encoder->media, receive_audio,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder);
else
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
video_output_disconnect(encoder->media, receive_video,
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
encoder->active = false;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
static inline void free_audio_buffers(struct obs_encoder *encoder)
{
for (size_t i = 0; i < MAX_AV_PLANES; i++) {
circlebuf_free(&encoder->audio_input_buffer[i]);
bfree(encoder->audio_output_buffer[i]);
encoder->audio_output_buffer[i] = NULL;
}
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
static void obs_encoder_actually_destroy(obs_encoder_t encoder)
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
{
if (encoder) {
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
pthread_mutex_lock(&encoder->outputs_mutex);
for (size_t i = 0; i < encoder->outputs.num; i++) {
struct obs_output *output = encoder->outputs.array[i];
obs_output_remove_encoder(output, encoder);
}
da_free(encoder->outputs);
pthread_mutex_unlock(&encoder->outputs_mutex);
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
free_audio_buffers(encoder);
if (encoder->context.data)
encoder->info.destroy(encoder->context.data);
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
da_free(encoder->callbacks);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
pthread_mutex_destroy(&encoder->callbacks_mutex);
pthread_mutex_destroy(&encoder->outputs_mutex);
obs_context_data_free(&encoder->context);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
bfree(encoder);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
/* does not actually destroy the encoder until all connections to it have been
* removed. (full reference counting really would have been superfluous) */
void obs_encoder_destroy(obs_encoder_t encoder)
{
if (encoder) {
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
bool destroy;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
obs_context_data_remove(&encoder->context);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
pthread_mutex_lock(&encoder->callbacks_mutex);
destroy = encoder->callbacks.num == 0;
if (!destroy)
encoder->destroy_on_stop = true;
pthread_mutex_unlock(&encoder->callbacks_mutex);
if (destroy)
obs_encoder_actually_destroy(encoder);
}
}
static inline obs_data_t get_defaults(const struct obs_encoder_info *info)
{
obs_data_t settings = obs_data_create();
if (info->defaults)
info->defaults(settings);
return settings;
}
obs_data_t obs_encoder_defaults(const char *id)
{
const struct obs_encoder_info *info = get_encoder_info(id);
return (info) ? get_defaults(info) : NULL;
}
Add source properties window (very preliminary) - Add a properties window for sources so that you can now actually edit the settings for sources. Also, display the source by itself in the window (Note: not working on mac, and possibly not working on linux). When changing the settings for a source, it will call obs_source_update on that source when you have modified any values automatically. - Add a properties 'widget', eventually I want to turn this in to a regular nice properties view like you'd see in the designer, but right now it just uses a form layout in a QScrollArea with regular controls to display the properties. It's clunky but works for the time being. - Make it so that swap chains and the main graphics subsystem will automatically use at least one backbuffer if none was specified - Fix bug where displays weren't added to the main display array - Make it so that you can get the properties of a source via the actual pointer of a source/encoder/output in addition to being able to look up properties via identifier. - When registering source types, check for required functions (wasn't doing it before). getheight/getwidth should not be optional if it's a video source as well. - Add an RAII OBSObj wrapper to obs.hpp for non-reference-counted libobs pointers - Add an RAII OBSSignal wrapper to obs.hpp for libobs signals to automatically disconnect them on destruction - Move the "scale and center" calculation in window-basic-main.cpp to its own function and in its own source file - Add an 'update' callback to WASAPI audio sources
2014-03-23 01:07:54 -07:00
obs_properties_t obs_get_encoder_properties(const char *id, const char *locale)
{
Revamp API and start using doxygen The API used to be designed in such a way to where it would expect exports for each individual source/output/encoder/etc. You would export functions for each and it would automatically load those functions based on a specific naming scheme from the module. The idea behind this was that I wanted to limit the usage of structures in the API so only functions could be used. It was an interesting idea in theory, but this idea turned out to be flawed in a number of ways: 1.) Requiring exports to create sources/outputs/encoders/etc meant that you could not create them by any other means, which meant that things like faruton's .net plugin would become difficult. 2.) Export function declarations could not be checked, therefore if you created a function with the wrong parameters and parameter types, the compiler wouldn't know how to check for that. 3.) Required overly complex load functions in libobs just to handle it. It makes much more sense to just have a load function that you call manually. Complexity is the bane of all good programs. 4.) It required that you have functions of specific names, which looked and felt somewhat unsightly. So, to fix these issues, I replaced it with a more commonly used API scheme, seen commonly in places like kernels and typical C libraries with abstraction. You simply create a structure that contains the callback definitions, and you pass it to a function to register that definition (such as obs_register_source), which you call in the obs_module_load of the module. It will also automatically check the structure size and ensure that it only loads the required values if the structure happened to add new values in an API change. The "main" source file for each module must include obs-module.h, and must use OBS_DECLARE_MODULE() within that source file. Also, started writing some doxygen documentation in to the main library headers. Will add more detailed documentation as I go.
2014-02-12 07:04:50 -08:00
const struct obs_encoder_info *ei = get_encoder_info(id);
if (ei && ei->properties) {
obs_data_t defaults = get_defaults(ei);
obs_properties_t properties;
properties = ei->properties(locale);
obs_properties_apply_settings(properties, defaults);
obs_data_release(defaults);
return properties;
}
return NULL;
}
Add source properties window (very preliminary) - Add a properties window for sources so that you can now actually edit the settings for sources. Also, display the source by itself in the window (Note: not working on mac, and possibly not working on linux). When changing the settings for a source, it will call obs_source_update on that source when you have modified any values automatically. - Add a properties 'widget', eventually I want to turn this in to a regular nice properties view like you'd see in the designer, but right now it just uses a form layout in a QScrollArea with regular controls to display the properties. It's clunky but works for the time being. - Make it so that swap chains and the main graphics subsystem will automatically use at least one backbuffer if none was specified - Fix bug where displays weren't added to the main display array - Make it so that you can get the properties of a source via the actual pointer of a source/encoder/output in addition to being able to look up properties via identifier. - When registering source types, check for required functions (wasn't doing it before). getheight/getwidth should not be optional if it's a video source as well. - Add an RAII OBSObj wrapper to obs.hpp for non-reference-counted libobs pointers - Add an RAII OBSSignal wrapper to obs.hpp for libobs signals to automatically disconnect them on destruction - Move the "scale and center" calculation in window-basic-main.cpp to its own function and in its own source file - Add an 'update' callback to WASAPI audio sources
2014-03-23 01:07:54 -07:00
obs_properties_t obs_encoder_properties(obs_encoder_t encoder,
const char *locale)
{
if (encoder && encoder->info.properties) {
obs_properties_t props;
props = encoder->info.properties(locale);
obs_properties_apply_settings(props, encoder->context.settings);
return props;
}
Add source properties window (very preliminary) - Add a properties window for sources so that you can now actually edit the settings for sources. Also, display the source by itself in the window (Note: not working on mac, and possibly not working on linux). When changing the settings for a source, it will call obs_source_update on that source when you have modified any values automatically. - Add a properties 'widget', eventually I want to turn this in to a regular nice properties view like you'd see in the designer, but right now it just uses a form layout in a QScrollArea with regular controls to display the properties. It's clunky but works for the time being. - Make it so that swap chains and the main graphics subsystem will automatically use at least one backbuffer if none was specified - Fix bug where displays weren't added to the main display array - Make it so that you can get the properties of a source via the actual pointer of a source/encoder/output in addition to being able to look up properties via identifier. - When registering source types, check for required functions (wasn't doing it before). getheight/getwidth should not be optional if it's a video source as well. - Add an RAII OBSObj wrapper to obs.hpp for non-reference-counted libobs pointers - Add an RAII OBSSignal wrapper to obs.hpp for libobs signals to automatically disconnect them on destruction - Move the "scale and center" calculation in window-basic-main.cpp to its own function and in its own source file - Add an 'update' callback to WASAPI audio sources
2014-03-23 01:07:54 -07:00
return NULL;
}
void obs_encoder_update(obs_encoder_t encoder, obs_data_t settings)
{
if (!encoder) return;
obs_data_apply(encoder->context.settings, settings);
if (encoder->info.update && encoder->context.data)
encoder->info.update(encoder->context.data,
encoder->context.settings);
}
bool obs_encoder_get_extra_data(obs_encoder_t encoder, uint8_t **extra_data,
size_t *size)
{
if (encoder && encoder->info.extra_data && encoder->context.data)
return encoder->info.extra_data(encoder->context.data,
extra_data, size);
return false;
}
obs_data_t obs_encoder_get_settings(obs_encoder_t encoder)
{
if (!encoder) return NULL;
obs_data_addref(encoder->context.settings);
return encoder->context.settings;
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
static inline void reset_audio_buffers(struct obs_encoder *encoder)
{
free_audio_buffers(encoder);
for (size_t i = 0; i < encoder->planes; i++)
encoder->audio_output_buffer[i] =
bmalloc(encoder->framesize_bytes);
}
static void intitialize_audio_encoder(struct obs_encoder *encoder)
{
struct audio_convert_info info;
get_audio_info(encoder, &info);
encoder->samplerate = info.samples_per_sec;
encoder->planes = get_audio_planes(info.format, info.speakers);
encoder->blocksize = get_audio_size(info.format, info.speakers, 1);
encoder->framesize = encoder->info.frame_size(encoder->context.data);
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
encoder->framesize_bytes = encoder->blocksize * encoder->framesize;
reset_audio_buffers(encoder);
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
bool obs_encoder_initialize(obs_encoder_t encoder)
{
if (!encoder) return false;
if (encoder->active)
return true;
if (encoder->context.data)
encoder->info.destroy(encoder->context.data);
encoder->context.data = encoder->info.create(encoder->context.settings,
encoder);
if (!encoder->context.data)
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
return false;
encoder->paired_encoder = NULL;
encoder->start_ts = 0;
if (encoder->info.type == OBS_ENCODER_AUDIO)
intitialize_audio_encoder(encoder);
return true;
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
}
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
static inline size_t get_callback_idx(
struct obs_encoder *encoder,
void (*new_packet)(void *param, struct encoder_packet *packet),
void *param)
{
for (size_t i = 0; i < encoder->callbacks.num; i++) {
struct encoder_callback *cb = encoder->callbacks.array+i;
if (cb->new_packet == new_packet && cb->param == param)
return i;
}
return DARRAY_INVALID;
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
void obs_encoder_start(obs_encoder_t encoder,
void (*new_packet)(void *param, struct encoder_packet *packet),
void *param)
{
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
struct encoder_callback cb = {false, new_packet, param};
bool first = false;
if (!encoder || !new_packet || !encoder->context.data) return;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
pthread_mutex_lock(&encoder->callbacks_mutex);
first = (encoder->callbacks.num == 0);
size_t idx = get_callback_idx(encoder, new_packet, param);
if (idx == DARRAY_INVALID)
da_push_back(encoder->callbacks, &cb);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
pthread_mutex_unlock(&encoder->callbacks_mutex);
if (first) {
encoder->cur_pts = 0;
add_connection(encoder);
}
}
void obs_encoder_stop(obs_encoder_t encoder,
void (*new_packet)(void *param, struct encoder_packet *packet),
void *param)
{
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
bool last = false;
size_t idx;
if (!encoder) return;
pthread_mutex_lock(&encoder->callbacks_mutex);
idx = get_callback_idx(encoder, new_packet, param);
if (idx != DARRAY_INVALID) {
da_erase(encoder->callbacks, idx);
last = (encoder->callbacks.num == 0);
}
pthread_mutex_unlock(&encoder->callbacks_mutex);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
if (last) {
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
remove_connection(encoder);
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
if (encoder->destroy_on_stop)
obs_encoder_actually_destroy(encoder);
}
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
const char *obs_encoder_get_codec(obs_encoder_t encoder)
{
return encoder ? encoder->info.codec : NULL;
}
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
video_t obs_encoder_video(obs_encoder_t encoder)
{
return (encoder && encoder->info.type == OBS_ENCODER_VIDEO) ?
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
encoder->media : NULL;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
audio_t obs_encoder_audio(obs_encoder_t encoder)
{
return (encoder && encoder->info.type == OBS_ENCODER_AUDIO) ?
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
encoder->media : NULL;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
static inline bool get_sei(struct obs_encoder *encoder,
uint8_t **sei, size_t *size)
{
if (encoder->info.sei_data)
return encoder->info.sei_data(encoder->context.data, sei, size);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
return false;
}
static void send_first_video_packet(struct obs_encoder *encoder,
struct encoder_callback *cb, struct encoder_packet *packet)
{
struct encoder_packet first_packet;
DARRAY(uint8_t) data;
uint8_t *sei;
size_t size;
/* always wait for first keyframe */
if (!packet->keyframe)
return;
da_init(data);
if (!get_sei(encoder, &sei, &size)) {
cb->new_packet(cb->param, packet);
return;
}
da_push_back_array(data, sei, size);
da_push_back_array(data, packet->data, packet->size);
first_packet = *packet;
first_packet.data = data.array;
first_packet.size = data.num;
cb->new_packet(cb->param, &first_packet);
cb->sent_first_packet = true;
da_free(data);
}
static inline void send_packet(struct obs_encoder *encoder,
struct encoder_callback *cb, struct encoder_packet *packet)
{
/* include SEI in first video packet */
if (encoder->info.type == OBS_ENCODER_VIDEO && !cb->sent_first_packet)
send_first_video_packet(encoder, cb, packet);
else
cb->new_packet(cb->param, packet);
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
static void full_stop(struct obs_encoder *encoder)
{
if (encoder) {
pthread_mutex_lock(&encoder->callbacks_mutex);
da_free(encoder->callbacks);
remove_connection(encoder);
pthread_mutex_unlock(&encoder->callbacks_mutex);
}
}
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
static inline void do_encode(struct obs_encoder *encoder,
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
struct encoder_frame *frame)
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
{
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
struct encoder_packet pkt = {0};
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
bool received = false;
bool success;
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
pkt.timebase_num = encoder->timebase_num;
pkt.timebase_den = encoder->timebase_den;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
success = encoder->info.encode(encoder->context.data, frame, &pkt,
&received);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
if (!success) {
full_stop(encoder);
blog(LOG_ERROR, "Error encoding with encoder '%s'",
encoder->context.name);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
return;
}
if (received) {
/* we use system time here to ensure sync with other encoders,
* you do not want to use relative timestamps here */
pkt.dts_usec = encoder->start_ts / 1000 + packet_dts_usec(&pkt);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
pthread_mutex_lock(&encoder->callbacks_mutex);
for (size_t i = 0; i < encoder->callbacks.num; i++) {
struct encoder_callback *cb;
cb = encoder->callbacks.array+i;
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
send_packet(encoder, cb, &pkt);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
pthread_mutex_unlock(&encoder->callbacks_mutex);
}
}
static void receive_video(void *param, struct video_data *frame)
{
struct obs_encoder *encoder = param;
struct encoder_frame enc_frame;
memset(&enc_frame, 0, sizeof(struct encoder_frame));
for (size_t i = 0; i < MAX_AV_PLANES; i++) {
enc_frame.data[i] = frame->data[i];
enc_frame.linesize[i] = frame->linesize[i];
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
if (!encoder->start_ts)
encoder->start_ts = frame->timestamp;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
enc_frame.frames = 1;
enc_frame.pts = encoder->cur_pts;
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
do_encode(encoder, &enc_frame);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
encoder->cur_pts += encoder->timebase_num;
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
static bool buffer_audio(struct obs_encoder *encoder, struct audio_data *data)
{
size_t samplerate = encoder->samplerate;
size_t size = data->frames * encoder->blocksize;
size_t offset_size = 0;
if (encoder->paired_encoder && !encoder->start_ts) {
uint64_t end_ts = data->timestamp;
uint64_t v_start_ts = encoder->paired_encoder->start_ts;
/* no video yet, so don't start audio */
if (!v_start_ts)
return false;
/* audio starting point still not synced with video starting
* point, so don't start audio */
end_ts += (uint64_t)data->frames * 1000000000ULL / samplerate;
if (end_ts <= v_start_ts)
return false;
/* ready to start audio, truncate if necessary */
if (data->timestamp < v_start_ts) {
uint64_t offset = v_start_ts - data->timestamp;
offset = (int)(offset * samplerate / 1000000000);
offset_size = (size_t)offset * encoder->blocksize;
}
encoder->start_ts = v_start_ts;
}
size -= offset_size;
/* push in to the circular buffer */
if (size)
for (size_t i = 0; i < encoder->planes; i++)
circlebuf_push_back(&encoder->audio_input_buffer[i],
data->data[i] + offset_size, size);
return true;
}
static void send_audio_data(struct obs_encoder *encoder)
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
{
struct encoder_frame enc_frame;
memset(&enc_frame, 0, sizeof(struct encoder_frame));
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
for (size_t i = 0; i < encoder->planes; i++) {
circlebuf_pop_front(&encoder->audio_input_buffer[i],
encoder->audio_output_buffer[i],
encoder->framesize_bytes);
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
enc_frame.data[i] = encoder->audio_output_buffer[i];
enc_frame.linesize[i] = (uint32_t)encoder->framesize_bytes;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
}
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
enc_frame.frames = (uint32_t)encoder->framesize;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
enc_frame.pts = encoder->cur_pts;
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
do_encode(encoder, &enc_frame);
encoder->cur_pts += encoder->framesize;
}
static void receive_audio(void *param, struct audio_data *data)
{
struct obs_encoder *encoder = param;
if (!buffer_audio(encoder, data))
return;
Implement encoder interface (still preliminary) - Implement OBS encoder interface. It was previously incomplete, but now is reaching some level of completion, though probably should still be considered preliminary. I had originally implemented it so that encoders only have a 'reset' function to reset their parameters, but I felt that having both a 'start' and 'stop' function would be useful. Encoders are now assigned to a specific video/audio media output each rather than implicitely assigned to the main obs video/audio contexts. This allows separate encoder contexts that aren't necessarily assigned to the main video/audio context (which is useful for things such as recording specific sources). Will probably have to do this for regular obs outputs as well. When creating an encoder, you must now explicitely state whether that encoder is an audio or video encoder. Audio and video can optionally be automatically converted depending on what the encoder specifies. When something 'attaches' to an encoder, the first attachment starts the encoder, and the encoder automatically attaches to the media output context associated with it. Subsequent attachments won't have the same effect, they will just start receiving the same encoder data when the next keyframe plays (along with SEI if any). When detaching from the encoder, the last detachment will fully stop the encoder and detach the encoder from the media output context associated with the encoder. SEI must actually be exported separately; because new encoder attachments may not always be at the beginning of the stream, the first keyframe they get must have that SEI data in it. If the encoder has SEI data, it needs only add one small function to simply query that SEI data, and then that data will be handled automatically by libobs for all subsequent encoder attachments. - Implement x264 encoder plugin, move x264 files to separate plugin to separate necessary dependencies. - Change video/audio frame output structures to not use const qualifiers to prevent issues with non-const function usage elsewhere. This was an issue when writing the x264 encoder, as the x264 encoder expects non-const frame data. Change stagesurf_map to return a non-const data type to prevent this as well. - Change full range parameter of video scaler to be an enum rather than boolean
2014-03-16 16:21:34 -07:00
Implement RTMP module (still needs drop code) - Implement the RTMP output module. This time around, we just use a simple FLV muxer, then just write to the stream with RTMP_Write. Easy and effective. - Fix the FLV muxer, the muxer now outputs proper FLV packets. - Output API: * When using encoders, automatically interleave encoded packets before sending it to the output. * Pair encoders and have them automatically wait for the other to start to ensure sync. * Change 'obs_output_signal_start_fail' to 'obs_output_signal_stop' because it was a bit confusing, and doing this makes a lot more sense for outputs that need to stop suddenly (disconnections/etc). - Encoder API: * Remove some unnecessary encoder functions from the actual API and make them internal. Most of the encoder functions are handled automatically by outputs anyway, so there's no real need to expose them and end up inadvertently confusing plugin writers. * Have audio encoders wait for the video encoder to get a frame, then start at the exact data point that the first video frame starts to ensure the most accrate sync of video/audio possible. * Add a required 'frame_size' callback for audio encoders that returns the expected number of frames desired to encode with. This way, the libobs encoder API can handle the circular buffering internally automatically for the encoder modules, so encoder writers don't have to do it themselves. - Fix a few bugs in the serializer interface. It was passing the wrong variable for the data in a few cases. - If a source has video, make obs_source_update defer the actual update callback until the tick function is called to prevent threading issues.
2014-04-07 22:00:10 -07:00
while (encoder->audio_input_buffer[0].size >= encoder->framesize_bytes)
send_audio_data(encoder);
}
Implement encoder usage with outputs - Make it so that encoders can be assigned to outputs. If an encoder is destroyed, it will automatically remove itself from that output. I specifically didn't want to do reference counting because it leaves too much potential for unchecked references and it just felt like it would be more trouble than it's worth. - Add a 'flags' value to the output definition structure. This lets the output specify if it uses video/audio, and whether the output is meant to be used with OBS encoders or not. - Remove boilerplate code for outputs. This makes it easier to program outputs. The boilerplate code involved before was mostly just involving connecting to the audio/video data streams directly in each output plugin. Instead of doing that, simply add plugin callback functions for receiving video/audio (either encoded or non-encoded, whichever it's set to use), and then call obs_output_begin_data_capture and obs_output_end_data_capture to automatically handle setting up connections to raw or encoded video/audio streams for the plugin. - Remove 'active' function from output callbacks, as it's no longer really needed now that the libobs output context automatically knows when the output is active or not. - Make it so that an encoder cannot be destroyed until all data connections to the encoder have been removed. - Change the 'start' and 'stop' functions in the encoder interface to just an 'initialize' callback, which initializes the encoder. - Make it so that the encoder must be initialized first before the data stream can be started. The reason why initialization was separated from starting the encoder stream was because we need to be able to check that the settings used with the encoder *can* be used first. This problem was especially annoying if you had both video/audio encoding. Before, you'd have to check the return value from obs_encoder_start, and if that second encoder fails, then you basically had to stop the first encoder again, making for unnecessary boilerplate code whenever starting up two encoders.
2014-03-27 21:50:15 -07:00
void obs_encoder_add_output(struct obs_encoder *encoder,
struct obs_output *output)
{
if (!encoder) return;
pthread_mutex_lock(&encoder->outputs_mutex);
da_push_back(encoder->outputs, &output);
pthread_mutex_unlock(&encoder->outputs_mutex);
}
void obs_encoder_remove_output(struct obs_encoder *encoder,
struct obs_output *output)
{
if (!encoder) return;
pthread_mutex_lock(&encoder->outputs_mutex);
da_erase_item(encoder->outputs, &output);
pthread_mutex_unlock(&encoder->outputs_mutex);
}
void obs_duplicate_encoder_packet(struct encoder_packet *dst,
const struct encoder_packet *src)
{
*dst = *src;
dst->data = bmemdup(src->data, src->size);
}
void obs_free_encoder_packet(struct encoder_packet *packet)
{
bfree(packet->data);
memset(packet, 0, sizeof(struct encoder_packet));
}