Yann Collet
d636cd1444
Merge pull request #1692 from felixhandte/v1.4.1-changelog
...
Update CHANGELOG with v1.4.1 Changes
2019-07-19 09:10:39 -07:00
W. Felix Handte
62a0dc57b1
Update CHANGELOG with v1.4.1 Changes
2019-07-19 11:18:10 -04:00
Qin Li
04a9d6b828
fix compiling errors with clang-8
...
Compiling with clang-8 fails with the following errors:
largeNbDicts.c:562:37: error: implicit conversion turns floating-point
number into integer: 'const double' to 'U64' (aka 'unsigned long')
[-Werror,-Wfloat-conversion]
U64 const dTime_ns = result.nanoSecPerRun;
~~~~~~~~ ~~~~~~~^~~~~~~~~~~~~
zstdcli.c:300:5: error: '@return' command used in a comment that is
not attached to a function or method declaration
[-Werror,-Wdocumentation]
* @return 1 means that cover parameters were correct
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
zstdcli.c:301:5: error: '@return' command used in a comment that is
not attached to a function or method declaration
[-Werror,-Wdocumentation]
* @return 0 in case of malformed parameters
~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-07-18 19:41:00 -07:00
Vivek Miglani
a3ce0c9d04
Fixing decodecorpus test issue
2019-07-18 14:32:09 -07:00
W. Felix Handte
a2861d75eb
[doc] Bump Format Spec Version
2019-07-17 18:55:45 -04:00
W. Felix Handte
c05b270edc
[doc] Remove Limitation that Compressed Block is Smaller than Uncompressed Content
...
This changes the size limit on compressed blocks to match those of the other
block types: they may not be larger than the `Block_Maximum_Decompressed_Size`,
which is the smaller of the `Window_Size` and 128 KB, removing the additional
restriction that had been placed on `Compressed_Block`s, that they be smaller
than the decompressed content they represent.
Several things motivate removing this restriction. On the one hand, this
restriction is not useful for decoders: the decoder must nonetheless be
prepared to accept compressed blocks that are the full
`Block_Maximum_Decompressed_Size`. And on the other, this bound is actually
artificially limiting. If block representations were entirely independent,
a compressed representation of a block that is larger than the contents of the
block would be ipso facto useless, and it would be strictly better to send it
as an `Raw_Block`. However, blocks are not entirely independent, and it can
make sense to pay the cost of encoding custom entropy tables in a block, even
if that pushes that block size over the size of the data it represents,
because those tables can be re-used by subsequent blocks.
Finally, as far as I can tell, this restriction in the spec is not currently
enforced in any Zstandard implementation, nor has it ever been. This change
should therefore be safe to make.
2019-07-17 18:55:45 -04:00
Vivek Miglani
c7be7d2efb
Fixing compressed block size checks
2019-07-17 12:53:15 -07:00
Ephraim Park
1dc98de279
Restructure the source files
2019-07-15 17:39:18 -07:00
Nick Terrell
f7d56943fd
Merge pull request #1684 from terrelln/regression
...
[regression] Update results for ZSTD_double_fast update
2019-07-15 15:39:52 -04:00
Vivek Miglani
3f108f82fb
Return error if block size exceeds maximum
2019-07-15 12:10:21 -07:00
Nick Terrell
4c2943df23
[regression] Update results for ZSTD_double_fast update
2019-07-15 11:25:22 -07:00
Vivek Miglani
de61b36f9e
Merge branch 'master' of https://github.com/vivekmig/zstd into dev
2019-07-15 10:47:09 -07:00
Yann Collet
8fb08b68cc
Merge pull request #1681 from facebook/level3
...
updated double_fast complementary insertion
2019-07-12 16:16:06 -07:00
Nick Terrell
75cfe1dc69
[ldm] Fix bug in overflow correction with large job size ( #1678 )
...
* [ldm] Fix bug in overflow correction with large job size
* [zstdmt] Respect ZSTDMT_JOBSIZE_MAX (1G in 64-bit mode)
* [test] Add test that exposes the bug
Sadly the test fails on our CI because it uses too much memory, so
I had to comment it out.
2019-07-12 18:45:18 -04:00
Yann Collet
eaeb7f00b5
updated the _extDict variant of double fast
2019-07-12 14:17:17 -07:00
Yann Collet
e8a7f5d3ce
double-fast: changed the trade-off for a smaller positive change
...
same number of complementary insertions, just organized differently
(long at `ip-2`, short at `ip-1`).
2019-07-12 11:34:53 -07:00
mgrice
812e8f2a16
perf improvements for zstd decode ( #1668 )
...
* perf improvements for zstd decode
tldr: 7.5% average decode speedup on silesia corpus at compression levels 1-3 (sandy bridge)
Background: while investigating zstd perf differences between clang and gcc I noticed that even though gcc is vectorizing the loop in in wildcopy, it was not being done as well as could be done by hand. The sites where wildcopy is invoked have an interesting distribution of lengths to be copied. The loop trip count is rarely above 1, yet long copies are common enough to make their performance important.The code in zstd_decompress.c to invoke wildcopy handles the latter well but the gcc autovectorizer introduces a needlessly expensive startup check for vectorization.
See how GCC autovectorizes the loop here:
https://godbolt.org/z/apr0x0
Here is the code after this diff has been applied: (left hand side is the good one, right is with vectorizer on)
After: https://godbolt.org/z/OwO4F8
Note that autovectorization still does not do a good job on the optimized version, so it's turned off\
via attribute and flag. I found that neither attribute nor command-line flag were entirely successful in turning off vectorization, which is why there were both.
silesia benchmark data - second triad of each file is with the original code:
file orig compressedratio encode decode change
1#dickens 10192446-> 4268865(2.388), 198.9MB/s 709.6MB/s
2#dickens 10192446-> 3876126(2.630), 128.7MB/s 552.5MB/s
3#dickens 10192446-> 3682956(2.767), 104.6MB/s 537MB/s
1#dickens 10192446-> 4268865(2.388), 195.4MB/s 659.5MB/s 7.60%
2#dickens 10192446-> 3876126(2.630), 127MB/s 516.3MB/s 7.01%
3#dickens 10192446-> 3682956(2.767), 105MB/s 479.5MB/s 11.99%
1#mozilla 51220480-> 20117517(2.546), 285.4MB/s 734.9MB/s
2#mozilla 51220480-> 19067018(2.686), 220.8MB/s 686.3MB/s
3#mozilla 51220480-> 18508283(2.767), 152.2MB/s 669.4MB/s
1#mozilla 51220480-> 20117517(2.546), 283.4MB/s 697.9MB/s 5.30%
2#mozilla 51220480-> 19067018(2.686), 225.9MB/s 665MB/s 3.20%
3#mozilla 51220480-> 18508283(2.767), 154.5MB/s 640.6MB/s 4.50%
1#mr 9970564-> 3840242(2.596), 262.4MB/s 899.8MB/s
2#mr 9970564-> 3600976(2.769), 181.2MB/s 717.9MB/s
3#mr 9970564-> 3563987(2.798), 116.3MB/s 620MB/s
1#mr 9970564-> 3840242(2.596), 253.2MB/s 827.3MB/s 8.76%
2#mr 9970564-> 3600976(2.769), 177.4MB/s 655.4MB/s 9.54%
3#mr 9970564-> 3563987(2.798), 111.2MB/s 564.2MB/s 9.89%
1#nci 33553445-> 2849306(11.78), 575.2MB/s , 1335.8MB/s
2#nci 33553445-> 2890166(11.61), 509.3MB/s , 1238.1MB/s
3#nci 33553445-> 2857408(11.74), 431MB/s , 1210.7MB/s
1#nci 33553445-> 2849306(11.78), 565.4MB/s , 1220.2MB/s 9.47%
2#nci 33553445-> 2890166(11.61), 508.2MB/s , 1128.4MB/s 9.72%
3#nci 33553445-> 2857408(11.74), 429.1MB/s , 1097.7MB/s 10.29%
1#ooffice 6152192-> 3590954(1.713), 231.4MB/s , 662.6MB/s
2#ooffice 6152192-> 3323931(1.851), 162.8MB/s , 592.6MB/s
3#ooffice 6152192-> 3145625(1.956), 99.9MB/s , 549.6MB/s
1#ooffice 6152192-> 3590954(1.713), 224.7MB/s , 624.2MB/s 6.15%
2#ooffice 6152192-> 3323931 (1.851), 155MB/s , 564.5MB/s 4.98%
3#ooffice 6152192-> 3145625(1.956), 101.1MB/s , 521.2MB/s 5.45%
1#osdb 10085684-> 3739042(2.697), 271.9MB/s 876.4MB/s
2#osdb 10085684-> 3493875(2.887), 208.2MB/s 857MB/s
3#osdb 10085684-> 3515831(2.869), 135.3MB/s 805.4MB/s
1#osdb 10085684-> 3739042(2.697), 257.4MB/s 793.8MB/s 10.41%
2#osdb 10085684-> 3493875(2.887), 209.7MB/s 776.1MB/s 10.42%
3#osdb 10085684-> 3515831(2.869), 130.6MB/s 727.7MB/s 10.68%
1#reymont 6627202-> 2152771(3.078), 198.9MB/s 696.2MB/s
2#reymont 6627202-> 2071140(3.200), 170MB/s 595.2MB/s
3#reymont 6627202-> 1953597(3.392), 128.5MB/s 609.7MB/s
1#reymont 6627202-> 2152771(3.078), 199.6MB/s 655.2MB/s 6.26%
2#reymont 6627202-> 2071140(3.200), 168.2MB/s 554.4MB/s 7.36%
3#reymont 6627202-> 1953597(3.392), 128.7MB/s 557.4MB/s 9.38%
1#samba 21606400-> 5510994(3.921), 338.1MB/s 1066MB/s
2#samba 21606400-> 5240208(4.123), 258.7MB/s 992.3MB/s
3#samba 21606400-> 5003358(4.318), 200.2MB/s 991.1MB/s
1#samba 21606400-> 5510994(3.921), 330.8MB/s 974MB/s 9.45%
2#samba 21606400-> 5240208(4.123), 257.9MB/s 919.4MB/s 7.93%
3#samba 21606400-> 5003358(4.318), 198.5MB/s 908.9MB/s 9.04%
1#sao 7251944-> 6256401(1.159), 194.6MB/s 602.2MB/s
2#sao 7251944-> 5808761(1.248), 128.2MB/s 532.1MB/s
3#sao 7251944-> 5556318(1.305), 73MB/s 509.4MB/s
1#sao 7251944-> 6256401(1.159), 198.7MB/s 580.7MB/s 3.70%
2#sao 7251944-> 5808761(1.248), 129.1MB/s 502.7MB/s 5.85%
3#sao 7251944-> 5556318(1.305), 74.6MB/s 493.1MB/s 3.31%
1#webster 41458703-> 13692222(3.028), 222.3MB/s 752MB/s
2#webster 41458703-> 12842646(3.228), 157.6MB/s 532.2MB/s
3#webster 41458703-> 12191964(3.400), 124MB/s 468.5MB/s
1#webster 41458703-> 13692222(3.028), 219.7MB/s 697MB/s 7.89%
2#webster 41458703-> 12842646(3.228), 153.9MB/s 495.4MB/s 7.43%
3#webster 41458703-> 12191964(3.400), 124.8MB/s 444.8MB/s 5.33%
1#xml 5345280-> 696652(7.673), 485MB/s , 1333.9MB/s
2#xml 5345280-> 681492(7.843), 405.2MB/s , 1237.5MB/s
3#xml 5345280-> 639057(8.364), 328.5MB/s , 1281.3MB/s
1#xml 5345280-> 696652(7.673), 473.1MB/s , 1232.4MB/s 8.24%
2#xml 5345280-> 681492(7.843), 398.6MB/s , 1145.9MB/s 7.99%
3#xml 5345280-> 639057(8.364), 327.1MB/s , 1175MB/s 9.05%
1#x-ray 8474240-> 6772557(1.251), 521.3MB/s 762.6MB/s
2#x-ray 8474240-> 6684531(1.268), 230.5MB/s 688.5MB/s
3#x-ray 8474240-> 6166679(1.374), 68.7MB/s 478.8MB/s
1#x-ray 8474240-> 6772557(1.251), 502.8MB/s 736.7MB/s 3.52%
2#x-ray 8474240-> 6684531(1.268), 224.4MB/s 662MB/s 4.00%
3#x-ray 8474240-> 6166679(1.374), 67.3MB/s 437.8MB/s 9.37%
7.51%
* makefile changed to only pass -fno-tree-vectorize to gcc
* <Replace this line with a title. Use 1 line only, 67 chars or less>
Don't add "no-tree-vectorize" attribute on clang (which defines __GNUC__)
* fix for warning/error with subtraction of void* pointers
* fix c90 conformance issue - ISO C90 forbids mixed declarations and code
* Fix assert for negative diff, only when there is no overlap
* fix overflow revealed in fuzzing tests
* tweak for small speed increase
2019-07-11 18:31:07 -04:00
Yann Collet
d1327738c2
updated double_fast complementary insertion
...
in a way which is more favorable to compression ratio,
though very slightly slower (~-1%).
More details in the PR.
2019-07-11 15:25:22 -07:00
Yann Collet
b01c1c679f
Merge pull request #1675 from ephiepark/dev
...
Factor out the logic to build sequences
2019-07-10 13:32:31 -07:00
Yann Collet
2387d574cb
updated .gitignore
2019-07-09 14:54:48 -07:00
Yann Collet
34a1a37246
updated .gitignore rule
2019-07-09 14:44:22 -07:00
Yann Collet
8eda16c9f6
Merge pull request #1677 from LeeYoung624/gitignore_fix
...
fix gitignore errors
2019-07-09 14:36:38 -07:00
Yann Collet
b8ec4b0fd6
updated version number (to v1.4.1)
...
also : added doc on context re-use, as suggested by @scherepanov at #1676
2019-07-09 11:43:59 -07:00
LeeYoung624
654cb9d439
fix gitignore errors
2019-07-09 21:08:13 +08:00
Yann Collet
096714d1b8
Merge pull request #1671 from ephiepark/dev
...
Adding targetCBlockSize param
2019-07-03 17:47:44 -07:00
Ephraim Park
f57ac7b09e
Factor out the logic to build sequences
2019-07-03 15:42:38 -07:00
Ephraim Park
9007701670
Adding targetCBlockSize param
2019-07-03 15:41:52 -07:00
Nick Terrell
e962f07d19
[fuzz] Add a compression fuzzer with randomly sized output buffer ( #1670 )
2019-07-02 22:05:07 -07:00
Nick Terrell
6c92ba774e
ZSTD_compressSequences_internal assert op <= oend ( #1667 )
...
When we wrote one byte beyond the end of the buffer for RLE
blocks back in 1.3.7, we would then have `op > oend`. That is
a problem when we use `oend - op` for the size of the destination
buffer, and allows further writes beyond the end of the buffer for
the rest of the function. Lets assert that it doesn't happen.
2019-07-02 15:45:47 -07:00
Yann Collet
857e608b51
Merge pull request #1658 from facebook/memset
...
memset() rather than reduceIndex()
2019-07-01 15:01:43 -07:00
Yann Collet
4d611ca405
Merge pull request #1664 from ephiepark/dev
...
decodecorpus
2019-07-01 14:13:49 -07:00
Ephraim Park
01f5b5d918
Merge pull request #7 from ephiepark/decodecorpus
...
reflect code review comments
2019-07-01 10:18:59 -07:00
Ephraim Park
28309520c0
reflect code review comments
2019-07-01 10:17:30 -07:00
Yann Collet
068cc18927
Merge pull request #1665 from lzutao/meson-deprecated-warnings
...
meson: Fix deprecated build warnings on build options
2019-06-30 11:36:35 -07:00
Lzu Tao
132a1ad291
meson: Always build gen_html on build machine
...
Because we use gen_html as a generator instead of a binary to
run on host machine.
2019-06-29 02:22:39 +07:00
Lzu Tao
8e590a1af3
meson: Fix deprecated build warnings on build options
...
Meson now reserves the `build_` prefix for options
2019-06-29 02:22:39 +07:00
Lzu Tao
4d156854fe
meson: Beautify travis config
2019-06-29 01:42:17 +07:00
Ephraim Park
9f4d71f48d
Merge pull request #6 from ephiepark/decodecorpus
...
Add test case for short bistream
2019-06-27 17:38:50 -07:00
Ephraim Park
01e8384000
Add test case for short bistream
2019-06-27 17:37:39 -07:00
Tyler-Tran
c55d2e7ba3
Adding shrinking flag for cover and fastcover ( #1656 )
...
* Changed ERROR(GENERIC) excluding inits
* editing git ignore
* Edited init functions to size_t returns
* moved declarations earlier
* resolved issues with changes to init functions
* fixed style and an error check
* attempting to add tests that might trigger changes
* added && die to cases expecting to fail
* resolved no die on expected failed command
* fixed accel to be incorrect value
* Adding an automated shrinking option
* Fixing build
* finalizing fixes
* fix?
* Removing added comment in cover.h
* Styling fixes
* Merging with fb dev
* removing megic number for default regression
* Requested revisions
* fixing support for fast cover
* fixing casting errors
* parenthesis fix
* fixing some build nits
* resolving travis ci syntax
* might resolve all compilation issues
* removed unused variable
* remodeling the selectDict function
* fixing bad memory access
* fixing error checks
* fixed erroring check in selectDict
* fixing mixed declarations
* modify mixed declaration
* fixing nits and adding test cases
* Adding requested changes + fixed bug for error checking
* switched double comparison from != to <
* fixed declaration typing
* refactoring COVER_best_finish() and changing shrinkDict
* removing the const's
* modifying ZDICT_optimizeTrainFromBuffer_cover functions
* fixing potential bad memcpy
* fixing the error function for dict size
2019-06-27 16:26:57 -07:00
Ephraim Park
36d0bc2617
Merge pull request #5 from ephiepark/decodecorpus
...
Decodecorpus
2019-06-27 15:02:48 -07:00
Ephraim Park
c7c1ba3a19
Fix a constraint stricter than the spec
2019-06-26 16:43:37 -07:00
Ephraim Park
734eff70b8
enable repeat mode on rle
2019-06-26 16:39:00 -07:00
Yann Collet
621adde3b2
changed naming to ZSTD_indexTooCloseToMax()
...
Also : minor speed optimization :
shortcut to ZSTD_reset_matchState() rather than the full reset process.
It still needs to be completed with ZSTD_continueCCtx() for proper initialization.
Also : changed position of LDM hash tables in the context,
so that the "regular" hash tables can be at a predictable position,
hence allowing the shortcut to ZSTD_reset_matchState() without complex conditions.
2019-06-24 14:39:29 -07:00
Nick Terrell
9038579ab2
Merge pull request #1659 from terrelln/big-dict
...
Fix data corruption in niche use case
2019-06-24 12:40:58 -07:00
Nick Terrell
8e16b872e5
[tests] Add tests for big dictionaries
2019-06-21 17:58:24 -07:00
Yann Collet
45c9fbd6d9
prefer memset() rather than reduceIndex() when close to index range limit
...
by disabling continue mode when index is close to limit.
2019-06-21 16:19:21 -07:00
Yann Collet
944e2e9e12
benchfn : added macro macro CONTROL()
...
like assert() but cannot be disabled.
proper separation of user contract errors (CONTROL())
and invariant verification (assert()).
2019-06-21 15:58:55 -07:00
Nick Terrell
674534a700
[zstd] Fix data corruption in niche use case
...
* Extract the overflow correction into a helper function.
* Load the dictionary `ZSTD_CHUNKSIZE_MAX = 512 MB` bytes at a time
and overflow correct between each chunk.
Data corruption could happen when all these conditions are true:
* You are using multithreading mode
* Your overlap size is >= 512 MB (implies window size >= 512 MB)
* You are using a strategy >= ZSTD_btlazy
* You are compressing more than 4 GB
The problem is that when loading a large dictionary we don't do
overflow correction. We can only load 512 MB at a time, and may
need to do overflow correction before each chunk.
2019-06-21 15:47:31 -07:00
Nick Terrell
4156060ca4
[zstdmt] Update assert to use ZSTD_WINDOWLOG_MAX
2019-06-21 15:39:33 -07:00