Minor improvements

basic_machines/pusher.lua

@@ -182,13 +182,19 @@ end
 
 local function config_item(pos, payload)
 	if type(payload) == "string" then
-		local name, count = unpack(payload:split(" "))
-		if name and (minetest.registered_nodes[name] or minetest.registered_items[name]
-				or minetest.registered_craftitems[name]) then
-			count = tonumber(count) or 1
+		if payload == "" then
 			local inv = M(pos):get_inventory()
-			inv:set_stack("main", 1, {name = name, count = 1})
-			return count
+			inv:set_stack("main", 1, nil)
+			return 0
+		else
+			local name, count = unpack(payload:split(" "))
+			if name and (minetest.registered_nodes[name] or minetest.registered_items[name]
+					or minetest.registered_craftitems[name]) then
+				count = tonumber(count) or 1
+				local inv = M(pos):get_inventory()
+				inv:set_stack("main", 1, {name = name, count = 1})
+				return count
+			end
 		end
 	end
 	return 0

doc/manual_DE.lua

@@ -1914,7 +1914,7 @@ techage.manual_DE.aText = {
   "\n"..
   "Der TA4 Schieber besitzt zwei zusätzliche Kommandos für den Lua Controller:\n"..
   "\n"..
-  "  - 'config' dient zur Konfiguration des Schiebers\\, analog zum manuellen Konfiguration über das Menü.\nBeispiel:  '$send_cmnd(1234\\, \"config\"\\, \"default:dirt\")'\n"..
+  "  - 'config' dient zur Konfiguration des Schiebers\\, analog zum manuellen Konfiguration über das Menü.\nBeispiel:  '$send_cmnd(1234\\, \"config\"\\, \"default:dirt\")'\nMit '$send_cmnd(1234\\, \"config\"\\, \"\")' wird die Konfiguration gelöscht\n"..
   "  - 'pull' dient zum Absetzen eines Auftrags an den Schieber:\nBeispiel: '$send_cmnd(1234\\, \"pull\"\\, \"default:dirt 8\")'\nAls Nummer sind Werte von 1 bis 12 zulässig. Danach geht der Schieber wieder in den 'stopped' Mode und sendet ein \"off\" Kommando zurück an den Sender des \"pull\" Kommandos.\n"..
   "\n"..
   "\n"..

doc/manual_EN.lua

@@ -1910,7 +1910,7 @@ techage.manual_EN.aText = {
   "\n"..
   "The TA4 pusher has two additional commands for the Lua controller:\n"..
   "\n"..
-  "  - 'config' is used to configure the pusher\\, analogous to manual configuration via the menu.\nExample: '$send_cmnd(1234\\, \"config\"\\, \"default: dirt\")'\n"..
+  "  - 'config' is used to configure the pusher\\, analogous to manual configuration via the menu.\nExample: '$send_cmnd(1234\\, \"config\"\\, \"default: dirt\")'\nWith '$send_cmnd(1234\\, \"config\"\\, \"\")' the configuration is deleted\n"..
   "  - 'pull' is used to send an order to the pusher:\nExample: '$send_cmnd(1234\\, \"pull\"\\, \"default: dirt 8\")'\nValues ​​from 1 to 12 are permitted as numbers. Then the pusher goes back to 'stopped' mode and sends an\" off \"command back to the transmitter of the\" pull \"command.\n"..
   "\n"..
   "\n"..

logic/detector.lua

@@ -83,12 +83,21 @@ local function formspec(meta)
 		"button_exit[2,2;3,1;exit;"..S("Save").."]"
 end
 
-local function after_place_node(pos, placer)
+local function after_place_node3(pos, placer)
 	local meta = M(pos)
 	local inv = meta:get_inventory()
 	inv:set_size('cfg', 4)
-	logic.after_place_node(pos, placer, "techage:ta3_detector_off", NDEF(pos).description)
-	logic.infotext(meta, NDEF(pos).description)
+	logic.after_place_node(pos, placer, "techage:ta3_detector_off", S("TA3 Detector"))
+	logic.infotext(meta, S("TA3 Detector"))
+	meta:set_string("formspec", formspec(meta))
+end
+
+local function after_place_node4(pos, placer)
+	local meta = M(pos)
+	local inv = meta:get_inventory()
+	inv:set_size('cfg', 4)
+	logic.after_place_node(pos, placer, "techage:ta4_detector_off", S("TA4 Detector"))
+	logic.infotext(meta, S("TA4 Detector"))
 	meta:set_string("formspec", formspec(meta))
 end
 
@@ -126,7 +135,7 @@ minetest.register_node("techage:ta3_detector_off", {
 		"techage_filling_ta3.png^techage_frame_ta3.png^techage_appl_detector.png",
 	},
 
-	after_place_node = after_place_node,
+	after_place_node = after_place_node3,
 	on_receive_fields = on_receive_fields,
 	techage_set_numbers = techage_set_numbers,
 	after_dig_node = after_dig_node,
@@ -179,7 +188,7 @@ minetest.register_node("techage:ta4_detector_off", {
 		"techage_filling_ta4.png^techage_frame_ta4.png^techage_appl_detector.png",
 	},
 
-	after_place_node = after_place_node,
+	after_place_node = after_place_node4,
 	on_receive_fields = on_receive_fields,
 	techage_set_numbers = techage_set_numbers,
 	after_dig_node = after_dig_node,

manuals/manual_ta4_DE.md

@@ -844,6 +844,7 @@ Der TA4 Schieber besitzt zwei zusätzliche Kommandos für den Lua Controller:
 
 - `config` dient zur Konfiguration des Schiebers, analog zum manuellen Konfiguration über das Menü.
   Beispiel:  `$send_cmnd(1234, "config", "default:dirt")`
+  Mit `$send_cmnd(1234, "config", "")` wird die Konfiguration gelöscht
 - `pull` dient zum Absetzen eines Auftrags an den Schieber:
   Beispiel: `$send_cmnd(1234, "pull", "default:dirt 8")`
   Als Nummer sind Werte von 1 bis 12 zulässig. Danach geht der Schieber wieder in den `stopped` Mode und sendet ein "off" Kommando zurück an den Sender des "pull" Kommandos.

manuals/manual_ta4_EN.md

@@ -836,6 +836,7 @@ The TA4 pusher has two additional commands for the Lua controller:
 
 - `config` is used to configure the pusher, analogous to manual configuration via the menu.
   Example: `$send_cmnd(1234, "config", "default: dirt")`
+  With `$send_cmnd(1234, "config", "")` the configuration is deleted
 - `pull` is used to send an order to the pusher:
   Example: `$send_cmnd(1234, "pull", "default: dirt 8")`
   Values ​​from 1 to 12 are permitted as numbers. Then the pusher goes back to `stopped` mode and sends an" off "command back to the transmitter of the" pull "command.

tools/repairkit.lua

@@ -76,6 +76,11 @@ local function read_state(itemstack, user, pointed_thing)
 					state = dump(state)
 					minetest.chat_send_player(user:get_player_name(), ndef.description.." "..number..": state = "..state.."    ")
 				end
+				local state = techage.send_single("0", number, "count", nil)
+				if state and state ~= "" and state ~= "unsupported" then
+					state = dump(state)
+					minetest.chat_send_player(user:get_player_name(), ndef.description.." "..number..": count = "..state.."    ")
+				end
 				local fuel = techage.send_single("0", number, "fuel", nil)
 				if fuel and fuel ~= "" and fuel ~= "unsupported" then
 					fuel = dump(fuel)