signs_lib removed

master
daret 2020-11-02 22:00:46 +01:00
parent c584e555e6
commit 096fb21ae6
377 changed files with 0 additions and 4371 deletions

View File

@ -1,3 +0,0 @@
description = New building blocks
signs_lib - add readable signs and colors

View File

@ -1,367 +0,0 @@
# Signs_lib API
In this text, common terms such as `pos`, `node`, or `placer`/`digger` will not be explained unless they have a different meaning than what's usually used in Minetest mods. See [minetest/doc/lua_api.txt](https://github.com/minetest/minetest/blob/master/doc/lua_api.txt) for details on these and other common terms, if necessary. Similarly, common shorthand such as `int`, `float`, etc. should require no explanation.
## Registering a sign
* `signs_lib.register_sign(nodename, def)`
To put it simply, where you'd have used `minetest.register_node()` before, just replace it with this call. The syntax is identical, and in general, all settings/items allowed there are allowed here as well. Anything that `signs_lib` doesn't need to override or alter will be passed straight through to `register_node()`, unchanged (such as `description`, `tiles`, or `inventory_image`).
The supplied node name will be prepended with ":", so that any mod can register signs under any other mod's namespace, if desired.
Many items have default settings applied when omitted, most of which would produce something equivalent to "default:sign_wall_wood" if enough other node defintion settings were to be included.
* `drawtype = "string"`
Default: "mesh"
* `tiles = {table}`
Since this is a sign-specific library, this parameter behaves rather different from what you would normally use in `minetest.register_node()`. The first two entries are mandatory. The third, fourth and fifth entries are optional, depending on which mounting styles are enabled for a given node.
* entry 1: the front and back of the sign.
* entry 2: the sides/edges
* entry 3: texture for the pole mount. If unspecified, the standard pole mount image is used, if needed.
* entry 4: texture for the hanging part. If unspecified, the standard hanging chains image is used, if needed.
* entry 5: texture for the yard sign stick. If unspecified, "default_wood.png" is used, if needed.
* entry 6: ignored.
* `mesh = "string"`
Default: "signs_lib_standard_wall_sign.obj".
* `paramtype = "string"`
Default: "light"
* `paramtype2 = "string"`
As with any other node, this determines how param2 is interpreted. Since these are signs, only two modes make sense: "wallmounted" and "facedir". Any other string is the same as "facedir".
Default: "wallmounted"
* `wield_image = "string"`
Default: whatever the `inventory_image` is set to (if anything).
* `selection_box = {table}`
Works the same as usual. A helper function exists to create boxes by specifying only and X/Y size and offset:
`signs_lib.make_selection_boxes()` (see below).
* `groups = {table}`
Sets the sign's groups, as usual. In addition to whatever arbitrary groups you may have in mind, there are two presets available (both of which have `attached_node` removed, and `sign = 1` added):
* `signs_lib.standard_wood_groups`, inherited from "default:sign_wall_wood"
* `signs_lib.standard_steel_groups`, inherited from "default:sign_wall_steel"
Default: `signs_lib.standard_wood_groups`
* `sounds = something`
Sets the sign's sound profile, as usual. In addition to whatever sound profile you may have in mind, there are two presets available:
* `signs_lib.standard_wood_sign_sounds`, inherited from "default:sign_wall_wood"
* `signs_lib.standard_steel_sign_sounds`, inherited from "default:sign_wall_steel"
Default: `signs_lib.standard_wood_sign_sounds`
* `drop = something`
Default: inherited from the `nodename` argument given to `signs_lib.register_sign()`
* `after_place_node = function(pos, placer, itemstack, pointed_thing, locked)`
See below under "Main functions".
Default: `signs_lib.after_place_node`
* `on_rightclick = function(pos)`
See below under "Main functions".
Default: `signs_lib.construct_sign`
* `on_construct = function(pos)`
See below under "Main functions".
Default: `signs_lib.construct_sign`
* `on_destruct = function(pos)`
See below under "Main functions".
Default: `signs_lib.destruct_sign`
* `on_receive_fields = function(pos, formname, fields, sender)`
See below under "Main functions".
Default: `signs_lib.receive_fields`
* `on_punch = function(pos)`
See below under "Main functions".
Default: `signs_lib.update_sign`
* `onpole_mesh = "string"`
* `hanging_mesh = "string"`
* `yard_mesh = "string"`
If your node needs a custom model for its on-pole, hanging, and/or yard variants, specify them here, as needed. The materials and textures behave the same on these as on other sign models. All sign model filenames are still derived from the base sign model, when not overridden here (so these can be totally arbitrary filenames).
Defaults: the normal "_onpole", "_hanging", or "_yard" version of the model specified by `mesh`.
* `selection_box = {table}`
* `node_box = {table}`
As usual, the former sets the sign's selection box, while the latter sets its collision information (since signs use model meshes). At the very least, you'll want to specify `selection_box`. If the sign node is in "wallmounted" mode, this must contain proper `wall_top`, `wall_side`, and `wall_bottom` entries, as one normally uses with such nodes. Signs that use "facedir" mode just need the usual `fixed` setting.
Defaults: `selection_box` is a box that fits the standard wall sign, if not specified. `node_box` takes on the value given to `selection_box`, if not specified (or the standard wall sign setting, if neither is present).
* `onpole_selection_box = {table}`
* `hanging_selection_box = {table}`
* `yard_selection_box = {table}`
* `onpole_node_box = {table}`
* `hanging_node_box = {table}`
* `yard_node_box = {table}`
If your node needs special handling for its onpole-, hanging-, or yard-mode selection boxes or for their collision info (which `signs_lib` always uses the node's `node_box` item for), you can specify them here. Same syntax as the regular `selection_box` setting.
Defaults: whatever the `selection_box` and `node_box` entries are set to.
* `default_color = "string"`
Sets the default text color for this sign, in hexadecimal (one digit, lowercase), from the standard Linux/IRC/CGA color palette. Same as the colors shown in the sign's formspec.
Default: "0" (black)
* `number_of_lines = int`
Just what it says on the tin. How many lines you can fit will vary with overall sign node size, font size, scaling, line spacing, etc.
Default: 6
* `horiz_scaling = float`
* `vert_scaling = float`
Scaling factor applied to the entity texture horizontal or vertical resolution. Larger values increase the resolution. Since a given sign's entity is always displayed at a fixed visual scale, increasing these squeezes more pixels into the same space, making the text appear narrower or shorter. Increasing `vert_scaling` also increases the number of lines of text the sign will hold.
Defaults: 1.0 for both
* `line_spacing = int`
Number of blank pixels to add between lines.
Default: 1
* `font_size = int`
Selects which font to use, either 15 or 31 (pixel height). This setting directly affects the sign's vertical resolution.
Default: 15
* `x_offset = int`
* `y_offset = int`
Starting X and Y position in pixels, relative to the text entity UV map upper-left corner.
Defaults: 4 for X, 0 for Y
* `chars_per_line = int`
Approximate number of characters that should fit on a line. This, the selected font's average character width, and the `horiz_scaling` together set the horizontal resolution of the text entity's texture.
Default: 35
* `entity_info = something`
Describes the entity model and yaw table to use. May be one of:
* A table specifying the two settings directly, such as:
```lua
entity_info = {
mesh = "signs_lib_standard_wall_sign_entity.obj",
yaw = signs_lib.wallmounted_yaw
}
```
* `signs_lib.standard_yaw` is also available as a yaw preset, if desired.
* a string reading "standard", which tells `signs_lib` to use the standard wood/steel sign model, in wallmounted mode. Equivalent to the example above.
* nothing at all: if omitted, the sign will not have a formspec, basically all text-related settings will be ignored and/or omitted entirely, and no entity will be spawned for this sign, thus the sign will not be writable. This is the default, and is of course what one would want for any sign that's just an image wrapped around a model, as in most of the signs in [my street signs mod](https://forum.minetest.net/viewtopic.php?t=20866).
Default: **nil**
* `allow_hanging = bool`
* `allow_onpole = bool`
* `allow_onpole_horizontal = bool`
* `allow_yard = bool`
If **true**, these allow the registration function to create versions of the initial, base sign node that either hang from the ceiling, are mounted on a vertical pole/post, are mounted on a horizontal pole, or are free-standing, on a small stick. Their node names will be the same as the base wall sign node, except with "_hanging", "_onpole", "_onpole_horiz", or "_yard", respectively, appended to the end of the node name. If the base node name has "_wall" in it, that bit is deleted before appending the above.
These options are independent of one another.
Defaults: all **nil**
* `allow_widefont = bool`
Just what it says on the tin. If enabled, the formspec will have a little "on/off switch" left of the "Write" button, to select the font width.
Default: **nil**
* `locked = bool`
Sets this sign to be locked/owned, like the original default steel wall sign.
Default: **nil**
### Example sign definition:
```lua
signs_lib.register_sign("basic_signs:sign_wall_glass", {
description = S("Glass Sign"),
yard_mesh = "signs_lib_standard_sign_yard_two_sticks.obj",
tiles = {
{ name = "basic_signs_sign_wall_glass.png", backface_culling = true},
"basic_signs_sign_wall_glass_edges.png",
"basic_signs_pole_mount_glass.png",
nil,
nil,
"default_steel_block.png" -- the sticks on back of the yard sign model
},
inventory_image = "basic_signs_sign_wall_glass_inv.png",
default_color = "c",
locked = true,
entity_info = "standard",
sounds = default.node_sound_glass_defaults(),
groups = {cracky = 3, oddly_breakable_by_hand = 3},
allow_hanging = true,
allow_widefont = true,
allow_onpole = true,
allow_onpole_horizontal = true,
allow_yard = true,
use_texture_alpha = true,
})
```
### Main functions used within a sign definition
* `signs_lib.after_place_node(pos, placer, itemstack, pointed_thing, locked)`
Determines if the `pointed_thing` is a wall, floor, ceiling, or pole/post, and swaps the placed sign for the correct model.
* `locked`: if set to **true**, the sign's meta will be tweaked to indicate its ownership by the `placer`.
* `signs_lib.construct_sign(pos)`
Sets up the sign's formspec and infotext overlay.
* `signs_lib.destruct_sign(pos)`
Deletes the sign's entity, if any, when the sign is dug.
* `signs_lib.receive_fields(pos, formname, fields, sender)`
This handles the text input and wide font on/off switch, logging any actions the user takes. Bails-out silently if the user is not allowed to edit the sign. See the standard Minetest lua_api.txt for details.
* `signs_lib.update_sign(pos, fields)`
If the sign's writable, this deletes any sign-related entities in the sign's node space, spawns a new one, and renders whatever text is in the sign's meta.
* `signs_lib.can_modify(pos, player)`
Returns **true** if the player is allowed to dig, edit, or change the font width of the sign.
* `signs_lib.handle_rotation(pos, node, player, mode)`
Just what it says on the tin. Limits the sign's rotation as needed (for example, a sign on a horizontal pole can only flip from one side to the other).
* `mode`: the screwdriver's mode, as passed from the screwdriver mod.
Returns **false** if the user tried to right-click with the screwdriver, **true** otherwise.
* `signs_lib.make_selection_boxes(x_size, y_size, foo, x_offset, y_offset, z_offset, is_facedir)`
* `x_size`/`y_size`: dimensions in inches. One node is 39.37 inches on a side. This function uses inches instead of metric because it started out as a selection box maker for [MUTCD-2009](https://mutcd.fhwa.dot.gov/pdfs/2009r1r2/mutcd2009r1r2edition.pdf)-compliant signs, which are measured in inches.
* `x_offset`/`y_offset`/`z_offset`: shift the selection box (inches, defaults to centered, with the back face flush with the back of the node).
* `is_facedir`: if unset, the selection boxes will be created with the assumption that `paramtype2 = "wallmounted"` mode is set on the node the box will be used on. Any other value creates a selection box for "facedir" mode.
* `foo` is ignored (leftover from an argument that's long since been rendered obsolete.
Returns a table suitable for the `selection_box` node definition entry.
#### Helper functions
You probably won't need to call any of these directly.
* `signs_lib.read_image_size(filename)`
Returns width and height of the indicated PNG file (return values will be gibberish if it isn't a PNG).
* `signs_lib.split_lines_and_words(text)`
Just what it says on the tin.
Returns a table of lines, each line entry being a table of words.
* `signs_lib.delete_objects(pos)`
Deletes all entities within the node space given by `pos`.
* `signs_lib.spawn_entity(pos, texture)`
Spawns a new text entity at the given position and assigns the supplied `texture` to it, if any.
* `signs_lib.check_for_pole(pos, pointed_thing)`
Attempts to determine if the `pointed_thing` qualifies as a vertical pole or post of some kind.
Returns **true** if a suitable pole/post is found
* `signs_lib.check_for_horizontal_pole(pos, pointed_thing)`
Same idea, but for horizontal poles/posts.
Returns **true** if a suitable pole/post is found.
* `signs_lib.check_for_ceiling(pointed_thing)`
Returns **true** if the `pointed_thing` appears to be the bottom of a node.
* `signs_lib.check_for_floor(pointed_thing)`
Returns **true** if the `pointed_thing` appears to be the top of a node.
* `signs_lib.set_obj_text(pos, text)`
Cooks the supplied `text` as needed and passes it to the entity rendering code. Essentially, this is where rendering text into an image starts.
## Options for pole/post nodes
Occasionally, you'll run into a node that either looks like a pole/post, or has one in the middle of its node space (with room to fit a sign in there), but which isn't detected as a pole/post by the standard sign placement code. In these situations, some kind of special check is needed.
Supplying one or both of the following in the pole/post node's definition will cause `signs_lib` to skip its usual pole/post detection code, in favor of the supplied function(s).
* `check_for_pole = function(pos, node, def, pole_pos, pole_node, pole_def)`
If supplied, this function will be run when the mod is looking for a normal vertical pole/post. Useful if the target node's orientation and/or shape determine what sides a sign can attach to. For example, [Pipeworks](https://forum.minetest.net/viewtopic.php?pid=27794) uses this to figure out if a sign can be attached to a tube or pipe, depending on the tube's/pipe's number of junctions, and on its orientation and that of the placed sign.
* `def`: the placed sign's node defintion
* `pole_pos`: the target node's position
* `pole_node`: the target node itself
* `pole_def`: its node definition
Your code must return **true** if the sign should attach to the target node.
If desired, this entry may simply be set to `check_for_pole = true` if a sign can always attach to this node regardless of facing direction (for example, [Home Decor](https://forum.minetest.net/viewtopic.php?pid=26061) has a round brass pole/post, which always stands vertical, and [Cottages](https://forum.minetest.net/viewtopic.php?id=5120) has a simple table that's basically a fencepost with a platform on top).
* `check_for_horiz_pole = function(pos, node, def, pole_pos, pole_node, pole_def)`
If supplied, this does the same thing for horizontal poles.
Your code must return **true** if the sign should attach to the target node.

View File

@ -1,600 +0,0 @@
License for code: LGPL 3.0
License for media and all other assets: CC-by-SA 4.0
###############################################################################
GNU LESSER GENERAL PUBLIC LICENSE
Version 3, 29 June 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
This version of the GNU Lesser General Public License incorporates
the terms and conditions of version 3 of the GNU General Public
License, supplemented by the additional permissions listed below.
0. Additional Definitions.
As used herein, "this License" refers to version 3 of the GNU Lesser
General Public License, and the "GNU GPL" refers to version 3 of the GNU
General Public License.
"The Library" refers to a covered work governed by this License,
other than an Application or a Combined Work as defined below.
An "Application" is any work that makes use of an interface provided
by the Library, but which is not otherwise based on the Library.
Defining a subclass of a class defined by the Library is deemed a mode
of using an interface provided by the Library.
A "Combined Work" is a work produced by combining or linking an
Application with the Library. The particular version of the Library
with which the Combined Work was made is also called the "Linked
Version".
The "Minimal Corresponding Source" for a Combined Work means the
Corresponding Source for the Combined Work, excluding any source code
for portions of the Combined Work that, considered in isolation, are
based on the Application, and not on the Linked Version.
The "Corresponding Application Code" for a Combined Work means the
object code and/or source code for the Application, including any data
and utility programs needed for reproducing the Combined Work from the
Application, but excluding the System Libraries of the Combined Work.
1. Exception to Section 3 of the GNU GPL.
You may convey a covered work under sections 3 and 4 of this License
without being bound by section 3 of the GNU GPL.
2. Conveying Modified Versions.
If you modify a copy of the Library, and, in your modifications, a
facility refers to a function or data to be supplied by an Application
that uses the facility (other than as an argument passed when the
facility is invoked), then you may convey a copy of the modified
version:
a) under this License, provided that you make a good faith effort to
ensure that, in the event an Application does not supply the
function or data, the facility still operates, and performs
whatever part of its purpose remains meaningful, or
b) under the GNU GPL, with none of the additional permissions of
this License applicable to that copy.
3. Object Code Incorporating Material from Library Header Files.
The object code form of an Application may incorporate material from
a header file that is part of the Library. You may convey such object
code under terms of your choice, provided that, if the incorporated
material is not limited to numerical parameters, data structure
layouts and accessors, or small macros, inline functions and templates
(ten or fewer lines in length), you do both of the following:
a) Give prominent notice with each copy of the object code that the
Library is used in it and that the Library and its use are
covered by this License.
b) Accompany the object code with a copy of the GNU GPL and this license
document.
4. Combined Works.
You may convey a Combined Work under terms of your choice that,
taken together, effectively do not restrict modification of the
portions of the Library contained in the Combined Work and reverse
engineering for debugging such modifications, if you also do each of
the following:
a) Give prominent notice with each copy of the Combined Work that
the Library is used in it and that the Library and its use are
covered by this License.
b) Accompany the Combined Work with a copy of the GNU GPL and this license
document.
c) For a Combined Work that displays copyright notices during
execution, include the copyright notice for the Library among
these notices, as well as a reference directing the user to the
copies of the GNU GPL and this license document.
d) Do one of the following:
0) Convey the Minimal Corresponding Source under the terms of this
License, and the Corresponding Application Code in a form
suitable for, and under terms that permit, the user to
recombine or relink the Application with a modified version of
the Linked Version to produce a modified Combined Work, in the
manner specified by section 6 of the GNU GPL for conveying
Corresponding Source.
1) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (a) uses at run time
a copy of the Library already present on the user's computer
system, and (b) will operate properly with a modified version
of the Library that is interface-compatible with the Linked
Version.
e) Provide Installation Information, but only if you would otherwise
be required to provide such information under section 6 of the
GNU GPL, and only to the extent that such information is
necessary to install and execute a modified version of the
Combined Work produced by recombining or relinking the
Application with a modified version of the Linked Version. (If
you use option 4d0, the Installation Information must accompany
the Minimal Corresponding Source and Corresponding Application
Code. If you use option 4d1, you must provide the Installation
Information in the manner specified by section 6 of the GNU GPL
for conveying Corresponding Source.)
5. Combined Libraries.
You may place library facilities that are a work based on the
Library side by side in a single library together with other library
facilities that are not Applications and are not covered by this
License, and convey such a combined library under terms of your
choice, if you do both of the following:
a) Accompany the combined library with a copy of the same work based
on the Library, uncombined with any other library facilities,
conveyed under the terms of this License.
b) Give prominent notice with the combined library that part of it
is a work based on the Library, and explaining where to find the
accompanying uncombined form of the same work.
6. Revised Versions of the GNU Lesser General Public License.
The Free Software Foundation may publish revised and/or new versions
of the GNU Lesser General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the
Library as you received it specifies that a certain numbered version
of the GNU Lesser General Public License "or any later version"
applies to it, you have the option of following the terms and
conditions either of that published version or of any later version
published by the Free Software Foundation. If the Library as you
received it does not specify a version number of the GNU Lesser
General Public License, you may choose any version of the GNU Lesser
General Public License ever published by the Free Software Foundation.
If the Library as you received it specifies that a proxy can decide
whether future versions of the GNU Lesser General Public License shall
apply, that proxy's public statement of acceptance of any version is
permanent authorization for you to choose that version for the
Library.
###############################################################################
Attribution-ShareAlike 4.0 International
=======================================================================
Creative Commons Corporation ("Creative Commons") is not a law firm and
does not provide legal services or legal advice. Distribution of
Creative Commons public licenses does not create a lawyer-client or
other relationship. Creative Commons makes its licenses and related
information available on an "as-is" basis. Creative Commons gives no
warranties regarding its licenses, any material licensed under their
terms and conditions, or any related information. Creative Commons
disclaims all liability for damages resulting from their use to the
fullest extent possible.
Using Creative Commons Public Licenses
Creative Commons public licenses provide a standard set of terms and
conditions that creators and other rights holders may use to share
original works of authorship and other material subject to copyright
and certain other rights specified in the public license below. The
following considerations are for informational purposes only, are not
exhaustive, and do not form part of our licenses.
Considerations for licensors: Our public licenses are
intended for use by those authorized to give the public
permission to use material in ways otherwise restricted by
copyright and certain other rights. Our licenses are
irrevocable. Licensors should read and understand the terms
and conditions of the license they choose before applying it.
Licensors should also secure all rights necessary before
applying our licenses so that the public can reuse the
material as expected. Licensors should clearly mark any
material not subject to the license. This includes other CC-
licensed material, or material used under an exception or
limitation to copyright. More considerations for licensors:
wiki.creativecommons.org/Considerations_for_licensors
Considerations for the public: By using one of our public
licenses, a licensor grants the public permission to use the
licensed material under specified terms and conditions. If
the licensor's permission is not necessary for any reason--for
example, because of any applicable exception or limitation to
copyright--then that use is not regulated by the license. Our
licenses grant only permissions under copyright and certain
other rights that a licensor has authority to grant. Use of
the licensed material may still be restricted for other
reasons, including because others have copyright or other
rights in the material. A licensor may make special requests,
such as asking that all changes be marked or described.
Although not required by our licenses, you are encouraged to
respect those requests where reasonable. More considerations
for the public:
wiki.creativecommons.org/Considerations_for_licensees
=======================================================================
Creative Commons Attribution-ShareAlike 4.0 International Public
License
By exercising the Licensed Rights (defined below), You accept and agree
to be bound by the terms and conditions of this Creative Commons
Attribution-ShareAlike 4.0 International Public License ("Public
License"). To the extent this Public License may be interpreted as a
contract, You are granted the Licensed Rights in consideration of Your
acceptance of these terms and conditions, and the Licensor grants You
such rights in consideration of benefits the Licensor receives from
making the Licensed Material available under these terms and
conditions.
Section 1 -- Definitions.
a. Adapted Material means material subject to Copyright and Similar
Rights that is derived from or based upon the Licensed Material
and in which the Licensed Material is translated, altered,
arranged, transformed, or otherwise modified in a manner requiring
permission under the Copyright and Similar Rights held by the
Licensor. For purposes of this Public License, where the Licensed
Material is a musical work, performance, or sound recording,
Adapted Material is always produced where the Licensed Material is
synched in timed relation with a moving image.
b. Adapter's License means the license You apply to Your Copyright
and Similar Rights in Your contributions to Adapted Material in
accordance with the terms and conditions of this Public License.
c. BY-SA Compatible License means a license listed at
creativecommons.org/compatiblelicenses, approved by Creative
Commons as essentially the equivalent of this Public License.
d. Copyright and Similar Rights means copyright and/or similar rights
closely related to copyright including, without limitation,
performance, broadcast, sound recording, and Sui Generis Database
Rights, without regard to how the rights are labeled or
categorized. For purposes of this Public License, the rights
specified in Section 2(b)(1)-(2) are not Copyright and Similar
Rights.
e. Effective Technological Measures means those measures that, in the
absence of proper authority, may not be circumvented under laws
fulfilling obligations under Article 11 of the WIPO Copyright
Treaty adopted on December 20, 1996, and/or similar international
agreements.
f. Exceptions and Limitations means fair use, fair dealing, and/or
any other exception or limitation to Copyright and Similar Rights
that applies to Your use of the Licensed Material.
g. License Elements means the license attributes listed in the name
of a Creative Commons Public License. The License Elements of this
Public License are Attribution and ShareAlike.
h. Licensed Material means the artistic or literary work, database,
or other material to which the Licensor applied this Public
License.
i. Licensed Rights means the rights granted to You subject to the
terms and conditions of this Public License, which are limited to
all Copyright and Similar Rights that apply to Your use of the
Licensed Material and that the Licensor has authority to license.
j. Licensor means the individual(s) or entity(ies) granting rights
under this Public License.
k. Share means to provide material to the public by any means or
process that requires permission under the Licensed Rights, such
as reproduction, public display, public performance, distribution,
dissemination, communication, or importation, and to make material
available to the public including in ways that members of the
public may access the material from a place and at a time
individually chosen by them.
l. Sui Generis Database Rights means rights other than copyright
resulting from Directive 96/9/EC of the European Parliament and of
the Council of 11 March 1996 on the legal protection of databases,
as amended and/or succeeded, as well as other essentially
equivalent rights anywhere in the world.
m. You means the individual or entity exercising the Licensed Rights
under this Public License. Your has a corresponding meaning.
Section 2 -- Scope.
a. License grant.
1. Subject to the terms and conditions of this Public License,
the Licensor hereby grants You a worldwide, royalty-free,
non-sublicensable, non-exclusive, irrevocable license to
exercise the Licensed Rights in the Licensed Material to:
a. reproduce and Share the Licensed Material, in whole or
in part; and
b. produce, reproduce, and Share Adapted Material.
2. Exceptions and Limitations. For the avoidance of doubt, where
Exceptions and Limitations apply to Your use, this Public
License does not apply, and You do not need to comply with
its terms and conditions.
3. Term. The term of this Public License is specified in Section
6(a).
4. Media and formats; technical modifications allowed. The
Licensor authorizes You to exercise the Licensed Rights in
all media and formats whether now known or hereafter created,
and to make technical modifications necessary to do so. The
Licensor waives and/or agrees not to assert any right or
authority to forbid You from making technical modifications
necessary to exercise the Licensed Rights, including
technical modifications necessary to circumvent Effective
Technological Measures. For purposes of this Public License,
simply making modifications authorized by this Section 2(a)
(4) never produces Adapted Material.
5. Downstream recipients.
a. Offer from the Licensor -- Licensed Material. Every
recipient of the Licensed Material automatically
receives an offer from the Licensor to exercise the
Licensed Rights under the terms and conditions of this
Public License.
b. Additional offer from the Licensor -- Adapted Material.
Every recipient of Adapted Material from You
automatically receives an offer from the Licensor to
exercise the Licensed Rights in the Adapted Material
under the conditions of the Adapter's License You apply.
c. No downstream restrictions. You may not offer or impose
any additional or different terms or conditions on, or
apply any Effective Technological Measures to, the
Licensed Material if doing so restricts exercise of the
Licensed Rights by any recipient of the Licensed
Material.
6. No endorsement. Nothing in this Public License constitutes or
may be construed as permission to assert or imply that You
are, or that Your use of the Licensed Material is, connected
with, or sponsored, endorsed, or granted official status by,
the Licensor or others designated to receive attribution as
provided in Section 3(a)(1)(A)(i).
b. Other rights.
1. Moral rights, such as the right of integrity, are not
licensed under this Public License, nor are publicity,
privacy, and/or other similar personality rights; however, to
the extent possible, the Licensor waives and/or agrees not to
assert any such rights held by the Licensor to the limited
extent necessary to allow You to exercise the Licensed
Rights, but not otherwise.
2. Patent and trademark rights are not licensed under this
Public License.
3. To the extent possible, the Licensor waives any right to
collect royalties from You for the exercise of the Licensed
Rights, whether directly or through a collecting society
under any voluntary or waivable statutory or compulsory
licensing scheme. In all other cases the Licensor expressly
reserves any right to collect such royalties.
Section 3 -- License Conditions.
Your exercise of the Licensed Rights is expressly made subject to the
following conditions.
a. Attribution.
1. If You Share the Licensed Material (including in modified
form), You must:
a. retain the following if it is supplied by the Licensor
with the Licensed Material:
i. identification of the creator(s) of the Licensed
Material and any others designated to receive
attribution, in any reasonable manner requested by
the Licensor (including by pseudonym if
designated);
ii. a copyright notice;
iii. a notice that refers to this Public License;
iv. a notice that refers to the disclaimer of
warranties;
v. a URI or hyperlink to the Licensed Material to the
extent reasonably practicable;
b. indicate if You modified the Licensed Material and
retain an indication of any previous modifications; and
c. indicate the Licensed Material is licensed under this
Public License, and include the text of, or the URI or
hyperlink to, this Public License.
2. You may satisfy the conditions in Section 3(a)(1) in any
reasonable manner based on the medium, means, and context in
which You Share the Licensed Material. For example, it may be
reasonable to satisfy the conditions by providing a URI or
hyperlink to a resource that includes the required
information.
3. If requested by the Licensor, You must remove any of the
information required by Section 3(a)(1)(A) to the extent
reasonably practicable.
b. ShareAlike.
In addition to the conditions in Section 3(a), if You Share
Adapted Material You produce, the following conditions also apply.
1. The Adapter's License You apply must be a Creative Commons
license with the same License Elements, this version or
later, or a BY-SA Compatible License.
2. You must include the text of, or the URI or hyperlink to, the
Adapter's License You apply. You may satisfy this condition
in any reasonable manner based on the medium, means, and
context in which You Share Adapted Material.
3. You may not offer or impose any additional or different terms
or conditions on, or apply any Effective Technological
Measures to, Adapted Material that restrict exercise of the
rights granted under the Adapter's License You apply.
Section 4 -- Sui Generis Database Rights.
Where the Licensed Rights include Sui Generis Database Rights that
apply to Your use of the Licensed Material:
a. for the avoidance of doubt, Section 2(a)(1) grants You the right
to extract, reuse, reproduce, and Share all or a substantial
portion of the contents of the database;
b. if You include all or a substantial portion of the database
contents in a database in which You have Sui Generis Database
Rights, then the database in which You have Sui Generis Database
Rights (but not its individual contents) is Adapted Material,
including for purposes of Section 3(b); and
c. You must comply with the conditions in Section 3(a) if You Share
all or a substantial portion of the contents of the database.
For the avoidance of doubt, this Section 4 supplements and does not
replace Your obligations under this Public License where the Licensed
Rights include other Copyright and Similar Rights.
Section 5 -- Disclaimer of Warranties and Limitation of Liability.
a. UNLESS OTHERWISE SEPARATELY UNDERTAKEN BY THE LICENSOR, TO THE
EXTENT POSSIBLE, THE LICENSOR OFFERS THE LICENSED MATERIAL AS-IS
AND AS-AVAILABLE, AND MAKES NO REPRESENTATIONS OR WARRANTIES OF
ANY KIND CONCERNING THE LICENSED MATERIAL, WHETHER EXPRESS,
IMPLIED, STATUTORY, OR OTHER. THIS INCLUDES, WITHOUT LIMITATION,
WARRANTIES OF TITLE, MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, NON-INFRINGEMENT, ABSENCE OF LATENT OR OTHER DEFECTS,
ACCURACY, OR THE PRESENCE OR ABSENCE OF ERRORS, WHETHER OR NOT
KNOWN OR DISCOVERABLE. WHERE DISCLAIMERS OF WARRANTIES ARE NOT
ALLOWED IN FULL OR IN PART, THIS DISCLAIMER MAY NOT APPLY TO YOU.
b. TO THE EXTENT POSSIBLE, IN NO EVENT WILL THE LICENSOR BE LIABLE
TO YOU ON ANY LEGAL THEORY (INCLUDING, WITHOUT LIMITATION,
NEGLIGENCE) OR OTHERWISE FOR ANY DIRECT, SPECIAL, INDIRECT,
INCIDENTAL, CONSEQUENTIAL, PUNITIVE, EXEMPLARY, OR OTHER LOSSES,
COSTS, EXPENSES, OR DAMAGES ARISING OUT OF THIS PUBLIC LICENSE OR
USE OF THE LICENSED MATERIAL, EVEN IF THE LICENSOR HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH LOSSES, COSTS, EXPENSES, OR
DAMAGES. WHERE A LIMITATION OF LIABILITY IS NOT ALLOWED IN FULL OR
IN PART, THIS LIMITATION MAY NOT APPLY TO YOU.
c. The disclaimer of warranties and limitation of liability provided
above shall be interpreted in a manner that, to the extent
possible, most closely approximates an absolute disclaimer and
waiver of all liability.
Section 6 -- Term and Termination.
a. This Public License applies for the term of the Copyright and
Similar Rights licensed here. However, if You fail to comply with
this Public License, then Your rights under this Public License
terminate automatically.
b. Where Your right to use the Licensed Material has terminated under
Section 6(a), it reinstates:
1. automatically as of the date the violation is cured, provided
it is cured within 30 days of Your discovery of the
violation; or
2. upon express reinstatement by the Licensor.
For the avoidance of doubt, this Section 6(b) does not affect any
right the Licensor may have to seek remedies for Your violations
of this Public License.
c. For the avoidance of doubt, the Licensor may also offer the
Licensed Material under separate terms or conditions or stop
distributing the Licensed Material at any time; however, doing so
will not terminate this Public License.
d. Sections 1, 5, 6, 7, and 8 survive termination of this Public
License.
Section 7 -- Other Terms and Conditions.
a. The Licensor shall not be bound by any additional or different
terms or conditions communicated by You unless expressly agreed.
b. Any arrangements, understandings, or agreements regarding the
Licensed Material not stated herein are separate from and
independent of the terms and conditions of this Public License.
Section 8 -- Interpretation.
a. For the avoidance of doubt, this Public License does not, and
shall not be interpreted to, reduce, limit, restrict, or impose
conditions on any use of the Licensed Material that could lawfully
be made without permission under this Public License.
b. To the extent possible, if any provision of this Public License is
deemed unenforceable, it shall be automatically reformed to the
minimum extent necessary to make it enforceable. If the provision
cannot be reformed, it shall be severed from this Public License
without affecting the enforceability of the remaining terms and
conditions.
c. No term or condition of this Public License will be waived and no
failure to comply consented to unless expressly agreed to by the
Licensor.
d. Nothing in this Public License constitutes or may be interpreted
as a limitation upon, or waiver of, any privileges and immunities
that apply to the Licensor or You, including from the legal
processes of any jurisdiction or authority.
=======================================================================
Creative Commons is not a party to its public
licenses. Notwithstanding, Creative Commons may elect to apply one of
its public licenses to material it publishes and in those instances
will be considered the “Licensor.” The text of the Creative Commons
public licenses is dedicated to the public domain under the CC0 Public
Domain Dedication. Except for the limited purpose of indicating that
material is shared under a Creative Commons public license or as
otherwise permitted by the Creative Commons policies published at
creativecommons.org/policies, Creative Commons does not authorize the
use of the trademark "Creative Commons" or any other trademark or logo
of Creative Commons without its prior written consent including,
without limitation, in connection with any unauthorized modifications
to any of its public licenses or any other arrangements,
understandings, or agreements concerning use of licensed material. For
the avoidance of doubt, this paragraph does not form part of the
public licenses.
Creative Commons may be contacted at creativecommons.org.

View File

@ -1,104 +0,0 @@
# Anatomy of a sign model
In the model files:
* The base sign model should be designed to look like a flat board placed on one side of the node space. The first material entry in the model file must be assigned to the front and back faces of the sign, the second material must be the sign's edges. The filename should be something along the lines of "mymod_my_cool_sign_wall.obj".
In each of the variants below, generally-speaking, the third material in the model must be assigned to whatever it is that that model uses for the sign's mounting method, and the mounting style will be the last word in the model filename.
* For most signs that are allowed to sit on a vertical pole/post such as a fencepost, the pole-mounted model is just a copy of the base model, shifted back a bit, with a pole mount added to the back. In these models, the third material in the model file must be assigned to the pole mount. Name the model file the same as the base sign, but end the name with "_onpole" instead of "_wall". For example, "mymod_my_cool_sign_onpole.obj".
For signs that allow mounting onto a horizontal pole (such as a Streets mod horizontal "bigpole"), the third material is still the vertical pole mount as above, but there must also be another the pole mount included, designed to wrap around such a pole/post, to which fourth material must be assigned. In most cases, this alternate mount will just be a copy of the vertical pole mount, but rotated by 90°, and explicitly centered vertically in the node space.
While vertical and horizontal pole/post mounting options are independent in the code, if horizontal mounting is enabled, the on-pole model must still have *four* materials, even if the third material is unused, with the horizontal pole mount assigned to the fourth material. In most situations, you'll probably have both vertical and horizontal pole mounts assigned to the third and fourth materials, as above.
* For hanging sign models, the third material must be assigned to whatever it is that makes the sign look like it's hanging from the ceiling (default signs have a simple, flat rectangle, meant to show an image of a simple pair of chains). The model file for these must be named the same as the base model, but ending with "_hanging". For example, "mymod_my_cool_sign_hanging.obj".
* For yard sign models, the third material must be assigned to the "stick" on the back of the sign. The model for this type must be named the same as the base model, but ending with "_yard". For example, "mymod_my_cool_sign_yard.obj".
* For most signs, the sign entity (if applicable) will be a simple rectangle, sized just slightly smaller than the width and height of the sign, and centered relative to the sign face. Its UV map should cover the entire image area, so that the image is shrunk down to fit within the sign's intended text area. The rectangle must be positioned slightly in front of the sign (by 10 millimeters or so, due to engine position precision limitations).
The entity should be named the same as the corresponding wall, on-pole, hanging, and/or yard models, but with "_entity" added just before the mounting style. For example: a sign using "mymod_my_cool_sign_wall.obj" for the base model file should have an entity model file named "mymod_my_cool_sign_entity_wall.obj", if one will be needed.
In your code:
* The first `tiles{}` entry in the sign definition needs to be the front-back texture (how things are arranged within the image file is up to you, provided you match your sign model's UV map to the layout of your image). The second entry will be the texture for the sign's edges.
* For signs that can be mounted on a pole/post, the third item in your `tiles{}` setting specifies the pole mount image to use. When `signs_lib` goes to register the on-pole node(s), the image you specified here will be passed to `register_node()` as either the third or *fourth* tile item, setting the other to the standard blank/empty image, thus revealing only the vertical or horizontal pole mount, respectively. If you don't specify a pole mount image, the standard pole mount texture will be used instead, if needed.
* For signs that can hang from a ceiling, the fourth entry in your `tiles{}` setting specifies the image to apply to the part of the model that makes it look like it's hanging. If not specified, the standard hanging chains image will be used instead, if needed.
* For signs that can stand up in the yard, the fifth `tiles{}` entry specifies the image to be wrapped around the "stick" that the sign's mounted on. If not specified, "default_wood.png" will be used instead, if needed.
* Some signs may allow for more complex entity shapes, images, and UV mapping. For example, [street_signs](https://forum.minetest.net/viewtopic.php?t=20866) has a standard city street intersection sign, the entity mesh for which consists of four simple rectangles. Two of them are identically UV-mapped to the top portion of the texture image, and placed on either side of the upper half of the sign portion of the model. The other two rectangles are also identically UV-mapped, but point to a lower section of the texture, and are rotated by 90° and shifted down in the model, to place them on either side of the lower half of the sign. This causes the first line of text to appear on both sides of the upper half of the sign, with the second line of text appearing on both sides of the lower half.
Signs which don't use the simple models described above may not be compatible with the wall/pole/ceiling/yard placement code, but these things can be overridden/disabled in the node definition, if needed (as with the above intersection sign).
* `signs_lib` automatically blanks-out all redundant `tiles{}` entries for each node.
## Blender users
Start a new project, open the "Sidebar" (usually by pressing `N`), and scroll down to the Display section. Set the Grid floor to 5 lines, Scale to 0.5, and Subdivisions to 8.
This will create an environment where the world origin/center will be the center of a node space at (0,0,0), with major divisions at half-node intervals. With the camera aligned to an axis, zooming in so that one node space fills the window should put the grid at 16 minor divisions per meter, so the grid will correspond to pixels in a typical 16px-apparent texture, if your UV mapping is correct (though a standard sign model uses 32px-apparent textures).
Zoom in a bit more, and you'll see 256 divisions per meter, which can be thought of as 16 divisions per pixel. This is where you'll want to be when positioning the sign entity. In my configuration, the grid maxes out at 256 divisions per meter, even when zoomed in extremely close (this may be standard behavior).
For signs that will use "wallmounted" mode, the model must be lying flat, with its front side facing up along Blender's Z axis, and centered on the X and Y axes. The back of the sign should be exactly flush with the -0.5m mark on the Z axis, putting the whole sign below the world center. The bottom edge of the sign faces the negative end of the Y axis.
For signs that will use "facedir" mode, the sign must be upright, with its back flush with the +0.5m mark along the Y axis, centered on X/Z, with the bottom edge of the sign facing down along the Z axis.
When adding materials, you MUST add them in the order you want them to appear in the exported model, as Blender provides no easy way to enforce a particular order if they come out wrong.
If you look in the `models/` directory, you'll find the standard sign project file, "standard wooden sign.blend", which contains all four variants of the standard sign model ("wallmounted" and "facedir", on-wall and on-pole), designed per the above requirements. This file also contains both entity variants (on-wall and on-pole). You'll notice that there are only two entities. This is because entity rotation has no concept of "wallmounted", "facedir", etc., so all standard signs use the same pair of entities.
To create the text entity model, assuming you're starting with a properly-UV-mapped, "wallmounted" base sign model with a simple one-piece flat design (comparable to, say, a standard wall sign or a [street_signs](https://forum.minetest.net/viewtopic.php?t=20866) warning diamond), do these steps:
1. Snap the cursor to the world center, and set your viewport to Orthographic (usually `5` on the keypad).
2. Switch to Object Mode.
3. Select the sign model.
4. Create a linked duplicate (`Alt-D` in my keymap), as distinct from a simple duplicate (`Shift-D`). Blender will automatically select the duplicate and immediately go into move/translate mode to let you move it around.
5. Without bothering to move the duplicate, press `R` `X` to go into rotatation mode around the X axis, which will also snap the duplicate back to its precise starting point in the process.
6. Rotate the duplicate by 90°, thus putting it upright, with its back side flush with the +0.5m mark on the Y axis.
7. With the duplicate still selected, switch to Edit Mode.
8. Select only the duplicate sign's front face.
9. Rotate your view to the right or left side (usually `3` or `Ctrl-3` on the keypad).
10. Zoom in close enough to get the grid to show 256 divisions per meter, while keeping the selected face in view.
11. Make a simple duplicate of the selected face (`Shift-D`). Blender will automatically select just the new, duplicate face and go into move/translate mode. Yeah, you're making a copy of a copy. 🙂
12. Press `Y` to limit movement to just the Y axis, and move the duplicate face in the negative direction, while snapping to the grid. Put it at least 2 minor divisions from the front of the sign (that is, 2/256 of a meter).
13. Zoom out far enough to get the grid back to 16 divisions per meter, and align your view forward along the Y axis (usually `1` on the keypad).
14. With the duplicate face still selected, scale it along X and/or Z until its edges are just within the limits of your sign model's intended text area. You could also directly move the face's edges inward, perhaps while snapping to the grid, if the sign shape lends itself to that. Make sure the face stays properly-positioned (usually centered) relative to the sign's front!
15. UV-map the duplicate face: `Mesh``UV Unwrap``Reset` followed by `Mesh``UV Unwrap``Project from view (bounds)`.
16. Separate the duplicate face into a new object (`P` in my keymap, then `Selection` in the menu that pops-up).
17. Switch to Object Mode
18. In the model/data tree at the upper-right (well, on my layout), rename the original sign mesh, its duplicate, and the entity mesh to something meaningful.
19. With only the text entity mesh selected, delete all materials from the list on the right, below the model/data tree (these were inherited from the base sign, and aren't needed with an entity mesh).
20. Save your project file.
21. Export the text entity mesh. It is highly recommended that you export to "Wavefront (.obj)" format, as with most other Minetest node models.
Note that the duplicate sign model you created can also be used directly as a "facedir" sign model, as well as being a position reference for the text entity mesh, so I suggest leaving it in your project file when you save.
Use the following export settings (I strongly advise saving them as an Operator Preset; applies to all models and modes):
Forward: [_Z_Forward_]
Up: [_Y_Up______]
🆇 Selection Only
🞎 Animation
🆇 Apply Modifiers
🞎 Use Modifiers Render Settings
🞎 Include Edges
🞎 Smooth Groups
🞎 Bitflag Smooth Groups
🆇 Write Normals
🆇 Include UVs
🞎 Write Materials
🞎 Triangulate Faces
🞎 Write Nurbs
🞎 Polygroups
🆇 Objects as OBJ Objects
🞎 Objects as OBJ Groups
🆇 Material Groups
🞎 Keep Vertex Order
(_Scale:________1.00_)
Path Mode: [_Auto____]

View File

@ -1,57 +0,0 @@
# signs_lib
This is kaeza's and my signs library mod, originally forked from PilzAdam's version and rewritten mostly by kaeza to include a number of new features, then rewritten again a couple more times (finding its way into my [street_signs](https://forum.minetest.net/viewtopic.php?t=20866) mod for a while, where it developed nicely 🙂).
The purpose of PilzAdam's original mod was to just provide a no-frills way make default signs show their text, via an entity placed right in front. It was hacky, but it worked!
While still hacky, this library is a modernized, feature-enhanced version of his code, which not only has visible text, but which allows that text to be colored, and displayed at any reasonable size, with any reasonable amount of text (as configured in a given node definition), with two font resolutions available. Plus, almost any sign can be attached to almost any kind of suitable pole or fencepost. Most signs that use the standard wall sign model can also be hung from a ceiling, or placed upright as a yard sign, in addition to being flat on a wall or floor. Unlike previous incarnations of this code, signs' text is visible when the sign is flat on the floor or ceiling, as well as all other supported orientations/mounting styles.
Without any other add-ons, this mod upgrades only the default wooden and steel signs.
## Text formatting
In general, text is rendered exactly as-written, left-to-right, top to bottom, without any translations or modifications. The standard fonts support 7-bit ASCII as well as Cyrllic.
That said, there are some basic text formatting options:
* Paragraph breaks (blank lines) may be inserted by simply hitting `Enter` twice.
* Eight arrow symbols are available, occupying positions 0x81 through 0x88 in the character set. These are produced by writing a "^" followed by a number 1 to 8:
"^1" = `⬆`, "^2" = `⬈`, "^3" = `➡`, "^4" = `⬊`, "^5" = `⬇`, "^6" = `⬋`, "^7" = `⬅`, "^8" = `⬉`
Writing "^" followed by a letter "a" through "h" will produce double-wide versions of these arrows, in the same order. These wide arrows occupy 0x89 to 0x91 in the character set.
* A color may be specified in the sign text by using "#" followed by a single hexadcimal digit (0-9 or a-f). These colors come from the standard Linux/IRC/CGA color set, and are shown in the sign's formspec. Any color change will remain in effect until changed again, or until the next line break. Any number of color changes in any arbitrary arrangement is allowed.
* Most writable signs can display double-wide text by flipping a switch in the sign's formspec.
## Sign placement and rotation notes
* Pointing at a wall while placing will, of course, place the sign on the wall.
* For most signs that use the standard sign model, pointing at the ground while placing creates an upright standalone yard sign. Others not using the standard model will most often end up flat on the ground.
* For most standard signs, pointing at the ceiling while placing will hang the sign from the ceiling by a pair of chains. Others not using the standard model will usually end up flat on the ceiling.
* Pointing at an X or Z side of something that's detected as a pole/post will mount the sign onto that pole, if possible. Note that the sign actually occupies the node space in front of the pole, since they're still separate nodes. But, I figure, no one's going to want to use the space in front of the sign anyway, because doing so would of course obscure the sign, so it doesn't matter if the sign logically occupies that node space.
* If you're holding the "Sneak" key (usually `Shift`) while placing, the on-pole/hanging/yard checks are skipped, allowing you to just place a sign flat onto the ground, ceiling, or top/bottom of a pole/post, like they used to work before `signs_lib` was a thing.
* If a sign is on the wall or flat on the ground, the screwdriver will spin it from one wall to the next, in clockwise order, whether there's a wall to attach to or not, followed by putting it flat on the ground, then flat against the ceiling, then back to wall orientation.
* If a sign is hanging from the ceiling (not flat against it), the screwdriver will just rotate it around its Y axis.
* If a sign is on a vertical pole/post, the screwdriver will rotate it around the pole, but only if there's nothing in the way.
* If a sign is on a horizontal pole/post, the screwdriver will flip it from one side to the other as long as there's nothing in the way.
## Chat commands
At present, only one command is defined:
* `/regen_signs`
This will read through the list of currently-loaded blocks known to contain one or more signs, delete all entities found in each sign's node space, and respawn and re-render each from scratch.
The list of loaded, sign-bearing blocks is created/populated by an LBM (and trimmed by this command if any listed blocks are found to have been unloaded).

File diff suppressed because it is too large Load Diff

View File

@ -1,199 +0,0 @@
local default_fences = {
"default:fence_wood",
"default:fence_acacia_wood",
"default:fence_aspen_wood",
"default:fence_junglewood",
"default:fence_pine_wood"
}
for _, n in ipairs(default_fences) do
minetest.override_item(n, {
check_for_pole = true
})
end
if minetest.get_modpath("cottages") then
local cbox = table.copy(minetest.registered_items["cottages:table"].node_box)
minetest.override_item("cottages:table", {
check_for_pole = true,
selection_box = cbox
})
end
if minetest.get_modpath("prefab_redo") then
minetest.override_item("prefab_redo:concrete_railing", {
check_for_pole = true,
selection_box = {
type = "connected",
connect_right = { -0.125, -0.5, -0.125, 0.5, 0.375, 0.125 },
connect_left = { -0.5, -0.5, -0.125, 0.125, 0.375, 0.125 },
connect_back = { -0.125, -0.5, -0.125, 0.125, 0.375, 0.5 },
connect_front = { -0.125, -0.5, -0.5, 0.125, 0.375, 0.125 },
disconnected = { -0.125, -0.5, -0.125, 0.125, 0.25, 0.125 },
fixed = {}
}
})
end
if minetest.get_modpath("streetspoles") then
local htj_north = {
[1] = true,
[3] = true,
[9] = true,
[11] = true,
[21] = true,
[23] = true
}
local htj_east = {
[0] = true,
[2] = true,
[16] = true,
[18] = true,
[20] = true,
[22] = true
}
local htj_south = {
[1] = true,
[3] = true,
[5] = true,
[7] = true,
[21] = true,
[23] = true
}
local htj_west = {
[0] = true,
[2] = true,
[12] = true,
[14] = true,
[20] = true,
[22] = true
}
local vtj_north = {
[8] = true,
[10] = true,
[13] = true,
[15] = true,
[17] = true,
[19] = true
}
local vtj_east = {
[4] = true,
[6] = true,
[8] = true,
[10] = true,
[17] = true,
[19] = true
}
local vtj_south = {
[4] = true,
[6] = true,
[13] = true,
[15] = true,
[17] = true,
[10] = true
}
local vtj_west = {
[4] = true,
[6] = true,
[8] = true,
[10] = true,
[13] = true,
[15] = true
}
minetest.override_item("streets:bigpole", {
check_for_pole = function(pos, node, def, ppos, pnode, pdef)
if pnode.param2 < 4
or (pnode.param2 > 19 and pnode.param2 < 24)
and (pos.x ~= ppos.x or pos.z ~= ppos.z) then
return true
end
end,
check_for_horiz_pole = function(pos, node, def, ppos, pnode, pdef)
if pnode.param2 > 3 and pnode.param2 < 12 then
if def.paramtype2 == "wallmounted" then
if node.param2 == 2 or node.param2 == 3 -- E/W
then return true
end
else
if node.param2 == 1 or node.param2 == 3 -- E/W
then return true
end
end
elseif pnode.param2 > 11 and pnode.param2 < 20 then
if def.paramtype2 == "wallmounted" then
if node.param2 == 4 or node.param2 == 5 then
return true
end
else
if node.param2 == 0 or node.param2 == 2 then
return true
end
end
end
end
})
minetest.override_item("streets:bigpole_tjunction", {
check_for_pole = function(pos, node, def, ppos, pnode, pdef)
if def.paramtype2 == "wallmounted" then
if (node.param2 == 4 and vtj_north[pnode.param2])
or (node.param2 == 2 and vtj_east[pnode.param2])
or (node.param2 == 5 and vtj_south[pnode.param2])
or (node.param2 == 3 and vtj_west[pnode.param2]) then
return true
end
else
if (node.param2 == 0 and vtj_north[pnode.param2])
or (node.param2 == 1 and vtj_east[pnode.param2])
or (node.param2 == 2 and vtj_south[pnode.param2])
or (node.param2 == 3 and vtj_west[pnode.param2]) then
return true
end
end
end,
check_for_horiz_pole = function(pos, node, def, ppos, pnode, pdef)
if def.paramtype2 == "wallmounted" then
if (node.param2 == 4 and htj_north[pnode.param2])
or (node.param2 == 2 and htj_east[pnode.param2])
or (node.param2 == 5 and htj_south[pnode.param2])
or (node.param2 == 3 and htj_west[pnode.param2]) then
return true
end
else
if (node.param2 == 0 and htj_north[pnode.param2])
or (node.param2 == 1 and htj_east[pnode.param2])
or (node.param2 == 2 and htj_south[pnode.param2])
or (node.param2 == 3 and htj_west[pnode.param2]) then
return true
end
end
end
})
end
if minetest.get_modpath("streetlamps") then
minetest.override_item("streets:streetlamp_basic_top_on", {
selection_box = {
type = "fixed",
fixed = {
{-0.3,-0.4,-0.3,0.3,0.5,0.3},
{-0.15,-0.4,-0.15,0.15,-1.55,0.15},
{-0.18,-1.55,-0.18,0.18,-2.5,0.18},
}
},
check_for_pole = true
})
end

View File

@ -1,4 +0,0 @@
Most code and all textures by Vanessa Dannenberg.
Some code copied and modified from the game's default mods (especially
doors) and ironzorg's flowers mod.

View File

@ -1,7 +0,0 @@
default
intllib?
screwdriver?
streetspoles?
streetlamps?
cottages?
prefab_redo?

View File

@ -1 +0,0 @@
Adds signs with readable text.

View File

@ -1,265 +0,0 @@
-- encoding borrowed from signs_lib fork at https://github.com/lord-server/lord
local ansi_decode = {
[128] = "\208\130",
[129] = "\208\131",
[130] = "\226\128\154",
[131] = "\209\147",
[132] = "\226\128\158",
[133] = "\226\128\166",
[134] = "\226\128\160",
[135] = "\226\128\161",
[136] = "\226\130\172",
[137] = "\226\128\176",
[138] = "\208\137",
[139] = "\226\128\185",
[140] = "\208\138",
[141] = "\208\140",
[142] = "\208\139",
[143] = "\208\143",
[144] = "\209\146",
[145] = "\226\128\152",
[146] = "\226\128\153",
[147] = "\226\128\156",
[148] = "\226\128\157",
[149] = "\226\128\162",
[150] = "\226\128\147",
[151] = "\226\128\148",
[152] = "\194\152",
[153] = "\226\132\162",
[154] = "\209\153",
[155] = "\226\128\186",
[156] = "\209\154",
[157] = "\209\156",
[158] = "\209\155",
[159] = "\209\159",
[160] = "\194\160",
[161] = "\209\142",
[162] = "\209\158",
[163] = "\208\136",
[164] = "\194\164",
[165] = "\210\144",
[166] = "\194\166",
[167] = "\194\167",
[168] = "\208\129",
[169] = "\194\169",
[170] = "\208\132",
[171] = "\194\171",
[172] = "\194\172",
[173] = "\194\173",
[174] = "\194\174",
[175] = "\208\135",
[176] = "\194\176",
[177] = "\194\177",
[178] = "\208\134",
[179] = "\209\150",
[180] = "\210\145",
[181] = "\194\181",
[182] = "\194\182",
[183] = "\194\183",
[184] = "\209\145",
[185] = "\226\132\150",
[186] = "\209\148",
[187] = "\194\187",
[188] = "\209\152",
[189] = "\208\133",
[190] = "\209\149",
[191] = "\209\151"
}
local utf8_decode = {
[128] = {
[147] = "\150",
[148] = "\151",
[152] = "\145",
[153] = "\146",
[154] = "\130",
[156] = "\147",
[157] = "\148",
[158] = "\132",
[160] = "\134",
[161] = "\135",
[162] = "\149",
[166] = "\133",
[176] = "\137",
[185] = "\139",
[186] = "\155"
},
[130] = {[172] = "\136"},
[132] = {[150] = "\185", [162] = "\153"},
[194] = {
[152] = "\152",
[160] = "\160",
[164] = "\164",
[166] = "\166",
[167] = "\167",
[169] = "\169",
[171] = "\171",
[172] = "\172",
[173] = "\173",
[174] = "\174",
[176] = "\176",
[177] = "\177",
[181] = "\181",
[182] = "\182",
[183] = "\183",
[187] = "\187"
},
[208] = {
[129] = "\168",
[130] = "\128",
[131] = "\129",
[132] = "\170",
[133] = "\189",
[134] = "\178",
[135] = "\175",
[136] = "\163",
[137] = "\138",
[138] = "\140",
[139] = "\142",
[140] = "\141",
[143] = "\143",
[144] = "\192",
[145] = "\193",
[146] = "\194",
[147] = "\195",
[148] = "\196",
[149] = "\197",
[150] = "\198",
[151] = "\199",
[152] = "\200",
[153] = "\201",
[154] = "\202",
[155] = "\203",
[156] = "\204",
[157] = "\205",
[158] = "\206",
[159] = "\207",
[160] = "\208",
[161] = "\209",
[162] = "\210",
[163] = "\211",
[164] = "\212",
[165] = "\213",
[166] = "\214",
[167] = "\215",
[168] = "\216",
[169] = "\217",
[170] = "\218",
[171] = "\219",
[172] = "\220",
[173] = "\221",
[174] = "\222",
[175] = "\223",
[176] = "\224",
[177] = "\225",
[178] = "\226",
[179] = "\227",
[180] = "\228",
[181] = "\229",
[182] = "\230",
[183] = "\231",
[184] = "\232",
[185] = "\233",
[186] = "\234",
[187] = "\235",
[188] = "\236",
[189] = "\237",
[190] = "\238",
[191] = "\239"
},
[209] = {
[128] = "\240",
[129] = "\241",
[130] = "\242",
[131] = "\243",
[132] = "\244",
[133] = "\245",
[134] = "\246",
[135] = "\247",
[136] = "\248",
[137] = "\249",
[138] = "\250",
[139] = "\251",
[140] = "\252",
[141] = "\253",
[142] = "\254",
[143] = "\255",
[144] = "\161",
[145] = "\184",
[146] = "\144",
[147] = "\131",
[148] = "\186",
[149] = "\190",
[150] = "\179",
[151] = "\191",
[152] = "\188",
[153] = "\154",
[154] = "\156",
[155] = "\158",
[156] = "\157",
[158] = "\162",
[159] = "\159"
},
[210] = {[144] = "\165", [145] = "\180"}
}
local nmdc = {
[36] = "$",
[124] = "|"
}
function AnsiToUtf8(s)
local r, b = ""
for i = 1, s and s:len() or 0 do
b = s:byte(i)
if b < 128 then
r = r .. string.char(b)
else
if b > 239 then
r = r .. "\209" .. string.char(b - 112)
elseif b > 191 then
r = r .. "\208" .. string.char(b - 48)
elseif ansi_decode[b] then
r = r .. ansi_decode[b]
else
r = r .. "_"
end
end
end
return r
end
function Utf8ToAnsi(s)
local a, j, r, b = 0, 0, ""
for i = 1, s and s:len() or 0 do
b = s:byte(i)
if b < 128 then
if nmdc[b] then
r = r .. nmdc[b]
else
r = r .. string.char(b)
end
elseif a == 2 then
a, j = a - 1, b
elseif a == 1 then
--if j == nil or b == nil then return r end
--print(j)
--print(b)
--local ansi = utf8_decode[j]
--if ansi == nil then return r end
--if ansi[b] == nil then return r end
if utf8_decode[j] then
if utf8_decode[j][b] then
a, r = a - 1, r .. utf8_decode[j][b]
end
end
elseif b == 226 then
a = 2
elseif b == 194 or b == 208 or b == 209 or b == 210 then
j, a = b, 1
else
r = r .. "_"
end
end
return r
end

View File

@ -1,16 +0,0 @@
-- This mod provides the visible text on signs library used by Home Decor
-- and perhaps other mods at some point in the future. Forked from thexyz's/
-- PilzAdam's original text-on-signs mod and rewritten by Vanessa Ezekowitz
-- and Diego Martinez
signs_lib = {}
signs_lib.path = minetest.get_modpath(minetest.get_current_modname())
local S, NS = dofile(signs_lib.path .. "/intllib.lua")
signs_lib.gettext = S
dofile(signs_lib.path.."/api.lua")
dofile(signs_lib.path.."/encoding.lua")
dofile(signs_lib.path.."/standard_signs.lua")
dofile(signs_lib.path.."/compat.lua")

View File

@ -1,45 +0,0 @@
-- Fallback functions for when `intllib` is not installed.
-- Code released under Unlicense <http://unlicense.org>.
-- Get the latest version of this file at:
-- https://raw.githubusercontent.com/minetest-mods/intllib/master/lib/intllib.lua
local function format(str, ...)
local args = { ... }
local function repl(escape, open, num, close)
if escape == "" then
local replacement = tostring(args[tonumber(num)])
if open == "" then
replacement = replacement..close
end
return replacement
else
return "@"..open..num..close
end
end
return (str:gsub("(@?)@(%(?)(%d+)(%)?)", repl))
end
local gettext, ngettext
if minetest.get_modpath("intllib") then
if intllib.make_gettext_pair then
-- New method using gettext.
gettext, ngettext = intllib.make_gettext_pair()
else
-- Old method using text files.
gettext = intllib.Getter()
end
end
-- Fill in missing functions.
gettext = gettext or function(msgid, ...)
return format(msgid, ...)
end
ngettext = ngettext or function(msgid, msgid_plural, n, ...)
return format(n==1 and msgid or msgid_plural, ...)
end
return gettext, ngettext

View File

@ -1,97 +0,0 @@
# German Translation for the signs_lib mod.
# Copyright (C) 2018 Vanessa Ezekowitz
# This file is distributed under the same license as the signs_lib package.
# Xanthin, 2017.
# CodeXP <codexp@gmx.net>, 2018.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2017-07-31 18:31+0200\n"
"PO-Revision-Date: 2018-03-24 22:00+0100\n"
"Last-Translator: CodeXP <codexp@gmx.net>\n"
"Language-Team: \n"
"Language: de\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.12\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
#: init.lua
msgid "Write"
msgstr "schreiben"
#: init.lua
msgid "Locked sign, owned by @1\n"
msgstr "gesperrter Schild, gehört @1\n"
#: init.lua
msgid "locked "
msgstr "gesperrt "
#: init.lua
#, fuzzy
msgid "@1 wrote \"@2\" to @3sign at @4"
msgstr "@1 schrieb \"@2\" auf das @3Schild bei @4"
#: init.lua
msgid "Sign"
msgstr "Schild"
#: init.lua
msgid "Can edit all locked signs"
msgstr "Kann alle gesperrte Schilder bearbeiten"
#: init.lua
msgid "Locked Sign"
msgstr "gesperrter Schild"
#: init.lua
msgid "green"
msgstr "grün"
#: init.lua
msgid "yellow"
msgstr "gelb"
#: init.lua
msgid "red"
msgstr "rot"
#: init.lua
msgid "white_red"
msgstr "weißrot"
#: init.lua
msgid "white_black"
msgstr "schwarzweiß"
#: init.lua
msgid "orange"
msgstr "orange"
#: init.lua
msgid "blue"
msgstr "blau"
#: init.lua
msgid "brown"
msgstr "braun"
#: init.lua
msgid "Sign (@1, metal)"
msgstr "Schild (@1, Metall)"
#: init.lua
msgid "Attempt to register unknown node as fence"
msgstr "Versuch ein unbekanntes Element als Zaun zu registrieren"
#: init.lua
msgid "Registered @1 and @2"
msgstr "Registrierte @1 und @2"
#: init.lua
msgid "[MOD] signs loaded"
msgstr "[MOD] Schilder-Mod geladen"

View File

@ -1,95 +0,0 @@
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2017-07-31 18:22+0200\n"
"PO-Revision-Date: 2017-07-31 18:30+0200\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.12\n"
"Last-Translator: Carlos Barraza\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"Language: es\n"
#: init.lua
msgid "Locked sign, owned by @1\n"
msgstr ""
#: init.lua
msgid "locked "
msgstr "bloqueada "
#: init.lua
msgid "@1 wrote \"@2\" to @3sign at @4"
msgstr "@1 escribio \"@2\" en el cartel @3en @4"
#: init.lua
msgid "Sign"
msgstr "Letrero"
#: init.lua
msgid "Can edit all locked signs"
msgstr ""
#: init.lua
#, fuzzy
msgid "Locked Sign"
msgstr "Letrero bloqueada"
#: init.lua
msgid "green"
msgstr "verde"
#: init.lua
msgid "yellow"
msgstr "amarillo"
#: init.lua
msgid "red"
msgstr "rojo"
#: init.lua
#, fuzzy
msgid "white_red"
msgstr "rojo y blanco"
#: init.lua
#, fuzzy
msgid "white_black"
msgstr "negro y blanco"
#: init.lua
msgid "orange"
msgstr "naranja"
#: init.lua
msgid "blue"
msgstr "azul"
#: init.lua
msgid "brown"
msgstr "marrón"
#: init.lua
#, fuzzy
msgid "Sign (@1, metal)"
msgstr "Letrero (@1, metal)"
#: init.lua
msgid "Attempt to register unknown node as fence"
msgstr ""
#: init.lua
msgid "Registered @1 and @2"
msgstr "Registrado @1 y @2"
#: init.lua
msgid "[MOD] signs loaded"
msgstr "[MOD] signs cargados"

View File

@ -1,91 +0,0 @@
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2017-07-31 18:13+0200\n"
"PO-Revision-Date: 2017-07-31 18:22+0200\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 1.8.12\n"
"Last-Translator: fat115 <fat115@framasoft.org>\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
"Language: fr\n"
#: init.lua
msgid "Locked sign, owned by @1\n"
msgstr "Panneau verrouillé, appartient à @1\n"
#: init.lua
msgid "locked "
msgstr "verrouillé "
#: init.lua
msgid "@1 wrote \"@2\" to @3sign at @4"
msgstr "@1 a écrit \"@2\" sur le panneau @3en @4"
#: init.lua
msgid "Sign"
msgstr "Panneau"
#: init.lua
msgid "Can edit all locked signs"
msgstr "Peut modifier les panneaux verrouillés"
#: init.lua
msgid "Locked Sign"
msgstr "Panneau (verrouillé)"
#: init.lua
msgid "green"
msgstr "vert"
#: init.lua
msgid "yellow"
msgstr "jaune"
#: init.lua
msgid "red"
msgstr "rouge"
#: init.lua
msgid "white_red"
msgstr "rouge et blanc"
#: init.lua
msgid "white_black"
msgstr "noir et blanc"
#: init.lua
msgid "orange"
msgstr "orange"
#: init.lua
msgid "blue"
msgstr "bleu"
#: init.lua
msgid "brown"
msgstr "marron"
#: init.lua
msgid "Sign (@1, metal)"
msgstr "Panneau (@1, métal)"
#: init.lua
msgid "Attempt to register unknown node as fence"
msgstr "Tentative d'enregistrer un nœud inconnu comme barrière"
#: init.lua
msgid "Registered @1 and @2"
msgstr "Enregistrement de @1 et @"
#: init.lua
msgid "[MOD] signs loaded"
msgstr "[MOD] signs chargé"

View File

@ -1,91 +0,0 @@
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2017-07-31 18:00+0200\n"
"PO-Revision-Date: 2017-11-17 02:38+0800\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.4\n"
"Last-Translator: \n"
"Plural-Forms: nplurals=1; plural=0;\n"
"Language: ms\n"
#: init.lua
msgid "Locked sign, owned by @1\n"
msgstr "Papan tanda berkunci, milik @1\n"
#: init.lua
msgid "locked "
msgstr "berkunci "
#: init.lua
msgid "@1 wrote \"@2\" to @3sign at @4"
msgstr "@1 menulis \"@2\" atas papan tanda @3dekat @4"
#: init.lua
msgid "Sign"
msgstr "Papan Tanda"
#: init.lua
msgid "Can edit all locked signs"
msgstr "Boleh sunting semua papan tanda berkunci"
#: init.lua
msgid "Locked Sign"
msgstr "Papan Tanda Berkunci"
#: init.lua
msgid "green"
msgstr "hijau"
#: init.lua
msgid "yellow"
msgstr "kuning"
#: init.lua
msgid "red"
msgstr "merah"
#: init.lua
msgid "white_red"
msgstr "putih_merah"
#: init.lua
msgid "white_black"
msgstr "putih_hitam"
#: init.lua
msgid "orange"
msgstr "jingga"
#: init.lua
msgid "blue"
msgstr "biru"
#: init.lua
msgid "brown"
msgstr "perang"
#: init.lua
msgid "Sign (@1, metal)"
msgstr "Papan Tanda (@1, logam)"
#: init.lua
msgid "Attempt to register unknown node as fence"
msgstr "Cuba untuk mendaftar nod tidak diketahui sebagai pagar"
#: init.lua
msgid "Registered @1 and @2"
msgstr "Telah daftar @1 dan @2"
#: init.lua
msgid "[MOD] signs loaded"
msgstr "[MODS] signs telah dimuatkan"

View File

@ -1,94 +0,0 @@
# Russian Translation for the signs_lib mod.
# Copyright (C) 2018 Vanessa Ezekowitz
# This file is distributed under the same license as the signs_lib package.
# CodeXP <codexp@gmx.net>, 2018.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: signs_lib\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2018-03-24 22:23+0100\n"
"PO-Revision-Date: \n"
"Last-Translator: CodeXP <codexp@gmx.net>\n"
"Language-Team: \n"
"Language: ru\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: init.lua
msgid "Write"
msgstr "записать"
#: init.lua
msgid "Locked sign, owned by @1\n"
msgstr "защищенная табличка, пренадлежит @1\n"
#: init.lua
msgid "locked "
msgstr "защищенный "
#: init.lua
msgid "@1 wrote \"@2\" to @3sign at @4"
msgstr "@1 записал \"@2\" в @3sign на @4"
#: init.lua
msgid "Sign"
msgstr "табличка"
#: init.lua
msgid "Can edit all locked signs"
msgstr "Может редактировать все защищенные таблички"
#: init.lua
msgid "Locked Sign"
msgstr "защищенная табличка"
#: init.lua
msgid "green"
msgstr "зеленая"
#: init.lua
msgid "yellow"
msgstr "желтая"
#: init.lua
msgid "red"
msgstr "красная"
#: init.lua
msgid "white_red"
msgstr "краснобелая"
#: init.lua
msgid "white_black"
msgstr "чернобелая"
#: init.lua
msgid "orange"
msgstr "оранжевая"
#: init.lua
msgid "blue"
msgstr "синея"
#: init.lua
msgid "brown"
msgstr "коричневая"
#: init.lua
msgid "Sign (@1, metal)"
msgstr "Табличка (@1, металл)"
#: init.lua
msgid "Attempt to register unknown node as fence"
msgstr "Попытка зарегистрировать неизвестный узел как забор"
#: init.lua
msgid "Registered @1 and @2"
msgstr "Зарегистрировано @1 для @2"
#: init.lua
msgid "[MOD] signs loaded"
msgstr "[MOD] мод табличек загружен"

View File

@ -1,94 +0,0 @@
# LANGUAGE Translation for the signs_lib mod.
# Copyright (C) 2018 Vanessa Ezekowitz
# This file is distributed under the same license as the signs_lib package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: signs_lib\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2018-03-24 22:23+0100\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: init.lua
msgid "Write"
msgstr ""
#: init.lua
msgid "Locked sign, owned by @1\n"
msgstr ""
#: init.lua
msgid "locked "
msgstr ""
#: init.lua
msgid "@1 wrote \"@2\" to @3sign at @4"
msgstr ""
#: init.lua
msgid "Sign"
msgstr ""
#: init.lua
msgid "Can edit all locked signs"
msgstr ""
#: init.lua
msgid "Locked Sign"
msgstr ""
#: init.lua
msgid "green"
msgstr ""
#: init.lua
msgid "yellow"
msgstr ""
#: init.lua
msgid "red"
msgstr ""
#: init.lua
msgid "white_red"
msgstr ""
#: init.lua
msgid "white_black"
msgstr ""
#: init.lua
msgid "orange"
msgstr ""
#: init.lua
msgid "blue"
msgstr ""
#: init.lua
msgid "brown"
msgstr ""
#: init.lua
msgid "Sign (@1, metal)"
msgstr ""
#: init.lua
msgid "Attempt to register unknown node as fence"
msgstr ""
#: init.lua
msgid "Registered @1 and @2"
msgstr ""
#: init.lua
msgid "[MOD] signs loaded"
msgstr ""

View File

@ -1,2 +0,0 @@
name = signs_lib
min_minetest_version = 5.2.0

View File

@ -1,232 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'standard wooden sign.blend'
# www.blender.org
o facedir,_on_pole_Cube.005
v 0.437500 -0.312500 0.812500
v 0.437500 -0.312500 0.750000
v 0.437500 0.312500 0.750000
v -0.437500 -0.312500 0.812500
v -0.437500 -0.312500 0.750000
v -0.437500 0.312500 0.812500
v 0.437500 0.312500 0.812500
v -0.437500 0.312500 0.750000
v -0.125000 -0.187500 0.812500
v -0.125000 -0.187500 0.875000
v -0.125000 0.187500 0.875000
v 0.125000 -0.187500 0.812500
v 0.164062 -0.125000 1.164063
v -0.164063 -0.125000 1.164063
v 0.164062 -0.187500 1.164063
v -0.164063 -0.187500 1.164063
v 0.125000 0.125000 0.812500
v -0.125000 -0.125000 1.125000
v 0.164062 0.187500 0.812500
v 0.164062 0.187500 1.125000
v 0.164062 0.125000 0.812500
v 0.164062 0.125000 1.125000
v 0.125000 -0.125000 0.812500
v 0.125000 -0.125000 1.125000
v 0.164062 -0.125000 0.812500
v 0.164062 -0.187500 0.812500
v -0.164063 0.187500 0.812500
v -0.164063 0.125000 0.812500
v -0.125000 0.125000 0.812500
v -0.125000 0.125000 1.125000
v -0.164063 -0.125000 0.812500
v -0.164063 -0.125000 1.125000
v -0.164063 -0.187500 0.812500
v -0.164063 -0.187500 1.125000
v -0.125000 -0.125000 0.812500
v 0.125000 0.187500 0.875000
v 0.125000 -0.187500 0.875000
v 0.125000 0.187500 0.812500
v -0.125000 0.187500 0.812500
v 0.164062 -0.187500 1.125000
v 0.164062 -0.125000 1.125000
v -0.164063 0.125000 1.164063
v 0.164062 0.125000 1.164063
v -0.164063 0.187500 1.164063
v 0.164062 0.187500 1.164063
v -0.164063 0.125000 1.125000
v -0.164063 0.187500 1.125000
v 0.125000 -0.187500 1.125000
v 0.125000 0.187500 1.125000
v 0.125000 0.125000 1.125000
v -0.125000 0.187500 1.125000
v -0.125000 -0.187500 1.125000
v 0.125000 -0.125000 0.875000
v 0.125000 0.125000 0.875000
v -0.125000 0.125000 0.875000
v -0.125000 -0.125000 0.875000
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vt 0.843750 0.507812
vt 0.703125 0.507812
vt 0.703125 0.093750
vt 0.843750 0.093750
vt 0.015625 0.507812
vt 0.015625 0.093750
vt 0.156250 0.093750
vt 0.156250 0.507812
vt 0.453125 0.640625
vt 0.453125 0.593750
vt 0.312500 0.593750
vt 0.312500 0.640625
vt 0.234375 0.593750
vt 0.234375 0.640625
vt 0.093750 0.640625
vt 0.093750 0.593750
vt 0.312500 0.640625
vt 0.312500 0.921875
vt 0.453125 0.921875
vt 0.453125 0.640625
vt 0.703125 0.664062
vt 0.703125 0.992188
vt 0.781250 0.992188
vt 0.781250 0.664062
vt 0.484375 0.664062
vt 0.484375 0.992188
vt 0.562500 0.992188
vt 0.562500 0.664062
vt 0.921875 0.992188
vt 0.921875 0.664062
vt 0.453125 0.640625
vt 0.453125 0.593750
vt 0.312500 0.593750
vt 0.312500 0.640625
vt 0.234375 0.593750
vt 0.234375 0.640625
vt 0.093750 0.640625
vt 0.093750 0.593750
vt 0.703125 0.664062
vt 0.703125 0.992188
vt 0.781250 0.992188
vt 0.781250 0.664062
vt 0.484375 0.664062
vt 0.484375 0.992188
vt 0.562500 0.992188
vt 0.562500 0.664062
vt 0.234375 0.640625
vt 0.234375 0.921875
vt 0.093750 0.921875
vt 0.093750 0.640625
vt 0.921875 0.992188
vt 0.921875 0.664062
vt 0.093750 0.640625
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.234375 0.640625
vt 0.234375 0.921875
vt 0.093750 0.921875
vt 0.312500 0.992188
vt 0.453125 0.992188
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.312500 0.992188
vt 0.453125 0.992188
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.992188
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.992188
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.703125 0.578125
vt 0.156250 0.578125
vt 0.156250 0.031250
vt 0.703125 0.031250
vt 0.312500 0.640625
vt 0.312500 0.921875
vt 0.453125 0.921875
vt 0.453125 0.640625
vt 0.703125 0.703125
vt 0.562500 0.703125
vt 0.562500 0.953125
vt 0.703125 0.953125
vt 0.703125 0.703125
vt 0.562500 0.703125
vt 0.562500 0.953125
vt 0.703125 0.953125
vn 0.0000 0.0000 -1.0000
vn 0.0000 0.0000 1.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 1.0000 0.0000
vn 1.0000 0.0000 0.0000
vn -1.0000 0.0000 0.0000
g facedir,_on_pole_Cube.005_front-back
s off
f 8/1/1 3/2/1 2/3/1 5/4/1
f 7/5/2 6/6/2 4/7/2 1/8/2
g facedir,_on_pole_Cube.005_edges
f 4/9/3 5/10/3 2/11/3 1/12/3
f 7/13/4 3/14/4 8/15/4 6/16/4
f 7/13/5 1/17/5 2/18/5 3/14/5
f 4/9/6 6/16/6 8/15/6 5/10/6
g facedir,_on_pole_Cube.005_pole_mount
f 9/19/6 10/20/6 11/21/6 39/22/6
f 12/23/5 38/24/5 36/25/5 37/26/5
f 20/27/5 45/28/5 43/29/5 22/30/5
f 44/31/6 47/32/6 46/33/6 42/34/6
f 52/35/5 10/36/5 56/37/5 18/38/5
f 46/39/3 22/40/3 43/41/3 42/42/3
f 44/43/4 45/44/4 20/45/4 47/46/4
f 42/42/2 43/41/2 45/47/2 44/48/2
f 41/49/5 13/50/5 15/51/5 40/52/5
f 14/53/6 32/54/6 34/55/6 16/56/6
f 34/57/3 40/58/3 15/59/3 16/60/3
f 14/61/4 13/62/4 41/63/4 32/64/4
f 24/65/6 53/66/6 37/67/6 48/68/6
f 16/60/2 15/59/2 13/69/2 14/70/2
f 50/71/3 17/72/3 21/73/3 22/74/3
f 20/75/4 19/76/4 38/77/4 49/78/4
f 49/79/6 36/80/6 54/81/6 50/71/6
f 22/30/5 21/82/5 19/83/5 20/27/5
f 48/68/3 12/84/3 26/85/3 40/86/3
f 41/87/4 25/88/4 23/89/4 24/90/4
f 40/52/5 26/91/5 25/92/5 41/49/5
f 46/33/3 28/93/3 29/94/3 30/95/3
f 47/32/6 27/96/6 28/93/6 46/33/6
f 51/97/4 39/98/4 27/99/4 47/100/4
f 34/55/3 33/101/3 9/102/3 52/103/3
f 32/54/6 31/104/6 33/101/6 34/55/6
f 18/105/4 35/106/4 31/107/4 32/108/4
f 10/20/2 37/26/2 36/25/2 11/21/2
f 9/109/3 12/110/3 37/26/3 10/20/3
f 11/21/4 36/25/4 38/111/4 39/112/4
f 30/113/5 55/114/5 11/115/5 51/116/5
f 52/117/1 18/118/1 24/119/1 48/120/1
f 30/121/1 51/122/1 49/123/1 50/124/1

View File

@ -1,52 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden sign.blend'
# www.blender.org
o sign_(3)_Cube
v 0.437500 -0.312500 0.500000
v 0.437500 -0.312500 0.437500
v 0.437500 0.312500 0.500000
v 0.437500 0.312500 0.437500
v -0.437500 -0.312500 0.500000
v -0.437500 -0.312500 0.437500
v -0.437500 0.312500 0.500000
v -0.437500 0.312500 0.437500
v 0.437500 -0.312500 0.500000
v 0.437500 -0.312500 0.437500
v 0.437500 0.312500 0.500000
v 0.437500 0.312500 0.437500
v -0.437500 -0.312500 0.500000
v -0.437500 -0.312500 0.437500
v -0.437500 0.312500 0.500000
v -0.437500 0.312500 0.437500
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vn 0.0000 0.0000 -1.0000
vn 0.0000 -0.0000 1.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 1.0000 0.0000
vn 1.0000 0.0000 0.0000
vn -1.0000 0.0000 0.0000
g sign_(3)_Cube_front-back
s off
f 8/1/1 4/2/1 2/3/1 6/4/1
f 3/5/2 7/6/2 5/7/2 1/8/2
g sign_(3)_Cube_edges
f 13/9/3 14/10/3 10/11/3 9/12/3
f 11/13/4 12/14/4 16/15/4 15/16/4
f 11/13/5 9/17/5 10/18/5 12/14/5
f 13/9/6 15/16/6 16/15/6 14/10/6

View File

@ -1,15 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden hanging sign.blend'
# www.blender.org
o Plane
v 0.406250 -0.281250 -0.042969
v -0.406250 -0.281250 -0.042969
v 0.406250 0.281250 -0.042969
v -0.406250 0.281250 -0.042969
vt 0.000000 0.000000
vt 1.000000 0.000000
vt 1.000000 1.000000
vt 0.000000 1.000000
vn 0.0000 -0.0000 -1.0000
g Plane_Plane_None
s off
f 1/1/1 2/2/1 4/3/1 3/4/1

View File

@ -1,15 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden sign.blend'
# www.blender.org
o text_entity.001_Plane
v 0.406250 -0.281250 0.738281
v -0.406250 -0.281250 0.738281
v 0.406250 0.281250 0.738281
v -0.406250 0.281250 0.738281
vt 0.000000 0.000000
vt 1.000000 0.000000
vt 1.000000 1.000000
vt 0.000000 1.000000
vn 0.0000 -0.0000 -1.0000
g text_entity.001_Plane_text_entity
s off
f 1/1/1 2/2/1 4/3/1 3/4/1

View File

@ -1,15 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden sign.blend'
# www.blender.org
o text_entity_Plane
v 0.406250 -0.281250 0.425781
v -0.406250 -0.281250 0.425781
v 0.406250 0.281250 0.425781
v -0.406250 0.281250 0.425781
vt 0.000000 0.000000
vt 1.000000 0.000000
vt 1.000000 1.000000
vt 0.000000 1.000000
vn 0.0000 -0.0000 -1.0000
g text_entity_Plane_text_entity
s off
f 1/1/1 2/2/1 4/3/1 3/4/1

View File

@ -1,15 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden yard sign.blend'
# www.blender.org
o Plane
v 0.406250 -0.218750 -0.074219
v -0.406250 -0.218750 -0.074219
v 0.406250 0.343750 -0.074219
v -0.406250 0.343750 -0.074219
vt 0.000000 0.000000
vt 1.000000 0.000000
vt 1.000000 1.000000
vt 0.000000 1.000000
vn 0.0000 -0.0000 -1.0000
g Plane_Plane_None
s off
f 1/1/1 2/2/1 4/3/1 3/4/1

View File

@ -1,62 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden hanging sign.blend'
# www.blender.org
o Cube
v 0.437500 -0.312500 0.031250
v 0.437500 -0.312500 -0.031250
v 0.437500 0.312500 0.031250
v 0.437500 0.312500 -0.031250
v -0.437500 -0.312500 0.031250
v -0.437500 -0.312500 -0.031250
v -0.437500 0.312500 0.031250
v -0.437500 0.312500 -0.031250
v 0.437500 -0.312500 0.031250
v 0.437500 -0.312500 -0.031250
v 0.437500 0.312500 0.031250
v 0.437500 0.312500 -0.031250
v -0.437500 -0.312500 0.031250
v -0.437500 -0.312500 -0.031250
v -0.437500 0.312500 0.031250
v -0.437500 0.312500 -0.031250
v 0.500000 0.312500 -0.000000
v 0.500000 0.500000 0.000000
v -0.500000 0.312500 -0.000000
v -0.500000 0.500000 0.000000
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vt 1.000000 0.812500
vt 1.000000 1.000000
vt 0.000000 1.000000
vt -0.000000 0.812500
vn 0.0000 0.0000 -1.0000
vn 0.0000 -0.0000 1.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 1.0000 0.0000
vn 1.0000 -0.0000 0.0000
vn -1.0000 -0.0000 0.0000
g Cube_Cube_front-back
s off
f 8/1/1 4/2/1 2/3/1 6/4/1
f 3/5/2 7/6/2 5/7/2 1/8/2
g Cube_Cube_edges
f 13/9/3 14/10/3 10/11/3 9/12/3
f 11/13/4 12/14/4 16/15/4 15/16/4
f 11/13/5 9/17/5 10/18/5 12/14/5
f 13/9/6 15/16/6 16/15/6 14/10/6
g Cube_Cube_hangers
f 19/19/1 20/20/1 18/21/1 17/22/1

View File

@ -1,232 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'standard wooden sign.blend'
# www.blender.org
o wallmounted,_on_pole_Cube.002
v 0.437500 -0.812500 -0.312500
v 0.437500 -0.750000 -0.312500
v 0.437500 -0.750000 0.312500
v -0.437500 -0.812500 -0.312500
v -0.437500 -0.750000 -0.312500
v -0.437500 -0.812500 0.312500
v 0.437500 -0.812500 0.312500
v -0.437500 -0.750000 0.312500
v -0.125000 -0.812500 -0.187500
v -0.125000 -0.875000 -0.187500
v -0.125000 -0.875000 0.187500
v 0.125000 -0.812500 -0.187500
v 0.164062 -1.164063 -0.125000
v -0.164063 -1.164063 -0.125000
v 0.164062 -1.164063 -0.187500
v -0.164063 -1.164063 -0.187500
v 0.125000 -0.812500 0.125000
v -0.125000 -1.125000 -0.125000
v 0.164062 -0.812500 0.187500
v 0.164062 -1.125000 0.187500
v 0.164062 -0.812500 0.125000
v 0.164062 -1.125000 0.125000
v 0.125000 -0.812500 -0.125000
v 0.125000 -1.125000 -0.125000
v 0.164062 -0.812500 -0.125000
v 0.164062 -0.812500 -0.187500
v -0.164063 -0.812500 0.187500
v -0.164063 -0.812500 0.125000
v -0.125000 -0.812500 0.125000
v -0.125000 -1.125000 0.125000
v -0.164063 -0.812500 -0.125000
v -0.164063 -1.125000 -0.125000
v -0.164063 -0.812500 -0.187500
v -0.164063 -1.125000 -0.187500
v -0.125000 -0.812500 -0.125000
v 0.125000 -0.875000 0.187500
v 0.125000 -0.875000 -0.187500
v 0.125000 -0.812500 0.187500
v -0.125000 -0.812500 0.187500
v 0.164062 -1.125000 -0.187500
v 0.164062 -1.125000 -0.125000
v -0.164063 -1.164063 0.125000
v 0.164062 -1.164063 0.125000
v -0.164063 -1.164063 0.187500
v 0.164062 -1.164063 0.187500
v -0.164063 -1.125000 0.125000
v -0.164063 -1.125000 0.187500
v 0.125000 -1.125000 -0.187500
v 0.125000 -1.125000 0.187500
v 0.125000 -1.125000 0.125000
v -0.125000 -1.125000 0.187500
v -0.125000 -1.125000 -0.187500
v 0.125000 -0.875000 -0.125000
v 0.125000 -0.875000 0.125000
v -0.125000 -0.875000 0.125000
v -0.125000 -0.875000 -0.125000
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vt 0.843750 0.507812
vt 0.703125 0.507812
vt 0.703125 0.093750
vt 0.843750 0.093750
vt 0.015625 0.507812
vt 0.015625 0.093750
vt 0.156250 0.093750
vt 0.156250 0.507812
vt 0.453125 0.640625
vt 0.453125 0.593750
vt 0.312500 0.593750
vt 0.312500 0.640625
vt 0.234375 0.593750
vt 0.234375 0.640625
vt 0.093750 0.640625
vt 0.093750 0.593750
vt 0.312500 0.640625
vt 0.312500 0.921875
vt 0.453125 0.921875
vt 0.453125 0.640625
vt 0.703125 0.664062
vt 0.703125 0.992188
vt 0.781250 0.992188
vt 0.781250 0.664062
vt 0.484375 0.664062
vt 0.484375 0.992188
vt 0.562500 0.992188
vt 0.562500 0.664062
vt 0.921875 0.992188
vt 0.921875 0.664062
vt 0.453125 0.640625
vt 0.453125 0.593750
vt 0.312500 0.593750
vt 0.312500 0.640625
vt 0.234375 0.593750
vt 0.234375 0.640625
vt 0.093750 0.640625
vt 0.093750 0.593750
vt 0.703125 0.664062
vt 0.703125 0.992188
vt 0.781250 0.992188
vt 0.781250 0.664062
vt 0.484375 0.664062
vt 0.484375 0.992188
vt 0.562500 0.992188
vt 0.562500 0.664062
vt 0.234375 0.640625
vt 0.234375 0.921875
vt 0.093750 0.921875
vt 0.093750 0.640625
vt 0.921875 0.992188
vt 0.921875 0.664062
vt 0.093750 0.640625
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.234375 0.640625
vt 0.234375 0.921875
vt 0.093750 0.921875
vt 0.312500 0.992188
vt 0.453125 0.992188
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.312500 0.992188
vt 0.453125 0.992188
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.992188
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.093750 0.992188
vt 0.015625 0.992188
vt 0.015625 0.640625
vt 0.234375 0.992188
vt 0.234375 0.640625
vt 0.234375 0.992188
vt 0.312500 0.992188
vt 0.312500 0.640625
vt 0.703125 0.578125
vt 0.156250 0.578125
vt 0.156250 0.031250
vt 0.703125 0.031250
vt 0.312500 0.640625
vt 0.312500 0.921875
vt 0.453125 0.921875
vt 0.453125 0.640625
vt 0.703125 0.703125
vt 0.562500 0.703125
vt 0.562500 0.953125
vt 0.703125 0.953125
vt 0.703125 0.703125
vt 0.562500 0.703125
vt 0.562500 0.953125
vt 0.703125 0.953125
vn 0.0000 1.0000 0.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 0.0000 -1.0000
vn 0.0000 0.0000 1.0000
vn 1.0000 0.0000 0.0000
vn -1.0000 0.0000 0.0000
g wallmounted,_on_pole_Cube.002_front-back
s off
f 8/1/1 3/2/1 2/3/1 5/4/1
f 7/5/2 6/6/2 4/7/2 1/8/2
g wallmounted,_on_pole_Cube.002_edges
f 4/9/3 5/10/3 2/11/3 1/12/3
f 7/13/4 3/14/4 8/15/4 6/16/4
f 7/13/5 1/17/5 2/18/5 3/14/5
f 4/9/6 6/16/6 8/15/6 5/10/6
g wallmounted,_on_pole_Cube.002_pole_mount
f 9/19/6 10/20/6 11/21/6 39/22/6
f 12/23/5 38/24/5 36/25/5 37/26/5
f 20/27/5 45/28/5 43/29/5 22/30/5
f 44/31/6 47/32/6 46/33/6 42/34/6
f 52/35/5 10/36/5 56/37/5 18/38/5
f 46/39/3 22/40/3 43/41/3 42/42/3
f 44/43/4 45/44/4 20/45/4 47/46/4
f 42/42/2 43/41/2 45/47/2 44/48/2
f 41/49/5 13/50/5 15/51/5 40/52/5
f 14/53/6 32/54/6 34/55/6 16/56/6
f 34/57/3 40/58/3 15/59/3 16/60/3
f 14/61/4 13/62/4 41/63/4 32/64/4
f 24/65/6 53/66/6 37/67/6 48/68/6
f 16/60/2 15/59/2 13/69/2 14/70/2
f 50/71/3 17/72/3 21/73/3 22/74/3
f 20/75/4 19/76/4 38/77/4 49/78/4
f 49/79/6 36/80/6 54/81/6 50/71/6
f 22/30/5 21/82/5 19/83/5 20/27/5
f 48/68/3 12/84/3 26/85/3 40/86/3
f 41/87/4 25/88/4 23/89/4 24/90/4
f 40/52/5 26/91/5 25/92/5 41/49/5
f 46/33/3 28/93/3 29/94/3 30/95/3
f 47/32/6 27/96/6 28/93/6 46/33/6
f 51/97/4 39/98/4 27/99/4 47/100/4
f 34/55/3 33/101/3 9/102/3 52/103/3
f 32/54/6 31/104/6 33/101/6 34/55/6
f 18/105/4 35/106/4 31/107/4 32/108/4
f 10/20/2 37/26/2 36/25/2 11/21/2
f 9/109/3 12/110/3 37/26/3 10/20/3
f 11/21/4 36/25/4 38/111/4 39/112/4
f 30/113/5 55/114/5 11/115/5 51/116/5
f 52/117/1 18/118/1 24/119/1 48/120/1
f 30/121/1 51/122/1 49/123/1 50/124/1

View File

@ -1,52 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden wall sign.blend'
# www.blender.org
o Cube
v 0.437500 -0.500000 -0.312500
v 0.437500 -0.437500 -0.312500
v 0.437500 -0.500000 0.312500
v 0.437500 -0.437500 0.312500
v -0.437500 -0.500000 -0.312500
v -0.437500 -0.437500 -0.312500
v -0.437500 -0.500000 0.312500
v -0.437500 -0.437500 0.312500
v 0.437500 -0.500000 -0.312500
v 0.437500 -0.437500 -0.312500
v 0.437500 -0.500000 0.312500
v 0.437500 -0.437500 0.312500
v -0.437500 -0.500000 -0.312500
v -0.437500 -0.437500 -0.312500
v -0.437500 -0.500000 0.312500
v -0.437500 -0.437500 0.312500
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vn 0.0000 1.0000 0.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 0.0000 -1.0000
vn 0.0000 0.0000 1.0000
vn 1.0000 0.0000 0.0000
vn -1.0000 0.0000 0.0000
g Cube_Cube_front-back
s off
f 8/1/1 4/2/1 2/3/1 6/4/1
f 3/5/2 7/6/2 5/7/2 1/8/2
g Cube_Cube_edges
f 13/9/3 14/10/3 10/11/3 9/12/3
f 11/13/4 12/14/4 16/15/4 15/16/4
f 11/13/5 9/17/5 10/18/5 12/14/5
f 13/9/6 15/16/6 16/15/6 14/10/6

View File

@ -1,85 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden yard sign.blend'
# www.blender.org
o Cube
v 0.437500 -0.250000 -0.000000
v 0.437500 -0.250000 -0.062500
v 0.437500 0.375000 0.000000
v 0.437500 0.375000 -0.062500
v -0.437500 -0.250000 -0.000000
v -0.437500 -0.250000 -0.062500
v -0.437500 0.375000 0.000000
v -0.437500 0.375000 -0.062500
v 0.437500 -0.250000 -0.000000
v 0.437500 -0.250000 -0.062500
v 0.437500 0.375000 0.000000
v 0.437500 0.375000 -0.062500
v -0.437500 -0.250000 -0.000000
v -0.437500 -0.250000 -0.062500
v -0.437500 0.375000 0.000000
v -0.437500 0.375000 -0.062500
v 0.062500 -0.500000 0.000000
v 0.062500 0.250000 0.000000
v 0.062500 -0.500000 0.062500
v 0.062500 0.250000 0.062500
v -0.062500 -0.500000 0.000000
v -0.062500 0.250000 0.000000
v -0.062500 -0.500000 0.062500
v -0.062500 0.250000 0.062500
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vt 0.000000 0.750000
vt 2.000000 0.750000
vt 2.000000 0.875000
vt 0.000000 0.875000
vt 0.000000 0.125000
vt 2.000000 0.125000
vt 2.000000 0.375000
vt 0.000000 0.375000
vt 2.000000 0.500000
vt 0.000000 0.500000
vt 0.812500 0.875000
vt 0.562500 0.875000
vt 0.562500 1.000000
vt 0.812500 1.000000
vt 0.125000 0.875000
vt 0.375000 0.875000
vt 0.375000 1.000000
vt 0.125000 1.000000
vn 0.0000 0.0000 -1.0000
vn 0.0000 -0.0000 1.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 1.0000 0.0000
vn 1.0000 0.0000 0.0000
vn -1.0000 0.0000 0.0000
g Cube_Cube_front-back
s off
f 8/1/1 4/2/1 2/3/1 6/4/1
f 3/5/2 7/6/2 5/7/2 1/8/2
g Cube_Cube_edges
f 13/9/3 14/10/3 10/11/3 9/12/3
f 11/13/4 12/14/4 16/15/4 15/16/4
f 11/13/5 9/17/5 10/18/5 12/14/5
f 13/9/6 15/16/6 16/15/6 14/10/6
g Cube_Cube_default_wood
f 17/19/5 18/20/5 20/21/5 19/22/5
f 19/23/2 20/24/2 24/25/2 23/26/2
f 23/26/6 24/25/6 22/27/6 21/28/6
f 21/28/1 22/27/1 18/20/1 17/19/1
f 19/29/3 23/30/3 21/31/3 17/32/3
f 24/33/4 20/34/4 18/35/4 22/36/4

View File

@ -1,110 +0,0 @@
# Blender v2.79 (sub 0) OBJ File: 'basic_signs wooden yard sign two sticks.blend'
# www.blender.org
o Cube
v 0.437500 -0.250000 -0.000000
v 0.437500 -0.250000 -0.062500
v 0.437500 0.375000 0.000000
v -0.437500 0.375000 0.000000
v -0.437500 0.375000 -0.062500
v 0.437500 0.375000 -0.062500
v -0.437500 -0.250000 -0.000000
v -0.437500 -0.250000 -0.062500
v 0.421875 -0.500000 0.000000
v 0.421875 0.250000 0.000000
v 0.421875 -0.500000 0.031250
v 0.390625 -0.500000 0.000000
v 0.390625 0.250000 0.000000
v 0.390625 -0.500000 0.031250
v -0.390625 -0.500000 0.000000
v -0.390625 -0.500000 0.031250
v -0.421875 -0.500000 0.000000
v -0.421875 0.250000 0.000000
v -0.421875 -0.500000 0.031250
v 0.421875 0.218750 0.031250
v 0.390625 0.218750 0.031250
v -0.390625 0.250000 0.000000
v -0.390625 0.218750 0.031250
v -0.421875 0.218750 0.031250
vt 0.468750 0.812500
vt 0.031250 0.812500
vt 0.031250 0.187500
vt 0.468750 0.187500
vt 0.531250 0.812500
vt 0.968750 0.812500
vt 0.968750 0.187500
vt 0.531250 0.187500
vt 0.234375 0.000000
vt 0.234375 1.000000
vt 0.015625 1.000000
vt 0.015625 -0.000000
vt 0.609375 -0.000000
vt 0.609375 1.000000
vt 0.390625 1.000000
vt 0.390625 -0.000000
vt 0.765625 0.000000
vt 0.765625 1.000000
vt 0.000000 0.375000
vt 1.437500 0.375000
vt 1.437500 0.437500
vt 0.000000 0.437500
vt 1.500000 0.500000
vt 0.000000 0.500000
vt 1.500000 0.562500
vt 0.000000 0.562500
vt 0.750000 0.875000
vt 0.625000 0.875000
vt 0.625000 1.000000
vt 0.750000 1.000000
vt 1.437500 0.625000
vt 0.000000 0.625000
vt 0.000000 0.375000
vt 1.437500 0.375000
vt 1.437500 0.437500
vt 0.000000 0.437500
vt 1.500000 0.500000
vt 0.000000 0.500000
vt 1.500000 0.562500
vt 0.000000 0.562500
vt 0.750000 0.875000
vt 0.625000 0.875000
vt 0.625000 1.000000
vt 0.750000 1.000000
vt 1.437500 0.625000
vt 0.000000 0.625000
vt 0.312500 1.000000
vt 0.187500 1.000000
vt 0.187500 0.875000
vt 0.312500 0.875000
vt 0.312500 1.000000
vt 0.187500 1.000000
vt 0.187500 0.875000
vt 0.312500 0.875000
vn 0.0000 0.0000 -1.0000
vn 0.0000 -0.0000 1.0000
vn 0.0000 -1.0000 0.0000
vn 0.0000 1.0000 0.0000
vn 1.0000 -0.0000 0.0000
vn -1.0000 -0.0000 0.0000
vn 0.0000 0.7071 0.7071
g Cube_Cube_front-back
s off
f 5/1/1 6/2/1 2/3/1 8/4/1
f 3/5/2 4/6/2 7/7/2 1/8/2
g Cube_Cube_edges
f 7/9/3 8/10/3 2/11/3 1/12/3
f 3/13/4 6/14/4 5/15/4 4/16/4
f 3/13/5 1/17/5 2/18/5 6/14/5
f 7/9/6 4/16/6 5/15/6 8/10/6
g Cube_Cube_sticks
f 11/19/2 20/20/2 21/21/2 14/22/2
f 14/22/6 21/21/6 13/23/6 12/24/6
f 12/24/1 13/23/1 10/25/1 9/26/1
f 11/27/3 14/28/3 12/29/3 9/30/3
f 9/26/5 10/25/5 20/31/5 11/32/5
f 16/33/2 23/34/2 24/35/2 19/36/2
f 19/36/6 24/35/6 18/37/6 17/38/6
f 17/38/1 18/37/1 22/39/1 15/40/1
f 16/41/3 19/42/3 17/43/3 15/44/3
f 15/40/5 22/39/5 23/45/5 16/46/5
f 10/47/7 13/48/7 21/49/7 20/50/7
f 22/51/7 18/52/7 24/53/7 23/54/7

View File

@ -1,68 +0,0 @@
-- Definitions for standard minetest_game wooden and steel wall signs
signs_lib.register_sign("default:sign_wall_wood", {
description = "Wooden wall sign",
inventory_image = "signs_lib_sign_wall_wooden_inv.png",
tiles = {
"signs_lib_sign_wall_wooden.png",
"signs_lib_sign_wall_wooden_edges.png",
-- items 3 - 5 are not set, so signs_lib will use its standard pole
-- mount, hanging, and yard sign stick textures.
},
entity_info = "standard",
allow_hanging = true,
allow_widefont = true,
allow_onpole = true,
allow_onpole_horizontal = true,
allow_yard = true
})
signs_lib.register_sign("default:sign_wall_steel", {
description = "Steel wall sign",
inventory_image = "signs_lib_sign_wall_steel_inv.png",
tiles = {
"signs_lib_sign_wall_steel.png",
"signs_lib_sign_wall_steel_edges.png",
nil, -- not set, so it'll use the standard pole mount texture
nil, -- not set, so it'll use the standard hanging chains texture
"default_steel_block.png" -- for the yard sign's stick
},
groups = signs_lib.standard_steel_groups,
sounds = signs_lib.standard_steel_sign_sounds,
locked = true,
entity_info = "standard",
allow_hanging = true,
allow_widefont = true,
allow_onpole = true,
allow_onpole_horizontal = true,
allow_yard = true
})
minetest.register_alias("signs:sign_hanging", "default:sign_wood_hanging")
minetest.register_alias("basic_signs:hanging_sign", "default:sign_wood_hanging")
minetest.register_alias("signs:sign_yard", "default:sign_wood_yard")
minetest.register_alias("basic_signs:yard_sign", "default:sign_wood_yard")
minetest.register_alias("default:sign_wall_wood_onpole", "default:sign_wood_onpole")
minetest.register_alias("default:sign_wall_wood_onpole_horiz", "default:sign_wood_onpole_horiz")
minetest.register_alias("default:sign_wall_wood_hanging", "default:sign_wood_hanging")
minetest.register_alias("default:sign_wall_wood_yard", "default:sign_wood_yard")
minetest.register_alias("default:sign_wall_steel_onpole", "default:sign_steel_onpole")
minetest.register_alias("default:sign_wall_steel_onpole_horiz", "default:sign_steel_onpole_horiz")
minetest.register_alias("default:sign_wall_steel_hanging", "default:sign_steel_hanging")
minetest.register_alias("default:sign_wall_steel_yard", "default:sign_steel_yard")
table.insert(signs_lib.lbm_restore_nodes, "signs:sign_hanging")
table.insert(signs_lib.lbm_restore_nodes, "basic_signs:hanging_sign")
table.insert(signs_lib.lbm_restore_nodes, "signs:sign_yard")
table.insert(signs_lib.lbm_restore_nodes, "basic_signs:yard_sign")
table.insert(signs_lib.lbm_restore_nodes, "default:sign_wood_yard")
table.insert(signs_lib.lbm_restore_nodes, "default:sign_wall_wood_yard")
-- insert the old wood sign-on-fencepost into signs_lib's conversion LBM
table.insert(signs_lib.old_fenceposts_with_signs, "signs:sign_post")
signs_lib.old_fenceposts["signs:sign_post"] = "default:fence_wood"
signs_lib.old_fenceposts_replacement_signs["signs:sign_post"] = "default:sign_wall_wood_onpole"

Binary file not shown.

Before

Width:  |  Height:  |  Size: 68 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 110 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 110 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 112 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 110 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 110 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 110 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 111 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 109 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 109 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 357 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 355 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 355 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 87 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 67 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 83 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 83 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 97 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 112 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 125 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 120 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 78 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 88 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 88 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 90 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 84 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 79 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 77 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 77 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 93 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 97 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 87 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 113 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 109 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 103 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 109 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 104 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 95 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 104 B

Some files were not shown because too many files have changed in this diff Show More