Escaping in add_custom_target() seems to depend on the shell used in the cmake
generator and using Ninja on Windows, which uses cmd.exe, results in stray backslashes
in the .pc file.
Instead of going through escaping hell just use configure_file() with the existing
libzstd.pc.in file already used by the simple Makefile based build system.
This fixes the .pc file syntax when building zstd with CMake+Ninja+gcc on Windows.
The pkgconfig file generation didn't correctly escape the paths. It both
quoted and escaped spaces with `\`, which doesn't work. The fix is to
remove the quoting.
this API is deprecated, for a loong time now,
all related symbols will be removed in a future version (likely v1.5.0)
and the header file `zbuff.h` doesn't compile from `include/` anyway,
because it needs to be positioned one directory below `zstd.h`.
Also removed `cover.h` from `cmake` installer,
as it should have never been part of this list to begin with.
Resubmission of #2001. This switches the `sed` invocations to use `-E`,
extended regex syntax, which is better standardized across platforms.
I guess.
Same test plan:
```
make -C lib clean libzstd.pc
cat lib/libzstd.pc
echo # should fail
make -C lib clean libzstd.pc LIBDIR=/foo
make -C lib clean libzstd.pc INCLUDEDIR=/foo
make -C lib clean libzstd.pc LIBDIR=/usr/localfoo
make -C lib clean libzstd.pc INCLUDEDIR=/usr/localfoo
make -C lib clean libzstd.pc LIBDIR=/usr/local/lib prefix=/foo
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local/include prefix=/foo
echo # should succeed
make -C lib clean libzstd.pc LIBDIR=/usr/local/foo
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local/foo
make -C lib clean libzstd.pc LIBDIR=/usr/local/
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local/
make -C lib clean libzstd.pc LIBDIR=/usr/local
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local
make -C lib clean libzstd.pc LIBDIR=/tmp/foo prefix=/tmp
make -C lib clean libzstd.pc INCLUDEDIR=/tmp/foo prefix=/tmp
make -C lib clean libzstd.pc LIBDIR=/tmp/foo prefix=/tmp/foo
make -C lib clean libzstd.pc INCLUDEDIR=/tmp/foo prefix=/tmp/foo
echo # should also succeed
make -C lib clean libzstd.pc prefix=/foo LIBDIR=/foo/bar INCLUDEDIR=/foo/
cat lib/libzstd.pc
mkdir out
cd out
cmake ../build/cmake
make
cat lib/libzstd.pc
```
Revises #1851. Fixes#1900. Replaces #1930.
Thanks to @orbea, @neheb, @Polynomial-C, and particularly @eli-schwartz for
pointing out the problem and suggesting solutions.
Tested with
```
make -C lib clean libzstd.pc
cat lib/libzstd.pc
# should fail
make -C lib clean libzstd.pc LIBDIR=/foo
make -C lib clean libzstd.pc INCLUDEDIR=/foo
make -C lib clean libzstd.pc LIBDIR=/usr/localfoo
make -C lib clean libzstd.pc INCLUDEDIR=/usr/localfoo
make -C lib clean libzstd.pc LIBDIR=/usr/local/lib prefix=/foo
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local/include prefix=/foo
# should succeed
make -C lib clean libzstd.pc LIBDIR=/usr/local/foo
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local/foo
make -C lib clean libzstd.pc LIBDIR=/usr/local/
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local/
make -C lib clean libzstd.pc LIBDIR=/usr/local
make -C lib clean libzstd.pc INCLUDEDIR=/usr/local
make -C lib clean libzstd.pc LIBDIR=/tmp/foo prefix=/tmp
make -C lib clean libzstd.pc INCLUDEDIR=/tmp/foo prefix=/tmp
make -C lib clean libzstd.pc LIBDIR=/tmp/foo prefix=/tmp/foo
make -C lib clean libzstd.pc INCLUDEDIR=/tmp/foo prefix=/tmp/foo
# should also succeed
make -C lib clean libzstd.pc prefix=/foo LIBDIR=/foo/bar INCLUDEDIR=/foo/
cat lib/libzstd.pc
mkdir out
cd out
cmake ../build/cmake
make
cat lib/libzstd.pc
```
2020-02-18 12:23:50 -05:00
Niall Douglas (s [underscore] sourceforge {at} nedprod [dot] com)
Addresses #1794. Instead of deriving the lib dir and include dir at
build-time, let's do it like everyone else does at pkg-config run-time.
This has the disadvantage that we can no longer override LIBDIR and
INCLUDEDIR in the Makefile and have that reflected in the .pc file.
Automatically extract version information
from the zstd.h file. Use naming of variables
consisent with modern cmake and https://semver.org/
(Semantic Versioning 2.0.0, MAJOR, MINOR, PATCH)
Modern versions of cmake provide consistent
paradigms for configuring project external
interface values.
This set of changes provide a back port of
some of cmake 3+ paradigms back to cmake 2.8.9.
Set and allow use of the current cmake policies
for newer versions of cmake when available to
allow for modern compiler features to be
utilized when available.
NOTE: The intent is that future modifications to
cmake will enable (conditional on cmake version support)
the ability to support modern linkage, and target
export mechanisms. Those future changes will
make incorporating zstd into other packages
much easier.
This patch also allows the more rigourous error
checking of commmon cmake errors to be preformed
by cmake (i.e. more stringent syntax checking and
create errors for common hard to find misuses of
cmake variables).
This patch also provides support for modern
compiler support options by cmake (like
enabling interprocedural optimization
if link time optimizations are known to be supported
by the compiler envirionment. IPO can be supported
by setting the CMAKE_INTERPROCEDURAL_OPTIMIZATION variable
for newer versions of cmake.
Ancient versions of CMake required else(), endif(), and similar block
termination commands to have arguments matching the command starting the block.
This is no longer the preferred style.
isolate all logic associated with block decompression
into its own module.
zstd_decompress is still in charge
of context creation/destruction,
frames, headers, streaming, special blocks, etc.
Compressed blocks themselves are now handled within zstd_decompress_block .
* Minor fix
* Run non-optimize FASTCOVER 5 times in benchmark
* Merge fastCover into dictBuilder
* Fix mixed declaration issue
* Add fastcover to symbol.c
* Add fastCover.c and cover.h to build
* Change fastCover.c to fastcover.c
* Update benchmark to run FASTCOVER in dictBuilder
* Undo spliting fastcover_param into cover_param and f
* Remove convert param functions
* Assign f to parameter
* Add zdict.h to Makefile in lib
* Add cover.h to BUCK
* Cast 1 to U64 before shifting
* Remove trimming of zero freq head and tail in selectSegment and rebenchmark
* Remove f as a separate parameter of tryParam
* Read 8 bytes when d is 6
* Add trimming off zero frequency head and tail
* Use best functions from COVER and remove trimming part(which leads to worse compression ratio after previous bugs were fixed)
* Add finalize= argument to FASTCOVER to specify percentage of training samples passed to ZDICT_finalizeDictionary
* Change nbDmer to always read 8 bytes even when d=6
* Add skip=# argument to allow skipping dmers in computeFrequency in FASTCOVER
* Update comments and benchmarking result
* Change default method of ZDICT_trainFromBuffer to ZDICT_optimizeTrainFromBuffer_fastCover
* Add dictType enum and fix bug about passing zParam when converting to coverParam
* Combine finalize and skip into a single parameter
* Update acceleration parameters and benchmark on 3 sample sets
* Change default splitPoint of FASTCOVER to 0.75 and benchmark first 3 sample sets
* Initialize variables outside of for loop in benchmark.c
* Update benchmark result for hg-manifest
* Remove cover.h from install-includes
* Add explanation of f
* Set default compression level for trainFromBuffer to 3
* Add assertion of fastCoverParams in DiB_trainFromFiles
* Add checkTotalCompressedSize function + some minor fixes
* Add test for multithreading fastCovr
* Initialize segmentFreqs in every FASTCOVER_selectSegment and move mutex_unnlock to end of COVER_best_finish
* Free segmentFreqs
* Initialize segmentFreqs before calling FASTCOVER_buildDictionary instead of in FASTCOVER_selectSegment
* Add FASTCOVER_MEMMULT
* Minor fix
* Update benchmarking result
The original conditions only worked, when both, static and shared variants where built, resulting in an inconsistency between programs and library. The program was built with MT support enabled, the library not. That lead to error 11 'unsupported parameter' when compressing anything with the command line tool.
When changing the AND condition to `ZSTD_MULTITHREAD_SUPPORT AND (ZSTD_BUILD_SHARED OR ZSTD_BUILD_SHARED)`, cmake stopps complaining one of the targets wasn't built. This commit works for any case.
Issam E. Maghni
Christoph Reiter
Nick Terrell
W. Felix Handte
Yann Collet
Bimba Shrestha
Tony Theodore
Yann Collet
Taylor Braun-Jones
Niall Douglas (s [underscore] sourceforge {at} nedprod [dot] com)
Dmitri Shubin
Ephraim Park
Jonathan Scott
Nehal J Wani
Hans Johnson
Jennifer Liu
cyan4973
oleid
Varunram
Alexey Ivanov
Stella Lau
codicodi
Michael Maltese
Milan Ševčík