does no longer allocate temporary buffers
when there is enough room in dstBuffer to decompress directly there.
(previous method would skip that for 1st chunk only).
Also : fix ZSTD_compressBound() for small srcSize
required so that if Total = A+B
compressBound(Total) <= compressBound(A) + compressBound(B)
under condition of a minimum size for A and B
Will help for ZSTDMT_compress() memory allocation
forgot to add the dictionary content
(tests were not failing, just compressing less).
Also : added size protections when adding dict content
since hc/bt table filling would fail if size < 8
The compressor always reuses the existing Huffman table if the literals
size is at most 1 KiB. If the compression strategy is `ZSTD_lazy` or
stronger always check to see if reusing the previous table or creating
a new table is better.
This doesn't yet weigh in decompression speed. I don't want to add any
heuristics there until I have real data to work with to ensure that the
heuristic works for at least one use case, preferably more.
* Compressor saves most recently used Huffman table and reuses it
if it produces better results.
* I attempted to preserve CPU usage profile.
I intentionally left all of the existing heuristics in place.
There is only a speed difference on the second block and later.
When compressing large enough blocks (say >= 4 KiB) there is
no significant difference in compression speed.
Dictionary compression of one block is the same speed for blocks
with literals <= 1 KiB, and after that the difference is not
very significant.
* In the synthetic data, with blocks 10 KB or smaller, most blocks
can't use repeated tables because the previous block did not
contain a symbol that the current block contains.
Once blocks are about 12 KB or more, most previous blocks have
valid Huffman tables for the current block, and the compression
ratio and decompression speed jumped.
* In silesia blocks as small as 4KB can frequently reuse the
previous Huffman table (85%), but it isn't as profitable, and
the previous Huffman table only gets used about 3% of the time.
* Microbenchmarks show that `HUF_validateCTable()` takes ~55 ns
and `HUF_estimateCompressedSize()` takes ~35 ns.
They are decently well optimized, the first versions took 90 ns
and 120 ns respectively. `HUF_validateCTable()` could be twice as
fast, if we cast the `HUF_CElt*` to a `U32*` and compare to 0.
However, `U32` has an alignment of 4 instead of 2, so I think that
might be undefined behavior.
* I've ran `zstreamtest` compiled normally, with UASAN and with MSAN
for 4 hours each.
The worst case for the speed difference is a bunch of small blocks
in the same frame. I modified `bench.c` to compress the input in a
single frame but with blocks of the given block size, set by `-B`.
Benchmarks on level 1:
| Program | Block size | Corpus | Ratio | Compression MB/s | Decompression MB/s |
|-----------|------------|-----------|-------|------------------|--------------------|
| zstd.base | 256 | synthetic | 2.364 | 110.0 | 297.0 |
| zstd | 256 | synthetic | 2.367 | 108.9 | 297.0 |
| zstd.base | 256 | silesia | 2.204 | 93.8 | 415.7 |
| zstd | 256 | silesia | 2.204 | 93.4 | 415.7 |
| zstd.base | 512 | synthetic | 2.594 | 144.2 | 420.0 |
| zstd | 512 | synthetic | 2.599 | 141.5 | 425.7 |
| zstd.base | 512 | silesia | 2.358 | 118.4 | 432.6 |
| zstd | 512 | silesia | 2.358 | 119.8 | 432.6 |
| zstd.base | 1024 | synthetic | 2.790 | 192.3 | 594.1 |
| zstd | 1024 | synthetic | 2.794 | 192.3 | 600.0 |
| zstd.base | 1024 | silesia | 2.524 | 148.2 | 464.2 |
| zstd | 1024 | silesia | 2.525 | 148.2 | 467.6 |
| zstd.base | 4096 | synthetic | 3.023 | 300.0 | 1000.0 |
| zstd | 4096 | synthetic | 3.024 | 300.0 | 1010.1 |
| zstd.base | 4096 | silesia | 2.779 | 223.1 | 623.5 |
| zstd | 4096 | silesia | 2.779 | 223.1 | 636.0 |
| zstd.base | 16384 | synthetic | 3.131 | 350.0 | 1150.1 |
| zstd | 16384 | synthetic | 3.152 | 350.0 | 1630.3 |
| zstd.base | 16384 | silesia | 2.871 | 296.5 | 883.3 |
| zstd | 16384 | silesia | 2.872 | 294.4 | 898.3 |
XXH_STATIC_LINKING_ONLY protection macro is intended to be triggered just before the include.
The main idea is to keep this setting local :
user module shall explicitly understand and accept the static linking restriction
which becomes transparent when triggering the macro at project level.
Global definition also triggers redefinition warnings for user modules which do locally define the macro.
This new version compiles lib and cli without warning when the macro is set globally.
That's not a scenario to be recommended, since it trades a local effect for a global one,
but it was easy enough to provide from zstd side.
There used to be a (very small) chance that
loading prefix from previous segment
would be confused with a real zstd dictionary.
For that to happen, the prefix needs to start
with the same value as dictionary magic.
That's 1 chance in 4 billions if all values have equal probability.
But in fact, since some values are more common (0x00000000 for example)
others are less common, and dictionary magic was selected to be one of them,
so probabilities are likely even lower.
Anyway, this risk is no down to zero
by adding a new CCtx parameter : ZSTD_p_forceRawDict
Current parameter policy : the parameter "stick" to its CCtx,
so any dictionary loading after ZSTD_p_forceRawDict is set
will be loaded in "raw" ("content only") mode,
even if CCtx is re-used multiple times with multiple different dictionary.
It's up to the user to reset this value differently if it needs so.
Reproduction steps:
```
make zstreamtest CC=clang CFLAGS="-O3 -g -fsanitize=memory -fsanitize-memory-track-origins"
./zstreamtest -vv -t4178 -i4178 -s4531
```
How to get to the error in gdb (may be a more efficient way):
* 2 breaks at zstd_compress.c:2418 -- in ZSTD_compressContinue_internal()
* 2 breaks at zstd_compress.c:2276 -- in ZSTD_compressBlock_internal()
* 1 break at zstd_compress.c:1547
Why the error occurred:
When `zc->forceWindow == 1`, after calling `ZSTD_loadDictionaryContent()` we
have `zc->loadedDictEnd == zc->nextToUpdate == 0`. But, we've really loaded up
to `iend` into the dictionary. Then in `ZSTD_compressBlock_internal()` we see
that `current > zc->nextToUpdate + 384`, so we load the last 192 bytes a second
time. In this case the bytes we are loading are a block of all 0s, starting in
the previous block. So when we are loading the last 192 bytes, we find a `match`
in the future, 183 bytes beyond `ip`. Since the block is all 0s, the match
extends to the end of the block. But in `ZSTD_count()` we only check that
`pIn < pInLoopLimit`, but since `pMatch > pIn`, `pMatch` eventually points past
the end of the buffer, causing the MSAN failure.
The fix:
The line changed sets sets `zc->nextToUpdate` to the end of the dictionary.
This is the behavior that existed before `ZSTD_p_forceWindow` was introduced.
This fixes the exposing test case. Since the code doesn't fail without
`zc->forceWindow`, it makes sense that this works. I've run the command
`./zstreamtest -T2mn` 64 times without failures. CI should also verify nothing
obvious broke.
Like ZSTD_initCStream_usingDict(),
ZSTDMT_initCStream_usingDict() now keep a copy of dict internally.
This way, dict can be released :
it does not longer have to outlive all future compression sessions.
MT compression generates a single frame.
Multi-threading operates by breaking the frames into independent sections.
But from a decoder perspective, there is no difference :
it's just a suite of blocks.
Problem is, decoder preserves repCodes from previous block to start decoding next block.
This is also valid between sections, since they are no different than changing block.
Previous version would incorrectly initialize repcodes to their default value at the beginning of each section.
When using them, there was a mismatch between encoder (default values) and decoder (values from previous block).
This change ensures that repcodes won't be used at the beginning of a new section.
It works by setting them to 0.
This only works with regular (single segment) variants : extDict variants will fail !
Fortunately, sections beyond the 1st one belong to this category.
To be checked : btopt strategy.
This change was only validated from fast to btlazy2 strategies.
When porting python-zstandard to use ZSTD_initCStream_usingCDict()
so compression dictionaries could be reused, an automated test
failed due to compressed content changing.
I tracked this down to ZSTD_initCStream_usingCDict() not
setting the dictID field of the ZSTD_CCtx attached to the
ZSTD_CStream instance.
I'm not 100% convinced this is the correct or full solution,
as I'm still seeing one automated test failing with this change.
Result from getBuffer and getCCtx could be NULL when allocation fails.
Now correctly checks : job creation stop and last job reports an allocation error.
releaseBuffer and releaseCCtx are now also compatible with NULL input.
Identified a new potential issue :
when early job fails, later jobs are not collected for resource retrieval.
The new strategy involves cutting frame at block level.
The result is a single frame, preserving ZSTD_getDecompressedSize()
As a consequence, bench can now make a full round-trip,
since the result is compatible with ZSTD_decompress().
This strategy will not make it possible to decode the frame with multiple threads
since the exact cut between independent blocks is not known.
MT decoding needs further discussions.
