(Reuses results of previous computations instead of recomputing them.)
(Cherry-picked from branch backend-optim.)
Tested on amd64/linux and i386/linux.
Other back-ends compile (after assorted updates) but are untested.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14688 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
Noticed that I had to bootstrap to test on ARM, so I commit a new bootstrap
compiler.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14479 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
14278
14277
14276
14176
14175
14173
14172
14171
14169
14168
14167
These changes need to mature on their own branch.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14329 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
This is a partial revert of revision 14168 which caused issues when
bootstrapping the compiler. Since these directories don't take long to
build, we can always use a byte-compiled compiler.
Bootstrapping and more generally working on the compiler itself does not
play nice with trying to use the most recent compiler as soon as
possible: imagine you've just modified the compiler but in a way that
breaks it at runtime in a non-obvious way; all the files that are
subsequently built will have been built with your the compiler you will
be debugging.
v2: always build tools/ with boot/ocamlc since most executables link
against compiler libs.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14277 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
-C doesn't work on at least openbsd's make so don't use it.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14173 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
The "make clean" rules were relying on the $(ROOTDIR) variable.
However this variable is only defined when ./configure runs. This broke the
usual "make clean ; ./configure && make world.opt":
< use old trunk >
./configure # config/Makefile doesn't define ROOTDIR
make world.opt
< move to new trunk >
make clean # Fails early and doesn't clean all files
./configure # config/Makefile now defines ROOTDIR
make world.opt # This fails because of left-over files
An easy solution was to run "make clean" again after configure but this is
not how everyone does and in particular, this is not how the jenkins build
bot seem to do.
The recipes for "make clean" should never rely on values defined by
configure for this exact reason.
As a simple solution, only run the commands that rely on $(ROOTDIR) if
$(ROOTDIR) is set.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14172 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
This script was built from ocamlcomp.sh.in through sed and is called
instead of "ocamlc" (for instance).
It makes it possible to switch from "ocamlc" to "ocamlc.opt" without
changing anything in the Makefiles, only calling sed.
I couldn't cleanly make it handle both a compiler for the target and for
the build. Instead I'm replacing it and doing as much as possible
directly in the Makefiles.
I hoped it would reduce the number of shell invocations, which would
speed things up quite a lot on Windows but I still had to have at least
one since it's not possible to update a make variable from inside a make
rule: i.e. it's not possible to do X=a, build a.opt and update X to be
a.opt.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@14168 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
CI failures and further testing made me find four more issues:
- forgot to rename a variable from "OCAMLDOC" to "WITH_OCAMLDOC"
(this issue was also in the non-.nt Makefile)
- syntax error in the installopt rule: missing "fi"
- testsuite doesn't have Makefile.nt so don't use -f Makefile.nt for the
"clean" rule
- had put an extra call to make "ocamltoolsopt" which in turn built the
"opt" rule in tools/ but which isn't buildable because it is used to
build profiling.cmx which, afaiu, is not available on windows (iirc it
uses posix signals to "sample" the running application).
That issue was only triggered when building "opt" and not "world.opt"
and this is why I hadn't noticed it.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13947 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
This doesn't touch the build system in build/ since it's obsolete and
unmaintained as far as I know (I'll try to remove it in a further
commit).
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13943 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(Patch by Adrien Nader!)
This makes the variable names more coherent and is in preparation for
another patch that will allow disabling ocamldoc and ocamlbuild.
This changes the interface of the configuration somewhat but I don't
think anything outside of the ocaml tree reads the Makefile.config file
that gets installed in order to see whether the debugger and camlp4 have
been built. It also changes a .mli which might be problematic but I also
believe it is safe and we have time to see if there's a bad impact.
It also adds a configure switch to skip building ocamldebug.
While at it, it fixes a PR number in the Changes file.
build: prepend "with_" to camlp4/ocamldebug-{en,dis}abling variables.
This makes the variable names more coherent and is in preparation for
another patch that will allow disabling ocamldoc and ocamlbuild.
This changes the interface of the configuration somewhat but I don't
think anything outside of the ocaml tree reads the Makefile.config file
that gets installed in order to see whether the debugger and camlp4 have
been built. It also changes a .mli which might be problematic but I also
believe it is safe and we have time to see if there's a bad impact.
It also adds a configure switch to skip building ocamldebug.
While at it, it fixes a PR number in the Changes file.
build: prepend "with_" to camlp4/ocamldebug-{en,dis}abling variables.
This makes the variable names more coherent and is in preparation for
another patch that will allow disabling ocamldoc and ocamlbuild.
This changes the interface of the configuration somewhat but I don't
think anything outside of the ocaml tree reads the Makefile.config file
that gets installed in order to see whether the debugger and camlp4 have
been built. It also changes a .mli which might be problematic but I also
believe it is safe and we have time to see if there's a bad impact.
It also adds a configure switch to skip building ocamldebug.
While at it, it fixes a PR number in the Changes file.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13942 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
(modified patch from Adrien Nader!)
Add also new comments for the new INSTALL flags.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13864 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
Fails to compile alt-ergo without frame-pointers. No time to debug
before tonight, so I revert and will merge again after fixing the
problem.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13732 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
This option can be used to tell the native compiler that it should
update frame pointers, so that debuggers and profiling tools
(especially Linux perf) can use them. For now, it is only supported
by the Unix/amd64 port.
git-svn-id: http://caml.inria.fr/svn/ocaml/trunk@13730 f963ae5c-01c2-4b8c-9fe0-0dff7051ff02
Damien Doligez
Gabriel Scherer
Xavier Leroy
Luc Maranget
Alain Frisch
Mark Shinwell
Jérémie Dimino
Wojciech Meyer
Xavier Clerc
Fabrice Le Fessant
Pierre Weis